[PATCH 6.12.y-cip 19/26] irqchip/renesas-rzg2l: Drop IRQC_IRQ_COUNT macro

From: Biju Das <[email protected]>

[ Upstream commit f9544cad3600f251a7d24c2fb77e7f2abdceb42e ]

The total number of external interrupts in RZ/G2L and RZ/G3L SoC are
different. The RZ/G3L has 16 external interrupts whereas RZ/G2L has only 8
external interrupts. Add irq_count variable in struct rzg2l_hw_info to
handle these differences and drop the macro IRQC_IRQ_COUNT.

Signed-off-by: Biju Das <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Biju Das <[email protected]>
---
 drivers/irqchip/irq-renesas-rzg2l.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/irqchip/irq-renesas-rzg2l.c b/drivers/irqchip/irq-renesas-rzg2l.c
index 73f6e86b57d6..86e79f1484c2 100644
--- a/drivers/irqchip/irq-renesas-rzg2l.c
+++ b/drivers/irqchip/irq-renesas-rzg2l.c
@@ -22,7 +22,6 @@
 #include <linux/syscore_ops.h>
 
 #define IRQC_IRQ_START			1
-#define IRQC_IRQ_COUNT			8
 #define IRQC_TINT_COUNT			32
 
 #define ISCR				0x10
@@ -69,10 +68,12 @@ struct rzg2l_irqc_reg_cache {
 
 /**
  * struct rzg2l_hw_info - Interrupt Control Unit controller hardware info structure.
+ * @irq_count:		Number of IRQC interrupts
  * @tint_start:		Start of TINT interrupts
  * @num_irq:		Total Number of interrupts
  */
 struct rzg2l_hw_info {
+	unsigned int	irq_count;
 	unsigned int	tint_start;
 	unsigned int	num_irq;
 };
@@ -570,7 +571,7 @@ static int rzg2l_irqc_alloc(struct irq_domain *domain, unsigned int virq,
 	 * from 16-31 bits. TINT from the pinctrl driver needs to be programmed
 	 * in IRQC registers to enable a given gpio pin as interrupt.
 	 */
-	if (hwirq > IRQC_IRQ_COUNT) {
+	if (hwirq > priv->info.irq_count) {
 		tint = TINT_EXTRACT_GPIOINT(hwirq);
 		hwirq = TINT_EXTRACT_HWIRQ(hwirq);
 		chip = priv->tint_chip;
@@ -693,8 +694,9 @@ static int rzg2l_irqc_common_init(struct device_node *node, struct device_node *
 }
 
 static const struct rzg2l_hw_info rzg2l_hw_params = {
-	.tint_start	= IRQC_IRQ_START + IRQC_IRQ_COUNT,
-	.num_irq	= IRQC_IRQ_START + IRQC_IRQ_COUNT + IRQC_TINT_COUNT,
+	.irq_count	= 8,
+	.tint_start	= IRQC_IRQ_START + 8,
+	.num_irq	= IRQC_IRQ_START + 8 + IRQC_TINT_COUNT,
 };
 
 static int rzg2l_irqc_init(struct device_node *node, struct device_node *parent)
-- 
2.43.0