Re: [PATCH v2 0/5] fbdev: tdfxfb: Make "unbooted" cards work
Helge Deller <[email protected]>
| Newsgroups | org.freedesktop.lists.dri-devel,org.kernel.vger.linux-fbdev,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
On 7/31/26 14:19, Daniel Palmer wrote: > Currently voodoo cards that weren't booted by the video BIOS aren't > usable because the hardware is never brought up. > > This means if you happen to have a proper - non-x86 - computer, > another card is the primary or you have a new BIOS that cannot > run the video BIOS tdfxfb would probe but you will be staring at > "no signal detected". > > This series implements manually booting cards using the > values from the video BIOS' own table. Currently this only works > for the voodoo 3. > > Debugging was partially assisted by Claude Fable 5. I could not > work out why this would not work for months so I told it to > create a voodoo 3 emulation for QEMU to compare the BIOS against > my code. That made it obvious my init sequence matched the BIOS > but the VGA core wasn't running. > > This has been tested on a real voodoo 3 in an x86-64 board and > an Amiga 4000 with a mediator PCI bridge. > > I have some patches to add an interface for doing 3D rendering > that are not included in this series and 3D rendering is also > working so as far as I can tell everything is good. > > v2: > - Fix up some poor 3am English mistakes in the cover letter. > - Limit this to the voodoo 3. The BIOS layout is different > for the 4/5 apparently. > - Fixed the valid sashiko complaints - mainly clearing the > framebuffer memory before fbcon might have bound, retaining > the current behaviour if we can't get the video BIOS to get > the config parameters. > - Tweaked the wording of some of the commit messages. > > Daniel Palmer (5): > fbdev: tdfxfb: Add helper to read config table from BIOS > fbdev: tdfxfb: Attempt to detect if the card wasn't booted > fbdev: tdfxfb: Manually boot unbooted cards > fbdev: tdfxfb: Wake the VGA core before programming the CRTC > fbdev: tdfxfb: Program the initial video mode > > drivers/video/fbdev/tdfxfb.c | 155 +++++++++++++++++++++++++++++++++++ > 1 file changed, 155 insertions(+) New series applied to fbdev. Thanks! Helge