[PATCH 6.12.y-cip 23/23] arm64: dts: renesas: r9a08g046l48-smarc: Add gpio keys

From: Biju Das <[email protected]>

[ Upstream commit 662ce0d73322d17614b86b641aa0ff27a254c87b ]

RZ/G3L SMARC EVK  has 3 user buttons called USER_SW1, USER_SW2 and
USER_SW3.  Instantiate the gpio-keys driver for these buttons by
removing place holders and replacing proper pins for the buttons.

USER_SW{1,2,3} are configured as wakeup-sources, so they can wake up the
system during s2idle.

Signed-off-by: Biju Das <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Biju Das <[email protected]>
---
 .../boot/dts/renesas/r9a08g046l48-smarc.dts   | 26 ++++++++++++++-----
 .../boot/dts/renesas/rzg3l-smarc-som.dtsi     | 17 ++++++++++++
 2 files changed, 37 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/r9a08g046l48-smarc.dts b/arch/arm64/boot/dts/renesas/r9a08g046l48-smarc.dts
index 0ae052238b3b..ef00e316fbde 100644
--- a/arch/arm64/boot/dts/renesas/r9a08g046l48-smarc.dts
+++ b/arch/arm64/boot/dts/renesas/r9a08g046l48-smarc.dts
@@ -7,10 +7,18 @@
 
 /dts-v1/;
 
-/* Add place holder to avoid compilation error with renesas-smarc2.dtsi */
-#define KEY_1_GPIO		1
-#define KEY_2_GPIO		2
-#define KEY_3_GPIO		3
+/* Switch selection settings */
+#define RZ_BOOT_MODE3		1
+#define SW_DPI_EN		0
+#define SW_GPIO4		1
+
+#define PMOD_GPIO4		0
+#define PMOD_GPIO6		0
+#define PMOD_GPIO7		0
+
+#define KEY_1_GPIO		RZG3L_GPIO(J, 3)
+#define KEY_2_GPIO		RZG3L_GPIO(6, 4)
+#define KEY_3_GPIO		RZG3L_GPIO(6, 5)
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
@@ -30,11 +38,17 @@ aliases {
 };
 
 &keys {
-	status = "disabled";
-
+#if !RZ_BOOT_MODE3 || !SW_GPIO4 || PMOD_GPIO4
 	/delete-node/ key-1;
+#endif
+
+#if SW_DPI_EN || PMOD_GPIO6
 	/delete-node/ key-2;
+#endif
+
+#if SW_DPI_EN || PMOD_GPIO7
 	/delete-node/ key-3;
+#endif
 };
 
 &pinctrl {
diff --git a/arch/arm64/boot/dts/renesas/rzg3l-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg3l-smarc-som.dtsi
index f53e6332e2f4..1e4c929d7081 100644
--- a/arch/arm64/boot/dts/renesas/rzg3l-smarc-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg3l-smarc-som.dtsi
@@ -5,6 +5,23 @@
  * Copyright (C) 2026 Renesas Electronics Corp.
  */
 
+/*
+ * Please set the below switch position on the SoM and the corresponding macro
+ * on the board DTS:
+ *
+ * Switch position SYS.5, Macro SW_DPI_EN:
+ *      0 - Select multiple SMARC signals active
+ *      1 - Select LCD
+ *
+ * Switch position BOOT.1, Macro RZ_BOOT_MODE3:
+ *      0 - Select JTAG enabled
+ *      1 - Select SDIO {CD,IOVS,PWEN} and GPIO4 Active
+ *
+ * Switch position SW_GPIO4, Macro SW_GPIO4:
+ *      0 - Select RZ_VBAT_TAMPER (position 2-1)
+ *      1 - Select GPIO4 (position 2-3)
+ */
+
 / {
 	compatible = "renesas,rzg3l-smarcm", "renesas,r9a08g046l48", "renesas,r9a08g046";
 
-- 
2.43.0