[PATCH 6.1.y-cip v2 17/22] phy: renesas: rcar-gen3-usb2: Add support for the RZ/G3S SoC

From: Claudiu Beznea <[email protected]>

commit 3c2ea12a625dbf5a864f4920235fa1c739d06e7d upstream.

Add support for the Renesas RZ/G3S SoC. The support is similar with the
rest of RZ/G2 devices with the except that the RZ/G3S needs bus
initialization due to hardware limitation.

Signed-off-by: Claudiu Beznea <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
[claudiu.beznea: fixed conflict with v2h driver data by keeping both of
 them; moved g3s driver data above v2h driver data to have them
 alphanumerically sorted]
Signed-off-by: Claudiu Beznea <[email protected]>
---

Changes in v2:
- none

 drivers/phy/renesas/phy-rcar-gen3-usb2.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
index 65cca04c374f..9507ebb6b13d 100644
--- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
@@ -604,6 +604,12 @@ static const struct rcar_gen3_phy_drv_data rz_g2l_phy_usb2_data = {
 	.no_adp_ctrl = true,
 };
 
+static const struct rcar_gen3_phy_drv_data rz_g3s_phy_usb2_data = {
+	.phy_usb2_ops = &rcar_gen3_phy_usb2_ops,
+	.no_adp_ctrl = true,
+	.init_bus = true,
+};
+
 static const struct rcar_gen3_phy_drv_data rz_v2h_phy_usb2_data = {
 	.phy_usb2_ops = &rcar_gen3_phy_usb2_ops,
 	.no_adp_ctrl = true,
@@ -635,6 +641,10 @@ static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
 		.compatible = "renesas,rzg2l-usb2-phy",
 		.data = &rz_g2l_phy_usb2_data,
 	},
+	{
+		.compatible = "renesas,usb2-phy-r9a08g045",
+		.data = &rz_g3s_phy_usb2_data,
+	},
 	{
 		.compatible = "renesas,rcar-gen3-usb2-phy",
 		.data = &rcar_gen3_phy_usb2_data,
-- 
2.43.0