[PATCH 6.12.y-cip 07/18] dt-bindings: pinctrl: renesas,r9a09g077-pinctrl: Document GPIO IRQ

Cosmin Tanislav <[email protected]>
Newsgroups org.cip-project.lists.cip-dev
Message-ID <[email protected]>
commit 8b12070746854a70bd43d5763562561efc1840de upstream.

The Renesas RZ/T2H (R9A09G077) and Renesas RZ/N2H (R9A09G087) SoCs have
IRQ-capable pins handled by the ICU, which forwards them to the GIC.

The ICU supports 16 IRQ lines, the pins map to these lines arbitrarily,
and the mapping is not configurable.

Document the required properties to handle GPIO IRQ.

Signed-off-by: Cosmin Tanislav <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Cosmin Tanislav <[email protected]>
---
 .../bindings/pinctrl/renesas,r9a09g077-pinctrl.yaml | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,r9a09g077-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,r9a09g077-pinctrl.yaml
index d622cd94340a..63993b20524f 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,r9a09g077-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,r9a09g077-pinctrl.yaml
@@ -49,6 +49,17 @@ properties:
   gpio-ranges:
     maxItems: 1
 
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description:
+      The first cell contains the global GPIO port index, constructed using the
+      RZT2H_GPIO() helper macro from <dt-bindings/pinctrl/renesas,r9a09g077-pinctrl.h>
+      and the second cell is used to specify the flag.
+      E.g. "interrupts = <RZT2H_GPIO(8, 6) IRQ_TYPE_EDGE_FALLING>;" if P08_6 is
+      being used as an interrupt.
+
   clocks:
     maxItems: 1
 
@@ -156,6 +167,8 @@ examples:
         gpio-controller;
         #gpio-cells = <2>;
         gpio-ranges = <&pinctrl 0 0 288>;
+        interrupt-controller;
+        #interrupt-cells = <2>;
         power-domains = <&cpg>;
 
         serial0-pins {
-- 
2.55.0
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.