[PATCH v3 2/2] tpm_tis_spi: Use a single buffer for SPI transfers

A single buffer is sufficient for both tx and rx, since bytes that have
already been sent are not used anymore and can safely be overwritten with
the received bytes.

Signed-off-by: Alexander Steffen <Alexander.Steffen-d0qZbvYSIPpWk0Htik3J/[email protected]>
---
 drivers/char/tpm/tpm_tis_spi.c | 34 ++++++++++++++--------------------
 1 file changed, 14 insertions(+), 20 deletions(-)

diff --git a/drivers/char/tpm/tpm_tis_spi.c b/drivers/char/tpm/tpm_tis_spi.c
index 05ce841..5321245 100644
--- a/drivers/char/tpm/tpm_tis_spi.c
+++ b/drivers/char/tpm/tpm_tis_spi.c
@@ -46,9 +46,7 @@
 struct tpm_tis_spi_phy {
 	struct tpm_tis_data priv;
 	struct spi_device *spi_device;
-
-	u8 *tx_buf;
-	u8 *rx_buf;
+	u8 *iobuf;
 };
 
 static inline struct tpm_tis_spi_phy *to_tpm_tis_spi_phy(struct tpm_tis_data *data)
@@ -71,14 +69,14 @@ static int tpm_tis_spi_transfer(struct tpm_tis_data *data, u32 addr, u16 len,
 	while (len) {
 		transfer_len = min_t(u16, len, MAX_SPI_FRAMESIZE);
 
-		phy->tx_buf[0] = direction | (transfer_len - 1);
-		phy->tx_buf[1] = 0xd4;
-		phy->tx_buf[2] = addr >> 8;
-		phy->tx_buf[3] = addr;
+		phy->iobuf[0] = direction | (transfer_len - 1);
+		phy->iobuf[1] = 0xd4;
+		phy->iobuf[2] = addr >> 8;
+		phy->iobuf[3] = addr;
 
 		memset(&spi_xfer, 0, sizeof(spi_xfer));
-		spi_xfer.tx_buf = phy->tx_buf;
-		spi_xfer.rx_buf = phy->rx_buf;
+		spi_xfer.tx_buf = phy->iobuf;
+		spi_xfer.rx_buf = phy->iobuf;
 		spi_xfer.len = 4;
 		spi_xfer.cs_change = 1;
 
@@ -88,9 +86,9 @@ static int tpm_tis_spi_transfer(struct tpm_tis_data *data, u32 addr, u16 len,
 		if (ret < 0)
 			goto exit;
 
-		if ((phy->rx_buf[3] & 0x01) == 0) {
+		if ((phy->iobuf[3] & 0x01) == 0) {
 			// handle SPI wait states
-			phy->tx_buf[0] = 0;
+			phy->iobuf[0] = 0;
 
 			for (i = 0; i < TPM_RETRY; i++) {
 				spi_xfer.len = 1;
@@ -99,7 +97,7 @@ static int tpm_tis_spi_transfer(struct tpm_tis_data *data, u32 addr, u16 len,
 				ret = spi_sync_locked(phy->spi_device, &m);
 				if (ret < 0)
 					goto exit;
-				if (phy->rx_buf[0] & 0x01)
+				if (phy->iobuf[0] & 0x01)
 					break;
 			}
 
@@ -117,7 +115,7 @@ static int tpm_tis_spi_transfer(struct tpm_tis_data *data, u32 addr, u16 len,
 			spi_xfer.tx_buf = NULL;
 		} else {
 			spi_xfer.rx_buf = NULL;
-			memcpy(phy->tx_buf, buffer, transfer_len);
+			memcpy(phy->iobuf, buffer, transfer_len);
 		}
 
 		spi_message_init(&m);
@@ -127,7 +125,7 @@ static int tpm_tis_spi_transfer(struct tpm_tis_data *data, u32 addr, u16 len,
 			goto exit;
 
 		if (direction)
-			memcpy(buffer, phy->rx_buf, transfer_len);
+			memcpy(buffer, phy->iobuf, transfer_len);
 
 		len -= transfer_len;
 		buffer += transfer_len;
@@ -196,12 +194,8 @@ static int tpm_tis_spi_probe(struct spi_device *dev)
 
 	phy->spi_device = dev;
 
-	phy->tx_buf = devm_kmalloc(&dev->dev, MAX_SPI_FRAMESIZE, GFP_KERNEL);
-	if (!phy->tx_buf)
-		return -ENOMEM;
-
-	phy->rx_buf = devm_kmalloc(&dev->dev, MAX_SPI_FRAMESIZE, GFP_KERNEL);
-	if (!phy->rx_buf)
+	phy->iobuf = devm_kmalloc(&dev->dev, MAX_SPI_FRAMESIZE, GFP_KERNEL);
+	if (!phy->iobuf)
 		return -ENOMEM;
 
 	return tpm_tis_core_init(&dev->dev, &phy->priv, -1, &tpm_spi_phy_ops,
-- 
2.7.4


------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot