[PATCH v8 15/26] dma/dpaa: add SG data validation and ERR050757

Hemant Agrawal <[email protected]>
Newsgroups org.dpdk.dev
Message-ID <[email protected]>
From: Gagandeep Singh <[email protected]>

Add scatter-gather (SG) support to the QDMA driver, enabled by default
via the s_sg_enable flag. Add optional data validation mode controlled
by the s_data_validation flag for debugging transfer correctness.

Add a workaround for hardware errata ERR050757: when
RTE_DMA_DPAA_ERRATA_ERR050757 is defined, configure the source frame
descriptor with stride settings (sss/ssd = FSL_QDMA_CMD_SS_ERR050757_LEN)
to force PCI read transactions to stay within the errata-safe length
limit, preventing data corruption on affected silicon.

Signed-off-by: Gagandeep Singh <[email protected]>
---
 drivers/dma/dpaa/dpaa_qdma.c | 77 +++++++++++++++++++++++++-----------
 1 file changed, 54 insertions(+), 23 deletions(-)

diff --git a/drivers/dma/dpaa/dpaa_qdma.c b/drivers/dma/dpaa/dpaa_qdma.c
index 3981bf277e..92c95d59fc 100644
--- a/drivers/dma/dpaa/dpaa_qdma.c
+++ b/drivers/dma/dpaa/dpaa_qdma.c
@@ -11,6 +11,11 @@
 
 static uint32_t s_sg_max_entry_sz = 2000;
 static bool s_hw_err_check;
+static int s_data_validation;
+static int s_sg_enable = 1;
+#ifdef RTE_DMA_DPAA_ERRATA_ERR050757
+static int s_pci_read = 1;
+#endif
 
 #define DPAA_DMA_ERROR_CHECK "dpaa_dma_err_check"
 
@@ -112,7 +117,8 @@ dma_pool_alloc(char *nm, int size, int aligned, dma_addr_t *phy_addr)
 	if (!virt_addr)
 		return NULL;
 
-	*phy_addr = rte_mem_virt2iova(virt_addr);
+	if (phy_addr)
+		*phy_addr = rte_mem_virt2iova(virt_addr);
 
 	return virt_addr;
 }
@@ -392,6 +398,8 @@ fsl_qdma_data_validation(struct fsl_qdma_desc *desc[],
 	char err_msg[512];
 	int offset;
 
+	if (likely(!s_data_validation))
+		return;
 
 	offset = sprintf(err_msg, "Fatal TC%d/queue%d: ",
 		fsl_queue->block_id,
@@ -716,19 +724,21 @@ fsl_qdma_enqueue_desc_single(struct fsl_qdma_queue *fsl_queue,
 	ft = fsl_queue->ft[fsl_queue->ci];
 
 #ifdef RTE_DMA_DPAA_ERRATA_ERR050757
-	sdf = &ft->df.sdf;
-	sdf->srttype = FSL_QDMA_CMD_RWTTYPE;
+	if (s_pci_read) {
+		sdf = &ft->df.sdf;
+		sdf->srttype = FSL_QDMA_CMD_RWTTYPE;
 #ifdef RTE_DMA_DPAA_ERRATA_ERR050265
-	sdf->prefetch = 1;
+		sdf->prefetch = 1;
 #endif
-	if (len > FSL_QDMA_CMD_SS_ERR050757_LEN) {
-		sdf->ssen = 1;
-		sdf->sss = FSL_QDMA_CMD_SS_ERR050757_LEN;
-		sdf->ssd = FSL_QDMA_CMD_SS_ERR050757_LEN;
-	} else {
-		sdf->ssen = 0;
-		sdf->sss = 0;
-		sdf->ssd = 0;
+		if (len > FSL_QDMA_CMD_SS_ERR050757_LEN) {
+			sdf->ssen = 1;
+			sdf->sss = FSL_QDMA_CMD_SS_ERR050757_LEN;
+			sdf->ssd = FSL_QDMA_CMD_SS_ERR050757_LEN;
+		} else {
+			sdf->ssen = 0;
+			sdf->sss = 0;
+			sdf->ssd = 0;
+		}
 	}
 #endif
 	csgf_src = &ft->desc_sbuf;
@@ -837,19 +847,21 @@ fsl_qdma_enqueue_desc_sg(struct fsl_qdma_queue *fsl_queue)
 	csgf_src->length = total_len;
 	csgf_dest->length = total_len;
 #ifdef RTE_DMA_DPAA_ERRATA_ERR050757
-	sdf = &ft->df.sdf;
-	sdf->srttype = FSL_QDMA_CMD_RWTTYPE;
+	if (s_pci_read) {
+		sdf = &ft->df.sdf;
+		sdf->srttype = FSL_QDMA_CMD_RWTTYPE;
 #ifdef RTE_DMA_DPAA_ERRATA_ERR050265
-	sdf->prefetch = 1;
+		sdf->prefetch = 1;
 #endif
-	if (total_len > FSL_QDMA_CMD_SS_ERR050757_LEN) {
-		sdf->ssen = 1;
-		sdf->sss = FSL_QDMA_CMD_SS_ERR050757_LEN;
-		sdf->ssd = FSL_QDMA_CMD_SS_ERR050757_LEN;
-	} else {
-		sdf->ssen = 0;
-		sdf->sss = 0;
-		sdf->ssd = 0;
+		if (total_len > FSL_QDMA_CMD_SS_ERR050757_LEN) {
+			sdf->ssen = 1;
+			sdf->sss = FSL_QDMA_CMD_SS_ERR050757_LEN;
+			sdf->ssd = FSL_QDMA_CMD_SS_ERR050757_LEN;
+		} else {
+			sdf->ssen = 0;
+			sdf->sss = 0;
+			sdf->ssd = 0;
+		}
 	}
 #endif
 	ret = fsl_qdma_enqueue_desc_to_ring(fsl_queue, num);
@@ -888,6 +900,25 @@ fsl_qdma_enqueue_desc(struct fsl_qdma_queue *fsl_queue)
 			fsl_queue->pending_num = 0;
 		}
 		return ret;
+	} else if (!s_sg_enable) {
+		while (fsl_queue->pending_num > 0) {
+			ret = fsl_qdma_enqueue_desc_single(fsl_queue,
+				fsl_queue->pending_desc[start].dst,
+				fsl_queue->pending_desc[start].src,
+				fsl_queue->pending_desc[start].len);
+			if (!ret) {
+				start = (start + 1) &
+					(fsl_queue->pending_max - 1);
+				fsl_queue->pending_start = start;
+				fsl_queue->pending_num--;
+			} else {
+				DPAA_QDMA_ERR("Eq pending desc failed(%d)",
+					ret);
+				return -EIO;
+			}
+		}
+
+		return 0;
 	}
 
 	return fsl_qdma_enqueue_desc_sg(fsl_queue);
-- 
2.25.1
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.