RE: [cip-dev] [PATCH 6.12.y-cip 00/11] Add pin configuration and GPIO IRQ support to Renesas RZ/T2H SoC

Hi all,

> -----Original Message-----
> From: [email protected] <[email protected]> On
> Behalf Of Nobuhiro Iwamatsu via lists.cip-project.org
> Sent: Monday, July 6, 2026 4:36 PM
> To: [email protected]; [email protected];
> [email protected]
> Cc: [email protected]
> Subject: Re: [cip-dev] [PATCH 6.12.y-cip 00/11] Add pin configuration and
> GPIO IRQ support to Renesas RZ/T2H SoC
> 
> Hi all,
> 
> > -----Original Message-----
> > From: Lad Prabhakar <[email protected]>
> > Sent: Tuesday, June 30, 2026 7:53 AM
> > To: [email protected]; iwamatsu nobuhiro(岩松 信洋 □ＤＩＴＣ○
> > ＣＰＴ) <[email protected]>; Pavel Machek
> > <[email protected]>
> > Cc: Biju Das <[email protected]>
> > Subject: [PATCH 6.12.y-cip 00/11] Add pin configuration and GPIO IRQ
> > support to Renesas RZ/T2H SoC
> >
> > Hi All,
> >
> > This patch series aims to backport pin configuration and GPIO IRQ
> > support to Renesas RZ/T2H and RZ/N2H SoCs. Enabling of GPIO IRQ
> > support to SoC/board DTS/I will be done as a follow-up series along with
> xSPI support.
> >
> > All the patches have been cherry-picked from upstream kernel 7.2-rc1.
> > Patches apply on top v6.12.94-cip26 (commit-id e00178e6fe853).
> >
> > Cheers,
> > Prabhakar
> >
> > Cosmin Tanislav (4):
> >   pinctrl: renesas: rzt2h: Move GPIO enable/disable into separate
> >     function
> >   pinctrl: renesas: rzt2h: Allow .get_direction() for IRQ function GPIOs
> >   pinctrl: renesas: rzt2h: Add GPIO IRQ chip to handle interrupts
> >   pinctrl: renesas: rzt2h: Fix invalid wait context
> >
> > Felix Gu (1):
> >   pinctrl: renesas: rzt2h: Fix device node leak in
> > rzt2h_gpio_register()
> >
> > Geert Uytterhoeven (3):
> >   bitfield: Add less-checking __FIELD_{GET,PREP}()
> >   bitfield: Add non-constant field_{prep,get}() helpers
> >   pinctrl: renesas: Remove unneeded semicolons
> >
> > Lad Prabhakar (3):
> >   pinctrl: renesas: rzt2h: Add pin configuration support
> >   pinctrl: renesas: rzt2h: Remove unused variable in
> >     rzt2h_pinctrl_register()
> >   pinctrl: renesas: rzt2h: Skip PFC mode configuration if already set
> >
> >  drivers/pinctrl/renesas/Kconfig         |   2 +
> >  drivers/pinctrl/renesas/pinctrl-rzt2h.c | 536
> > +++++++++++++++++++++++-
> > drivers/pinctrl/renesas/pinctrl-rzv2m.c |  10 +-
> >  include/linux/bitfield.h                |  95 ++++-
> >  4 files changed, 608 insertions(+), 35 deletions(-)
> >
> 
> I reviewed this. and looks good to me.
> I can apply this if tests are OK and there are no other comments.
>   Reviewed-by: Nobuhiro Iwamatsu <[email protected]>
> 
> Test:
> https://gitlab.com/cip-project/cip-kernel/linux-cip/-/pipelines/2654357227
> 

I had forgotten that v2 existed. I won't apply this series.

Best regards,
  Nobuhiro