[ath9k-devel] [PATCH 2/2] ath9k: Fix LED polarity for some Mini PCI AR9220 MB92 cards.
Vittorio Gambaletta (VittGam) <[email protected]>
| Newsgroups | org.ath9k.lists.ath9k-devel,org.kernel.vger.linux-wireless,org.kernel.vger.stable |
|---|---|
| Message-ID | <[email protected]> |
The Wistron DNMA-92 and Compex WLM200NX have inverted LED polarity (active high instead of active low). The same PCI Subsystem ID is used by both cards, which are based on the same Atheros MB92 design. Cc: <[email protected]> Cc: <[email protected]> Cc: <[email protected]> Cc: <[email protected]> Signed-off-by: Vittorio Gambaletta <[email protected]> --- --- a/drivers/net/wireless/ath/ath9k/pci.c +++ b/drivers/net/wireless/ath/ath9k/pci.c @@ -28,6 +28,16 @@ static const struct pci_device_id ath_pci_id_table[] = { { PCI_VDEVICE(ATHEROS, 0x0024) }, /* PCI-E */ { PCI_VDEVICE(ATHEROS, 0x0027) }, /* PCI */ { PCI_VDEVICE(ATHEROS, 0x0029) }, /* PCI */ + +#ifdef CONFIG_ATH9K_PCOEM + /* Mini PCI AR9220 MB92 cards: Compex WLM200NX, Wistron DNMA-92 */ + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x0029, + PCI_VENDOR_ID_ATHEROS, + 0x2096), + .driver_data = ATH9K_PCI_LED_ACT_HI }, +#endif + { PCI_VDEVICE(ATHEROS, 0x002A) }, /* PCI-E */ #ifdef CONFIG_ATH9K_PCOEM