[PATCH v9 1/5] rust: error: add remaining error codes

From: Timur Tabi <[email protected]>

Add all of the remaining error codes from include/uapi/asm-generic/errno.h.

Previous updates to error.rs have been piecemeal -- adding single error
codes as needed.  Instead, we can avoid future problems by adding all
the remaining error code in one swoop.

EDEADLOCK and EWOULDBLOCK are intentionally left out: they are just
deprecated compatibility aliases of EDEADLK and EAGAIN, kept around for
non-Linux/POSIX code, and have no use in new kernel code.

Signed-off-by: Timur Tabi <[email protected]>
Reviewed-by: Fiona Behrens <[email protected]>
Acked-by: Danilo Krummrich <[email protected]>
Reviewed-by: Gary Guo <[email protected]>
Reviewed-by: Alexandre Courbot <[email protected]>
---
 rust/kernel/error.rs | 105 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 105 insertions(+)

diff --git a/rust/kernel/error.rs b/rust/kernel/error.rs
index a56ba6309594..f3096d7c73ac 100644
--- a/rust/kernel/error.rs
+++ b/rust/kernel/error.rs
@@ -30,6 +30,8 @@ macro_rules! declare_err {
         };
     }
 
+    // From include/uapi/asm-generic/errno-base.h
+
     declare_err!(EPERM, "Operation not permitted.");
     declare_err!(ENOENT, "No such file or directory.");
     declare_err!(ESRCH, "No such process.");
@@ -64,9 +66,112 @@ macro_rules! declare_err {
     declare_err!(EPIPE, "Broken pipe.");
     declare_err!(EDOM, "Math argument out of domain of func.");
     declare_err!(ERANGE, "Math result not representable.");
+
+    // From include/uapi/asm-generic/errno.h
+
+    declare_err!(EDEADLK, "Resource deadlock would occur.");
+    declare_err!(ENAMETOOLONG, "File name too long.");
+    declare_err!(ENOLCK, "No record locks available.");
+    declare_err!(ENOSYS, "Invalid system call number.");
+    declare_err!(ENOTEMPTY, "Directory not empty.");
+    declare_err!(ELOOP, "Too many symbolic links encountered.");
+    declare_err!(ENOMSG, "No message of desired type.");
+    declare_err!(EIDRM, "Identifier removed.");
+    declare_err!(ECHRNG, "Channel number out of range.");
+    declare_err!(EL2NSYNC, "Level 2 not synchronized.");
+    declare_err!(EL3HLT, "Level 3 halted.");
+    declare_err!(EL3RST, "Level 3 reset.");
+    declare_err!(ELNRNG, "Link number out of range.");
+    declare_err!(EUNATCH, "Protocol driver not attached.");
+    declare_err!(ENOCSI, "No CSI structure available.");
+    declare_err!(EL2HLT, "Level 2 halted.");
+    declare_err!(EBADE, "Invalid exchange.");
+    declare_err!(EBADR, "Invalid request descriptor.");
+    declare_err!(EXFULL, "Exchange full.");
+    declare_err!(ENOANO, "No anode.");
+    declare_err!(EBADRQC, "Invalid request code.");
+    declare_err!(EBADSLT, "Invalid slot.");
+    declare_err!(EBFONT, "Bad font file format.");
+    declare_err!(ENOSTR, "Device not a stream.");
+    declare_err!(ENODATA, "No data available.");
+    declare_err!(ETIME, "Timer expired.");
+    declare_err!(ENOSR, "Out of streams resources.");
+    declare_err!(ENONET, "Machine is not on the network.");
+    declare_err!(ENOPKG, "Package not installed.");
+    declare_err!(EREMOTE, "Object is remote.");
+    declare_err!(ENOLINK, "Link has been severed.");
+    declare_err!(EADV, "Advertise error.");
+    declare_err!(ESRMNT, "Srmount error.");
+    declare_err!(ECOMM, "Communication error on send.");
+    declare_err!(EPROTO, "Protocol error.");
+    declare_err!(EMULTIHOP, "Multihop attempted.");
+    declare_err!(EDOTDOT, "RFS specific error.");
+    declare_err!(EBADMSG, "Not a data message.");
+    declare_err!(EFSBADCRC, "Bad CRC detected.");
     declare_err!(EOVERFLOW, "Value too large for defined data type.");
+    declare_err!(ENOTUNIQ, "Name not unique on network.");
+    declare_err!(EBADFD, "File descriptor in bad state.");
+    declare_err!(EREMCHG, "Remote address changed.");
+    declare_err!(ELIBACC, "Can not access a needed shared library.");
+    declare_err!(ELIBBAD, "Accessing a corrupted shared library.");
+    declare_err!(ELIBSCN, ".lib section in a.out corrupted.");
+    declare_err!(ELIBMAX, "Attempting to link in too many shared libraries.");
+    declare_err!(ELIBEXEC, "Cannot exec a shared library directly.");
+    declare_err!(EILSEQ, "Illegal byte sequence.");
+    declare_err!(ERESTART, "Interrupted system call should be restarted.");
+    declare_err!(ESTRPIPE, "Streams pipe error.");
+    declare_err!(EUSERS, "Too many users.");
+    declare_err!(ENOTSOCK, "Socket operation on non-socket.");
+    declare_err!(EDESTADDRREQ, "Destination address required.");
     declare_err!(EMSGSIZE, "Message too long.");
+    declare_err!(EPROTOTYPE, "Protocol wrong type for socket.");
+    declare_err!(ENOPROTOOPT, "Protocol not available.");
+    declare_err!(EPROTONOSUPPORT, "Protocol not supported.");
+    declare_err!(ESOCKTNOSUPPORT, "Socket type not supported.");
+    declare_err!(EOPNOTSUPP, "Operation not supported on transport endpoint.");
+    declare_err!(EPFNOSUPPORT, "Protocol family not supported.");
+    declare_err!(EAFNOSUPPORT, "Address family not supported by protocol.");
+    declare_err!(EADDRINUSE, "Address already in use.");
+    declare_err!(EADDRNOTAVAIL, "Cannot assign requested address.");
+    declare_err!(ENETDOWN, "Network is down.");
+    declare_err!(ENETUNREACH, "Network is unreachable.");
+    declare_err!(ENETRESET, "Network dropped connection because of reset.");
+    declare_err!(ECONNABORTED, "Software caused connection abort.");
+    declare_err!(ECONNRESET, "Connection reset by peer.");
+    declare_err!(ENOBUFS, "No buffer space available.");
+    declare_err!(EISCONN, "Transport endpoint is already connected.");
+    declare_err!(ENOTCONN, "Transport endpoint is not connected.");
+    declare_err!(ESHUTDOWN, "Cannot send after transport endpoint shutdown.");
+    declare_err!(ETOOMANYREFS, "Too many references: cannot splice.");
     declare_err!(ETIMEDOUT, "Connection timed out.");
+    declare_err!(ECONNREFUSED, "Connection refused.");
+    declare_err!(EHOSTDOWN, "Host is down.");
+    declare_err!(EHOSTUNREACH, "No route to host.");
+    declare_err!(EALREADY, "Operation already in progress.");
+    declare_err!(EINPROGRESS, "Operation now in progress.");
+    declare_err!(ESTALE, "Stale file handle.");
+    declare_err!(EUCLEAN, "Structure needs cleaning.");
+    declare_err!(EFSCORRUPTED, "Filesystem is corrupted.");
+    declare_err!(ENOTNAM, "Not a XENIX named type file.");
+    declare_err!(ENAVAIL, "No XENIX semaphores available.");
+    declare_err!(EISNAM, "Is a named type file.");
+    declare_err!(EREMOTEIO, "Remote I/O error.");
+    declare_err!(EDQUOT, "Quota exceeded.");
+    declare_err!(ENOMEDIUM, "No medium found.");
+    declare_err!(EMEDIUMTYPE, "Wrong medium type.");
+    declare_err!(ECANCELED, "Operation Canceled.");
+    declare_err!(ENOKEY, "Required key not available.");
+    declare_err!(EKEYEXPIRED, "Key has expired.");
+    declare_err!(EKEYREVOKED, "Key has been revoked.");
+    declare_err!(EKEYREJECTED, "Key was rejected by service.");
+    declare_err!(EOWNERDEAD, "Owner died.");
+    declare_err!(ENOTRECOVERABLE, "State not recoverable.");
+    declare_err!(ERFKILL, "Operation not possible due to RF-kill.");
+    declare_err!(EHWPOISON, "Memory page has hardware error.");
+    declare_err!(EFTYPE, "Wrong file type for the intended operation.");
+
+    // From include/linux/errno.h
+
     declare_err!(ERESTARTSYS, "Restart the system call.");
     declare_err!(ERESTARTNOINTR, "System call was interrupted by a signal and will be restarted.");
     declare_err!(ERESTARTNOHAND, "Restart if no handler.");
-- 
2.55.0