[ath9k-devel] [RFC 1/3] Documentation: dt-bindings: add IEEE 802.11 binding documentation

This adds the documentation for the generic IEEE 802.111 binding, which
currently allows enabling and disabling the 2.4GHz and 5GHz band.

Signed-off-by: Martin Blumenstingl <[email protected]>
---
 Documentation/devicetree/bindings/net/wireless/ieee80211.txt | 12 ++++++++++++
 1 file changed, 12 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/wireless/ieee80211.txt

diff --git a/Documentation/devicetree/bindings/net/wireless/ieee80211.txt b/Documentation/devicetree/bindings/net/wireless/ieee80211.txt
new file mode 100644
index 0000000..41fab97
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/wireless/ieee80211.txt
@@ -0,0 +1,12 @@
+The following properties are common to the IEEE 802.11 controllers:
+
+- enable-ieee80211-2ghz: indicates that the 2.4GHz frequency band should be
+  enabled for this device. This must not be used together with the
+  "disable-ieee80211-2ghz" at the same time.
+- enable-ieee80211-5ghz: indicates that the 5GHz frequency band should be
+  enabled for this device. This must not be used together with the
+  "disable-ieee80211-5ghz" at the same time.
+- disable-ieee80211-2ghz: indicates that the 2.4GHz frequency band should be
+  disabled for this device.
+- disable-ieee80211-5ghz: indicates that the 5GHz frequency band should be
+  disabled for this device
-- 
2.10.0