[linux-nfc] Re: [PATCH] NFC: NCI: make parent aware in PM terms

On 19/08/2021 16:02, Oliver Neukum wrote:
> The NCI device is a child of an i2c device.
> If the i2c layer uses runtime PM the power to
> the NFC device can be cut whenever the i2c
> layer is done transmitting data to the NFC
> device.
> Under these conditions NFC can not work, as
> it needs power to wait for reception of packets.

Hi,

Thanks for the patch.
However this
is unparseable.
Please wrap commit
message around 75th character:
https://elixir.bootlin.com/linux/v5.13/source/Documentation/process/submitting-patches.rst#L124

The subject prefix: "nfc: nxp-nci: "

Please also Cc all people and lists. You missed here netdev
and linux-kernel, so this cannot be applied.

> 
> The necessary extension of runtime PM
> to the NFC device requires that it
> be activated as a child of the i2c device.
> It is not necessary to do any runtime PM
> operations. This will disable runtime PM
> for this branch of the tree, but otherwise
> the NFC device is inoperable.
> 
> Signed-off-by: Oliver Neukum <[email protected]>
> ---
>  drivers/nfc/nxp-nci/i2c.c | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/drivers/nfc/nxp-nci/i2c.c b/drivers/nfc/nxp-nci/i2c.c
> index 94f7f6d9cbad..dba78a5d217a 100644
> --- a/drivers/nfc/nxp-nci/i2c.c
> +++ b/drivers/nfc/nxp-nci/i2c.c
> @@ -18,6 +18,7 @@
>  #include <linux/interrupt.h>
>  #include <linux/module.h>
>  #include <linux/nfc.h>
> +#include <linux/pm_runtime.h>
>  #include <linux/gpio/consumer.h>
>  #include <asm/unaligned.h>
>  
> @@ -261,6 +262,7 @@ static int nxp_nci_i2c_probe(struct i2c_client *client,
>  {
>  	struct device *dev = &client->dev;
>  	struct nxp_nci_i2c_phy *phy;
> +	struct nfc_dev *ndev;
>  	int r;
>  
>  	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
> @@ -297,6 +299,11 @@ static int nxp_nci_i2c_probe(struct i2c_client *client,
>  	if (r < 0)
>  		return r;
>  
> +	ndev = phy->ndev->nfc_dev;
> +	pm_runtime_set_active(&ndev->dev);
> +	pm_runtime_enable(&ndev->dev);
> +	pm_runtime_mark_last_busy(&ndev->dev);

Setting PM for someone else does not look correct. This breaks
encapsulation and separation of these files. The NCI device
(nxp_nci_probe() and other parts of core.c) should instead manage
it's own runtime PM.

> +
>  	r = request_threaded_irq(client->irq, NULL,
>  				 nxp_nci_i2c_irq_thread_fn,
>  				 IRQF_TRIGGER_RISING | IRQF_ONESHOT,
> @@ -310,9 +317,12 @@ static int nxp_nci_i2c_probe(struct i2c_client *client,
>  static int nxp_nci_i2c_remove(struct i2c_client *client)
>  {
>  	struct nxp_nci_i2c_phy *phy = i2c_get_clientdata(client);
> +	struct nfc_dev *ndev = phy->ndev->nfc_dev;
>  
>  	nxp_nci_remove(phy->ndev);
>  	free_irq(client->irq, phy);
> +	pm_runtime_disable(&ndev->dev);
> +	pm_runtime_set_suspended(&ndev->dev);
>  
>  	return 0;
>  }
> 


Best regards,
Krzysztof
_______________________________________________
Linux-nfc mailing list -- [email protected]
To unsubscribe send an email to [email protected]
%(web_page_url)slistinfo%(cgiext)s/%(_internal_name)s