Re: [tpmdd-devel] [PATCH] tpm_tis_spi: Use DMA-safe memory for SPI transfers

Jarkko Sakkinen <[email protected]>
Newsgroups net.sourceforge.lists.tpmdd-devel,org.kernel.vger.stable
Message-ID <[email protected]>
On Tue, 2017-07-04 at 15:56 +0200, Alexander Steffen wrote:
> The buffers used as tx_buf/rx_buf in a SPI transfer need to be DMA-safe.
> This cannot be guaranteed for the buffers passed to tpm_tis_spi_read_bytes
> and tpm_tis_spi_write_bytes. Therefore, we need to use our own DMA-safe
> buffer and copy the data to/from it.
> 
> Fixes: 0edbfea537d1 ("tpm/tpm_tis_spi: Add support for spi phy")
> Cc: [email protected]
> Signed-off-by: Alexander Steffen <[email protected]>

The commit message does not explain much how you are sorting it out and
how/why it works.

/Jarkko

> ---
>  drivers/char/tpm/tpm_tis_spi.c | 32 ++++++++++++++++++--------------
>  1 file changed, 18 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/char/tpm/tpm_tis_spi.c b/drivers/char/tpm/tpm_tis_spi.c
> index 88fe72a..5321245 100644
> --- a/drivers/char/tpm/tpm_tis_spi.c
> +++ b/drivers/char/tpm/tpm_tis_spi.c
> @@ -46,9 +46,7 @@
>  struct tpm_tis_spi_phy {
>  	struct tpm_tis_data priv;
>  	struct spi_device *spi_device;
> -
> -	u8 tx_buf[4];
> -	u8 rx_buf[4];
> +	u8 *iobuf;
>  };
>  
>  static inline struct tpm_tis_spi_phy *to_tpm_tis_spi_phy(struct tpm_tis_data *data)
> @@ -71,14 +69,14 @@ static int tpm_tis_spi_transfer(struct tpm_tis_data *data, u32 addr, u16 len,
>  	while (len) {
>  		transfer_len = min_t(u16, len, MAX_SPI_FRAMESIZE);
>  
> -		phy->tx_buf[0] = direction | (transfer_len - 1);
> -		phy->tx_buf[1] = 0xd4;
> -		phy->tx_buf[2] = addr >> 8;
> -		phy->tx_buf[3] = addr;
> +		phy->iobuf[0] = direction | (transfer_len - 1);
> +		phy->iobuf[1] = 0xd4;
> +		phy->iobuf[2] = addr >> 8;
> +		phy->iobuf[3] = addr;
>  
>  		memset(&spi_xfer, 0, sizeof(spi_xfer));
> -		spi_xfer.tx_buf = phy->tx_buf;
> -		spi_xfer.rx_buf = phy->rx_buf;
> +		spi_xfer.tx_buf = phy->iobuf;
> +		spi_xfer.rx_buf = phy->iobuf;
>  		spi_xfer.len = 4;
>  		spi_xfer.cs_change = 1;
>  
> @@ -88,9 +86,9 @@ static int tpm_tis_spi_transfer(struct tpm_tis_data *data, u32 addr, u16 len,
>  		if (ret < 0)
>  			goto exit;
>  
> -		if ((phy->rx_buf[3] & 0x01) == 0) {
> +		if ((phy->iobuf[3] & 0x01) == 0) {
>  			// handle SPI wait states
> -			phy->tx_buf[0] = 0;
> +			phy->iobuf[0] = 0;
>  
>  			for (i = 0; i < TPM_RETRY; i++) {
>  				spi_xfer.len = 1;
> @@ -99,7 +97,7 @@ static int tpm_tis_spi_transfer(struct tpm_tis_data *data, u32 addr, u16 len,
>  				ret = spi_sync_locked(phy->spi_device, &m);
>  				if (ret < 0)
>  					goto exit;
> -				if (phy->rx_buf[0] & 0x01)
> +				if (phy->iobuf[0] & 0x01)
>  					break;
>  			}
>  
> @@ -115,10 +113,9 @@ static int tpm_tis_spi_transfer(struct tpm_tis_data *data, u32 addr, u16 len,
>  
>  		if (direction) {
>  			spi_xfer.tx_buf = NULL;
> -			spi_xfer.rx_buf = buffer;
>  		} else {
> -			spi_xfer.tx_buf = buffer;
>  			spi_xfer.rx_buf = NULL;
> +			memcpy(phy->iobuf, buffer, transfer_len);
>  		}
>  
>  		spi_message_init(&m);
> @@ -127,6 +124,9 @@ static int tpm_tis_spi_transfer(struct tpm_tis_data *data, u32 addr, u16 len,
>  		if (ret < 0)
>  			goto exit;
>  
> +		if (direction)
> +			memcpy(buffer, phy->iobuf, transfer_len);
> +
>  		len -= transfer_len;
>  		buffer += transfer_len;
>  	}
> @@ -194,6 +194,10 @@ static int tpm_tis_spi_probe(struct spi_device *dev)
>  
>  	phy->spi_device = dev;
>  
> +	phy->iobuf = devm_kmalloc(&dev->dev, MAX_SPI_FRAMESIZE, GFP_KERNEL);
> +	if (!phy->iobuf)
> +		return -ENOMEM;
> +
>  	return tpm_tis_core_init(&dev->dev, &phy->priv, -1, &tpm_spi_phy_ops,
>  				 NULL);
>  }
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.