[PATCH RESEND v3 2/2] tpm_tis_spi: Use a single buffer for SPI transfers

Alexander Steffen <[email protected]>
Newsgroups net.sourceforge.lists.tpmdd-devel,org.kernel.vger.linux-kernel,org.kernel.vger.linux-security-module
Message-ID <[email protected]>
A single buffer is sufficient for both tx and rx, since bytes that have
already been sent are not used anymore and can safely be overwritten with
the received bytes.

Signed-off-by: Alexander Steffen <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
---
 drivers/char/tpm/tpm_tis_spi.c | 34 ++++++++++++++--------------------
 1 file changed, 14 insertions(+), 20 deletions(-)

diff --git a/drivers/char/tpm/tpm_tis_spi.c b/drivers/char/tpm/tpm_tis_spi.c
index 05ce841..5321245 100644
--- a/drivers/char/tpm/tpm_tis_spi.c
+++ b/drivers/char/tpm/tpm_tis_spi.c
@@ -46,9 +46,7 @@
 struct tpm_tis_spi_phy {
 	struct tpm_tis_data priv;
 	struct spi_device *spi_device;
-
-	u8 *tx_buf;
-	u8 *rx_buf;
+	u8 *iobuf;
 };
 
 static inline struct tpm_tis_spi_phy *to_tpm_tis_spi_phy(struct tpm_tis_data *data)
@@ -71,14 +69,14 @@ static int tpm_tis_spi_transfer(struct tpm_tis_data *data, u32 addr, u16 len,
 	while (len) {
 		transfer_len = min_t(u16, len, MAX_SPI_FRAMESIZE);
 
-		phy->tx_buf[0] = direction | (transfer_len - 1);
-		phy->tx_buf[1] = 0xd4;
-		phy->tx_buf[2] = addr >> 8;
-		phy->tx_buf[3] = addr;
+		phy->iobuf[0] = direction | (transfer_len - 1);
+		phy->iobuf[1] = 0xd4;
+		phy->iobuf[2] = addr >> 8;
+		phy->iobuf[3] = addr;
 
 		memset(&spi_xfer, 0, sizeof(spi_xfer));
-		spi_xfer.tx_buf = phy->tx_buf;
-		spi_xfer.rx_buf = phy->rx_buf;
+		spi_xfer.tx_buf = phy->iobuf;
+		spi_xfer.rx_buf = phy->iobuf;
 		spi_xfer.len = 4;
 		spi_xfer.cs_change = 1;
 
@@ -88,9 +86,9 @@ static int tpm_tis_spi_transfer(struct tpm_tis_data *data, u32 addr, u16 len,
 		if (ret < 0)
 			goto exit;
 
-		if ((phy->rx_buf[3] & 0x01) == 0) {
+		if ((phy->iobuf[3] & 0x01) == 0) {
 			// handle SPI wait states
-			phy->tx_buf[0] = 0;
+			phy->iobuf[0] = 0;
 
 			for (i = 0; i < TPM_RETRY; i++) {
 				spi_xfer.len = 1;
@@ -99,7 +97,7 @@ static int tpm_tis_spi_transfer(struct tpm_tis_data *data, u32 addr, u16 len,
 				ret = spi_sync_locked(phy->spi_device, &m);
 				if (ret < 0)
 					goto exit;
-				if (phy->rx_buf[0] & 0x01)
+				if (phy->iobuf[0] & 0x01)
 					break;
 			}
 
@@ -117,7 +115,7 @@ static int tpm_tis_spi_transfer(struct tpm_tis_data *data, u32 addr, u16 len,
 			spi_xfer.tx_buf = NULL;
 		} else {
 			spi_xfer.rx_buf = NULL;
-			memcpy(phy->tx_buf, buffer, transfer_len);
+			memcpy(phy->iobuf, buffer, transfer_len);
 		}
 
 		spi_message_init(&m);
@@ -127,7 +125,7 @@ static int tpm_tis_spi_transfer(struct tpm_tis_data *data, u32 addr, u16 len,
 			goto exit;
 
 		if (direction)
-			memcpy(buffer, phy->rx_buf, transfer_len);
+			memcpy(buffer, phy->iobuf, transfer_len);
 
 		len -= transfer_len;
 		buffer += transfer_len;
@@ -196,12 +194,8 @@ static int tpm_tis_spi_probe(struct spi_device *dev)
 
 	phy->spi_device = dev;
 
-	phy->tx_buf = devm_kmalloc(&dev->dev, MAX_SPI_FRAMESIZE, GFP_KERNEL);
-	if (!phy->tx_buf)
-		return -ENOMEM;
-
-	phy->rx_buf = devm_kmalloc(&dev->dev, MAX_SPI_FRAMESIZE, GFP_KERNEL);
-	if (!phy->rx_buf)
+	phy->iobuf = devm_kmalloc(&dev->dev, MAX_SPI_FRAMESIZE, GFP_KERNEL);
+	if (!phy->iobuf)
 		return -ENOMEM;
 
 	return tpm_tis_core_init(&dev->dev, &phy->priv, -1, &tpm_spi_phy_ops,
-- 
2.7.4
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.