[PATCH v4 1/6] dt-bindings: display: Add Solomon SSD1351 OLED controller

Add a device tree binding for the Solomon SSD1351, a 128x128 65k-color
RGB OLED display controller driven over a 4-wire SPI bus. The binding
builds on the shared solomon,ssd-common.yaml properties already used by
the other Solomon display controllers.

Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Amit Barzilai <[email protected]>
Reviewed-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
---
 .../bindings/display/solomon,ssd1351.yaml     | 42 +++++++++++++++++++
 1 file changed, 42 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/solomon,ssd1351.yaml

diff --git a/Documentation/devicetree/bindings/display/solomon,ssd1351.yaml b/Documentation/devicetree/bindings/display/solomon,ssd1351.yaml
new file mode 100644
index 000000000000..80850c2ab5b3
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/solomon,ssd1351.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/solomon,ssd1351.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Solomon SSD1351 OLED Display Controller
+
+maintainers:
+  - Amit Barzilai <[email protected]>
+  - Javier Martinez Canillas <[email protected]>
+
+allOf:
+  - $ref: solomon,ssd-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - solomon,ssd1351
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        oled@0 {
+            compatible = "solomon,ssd1351";
+            reg = <0x0>;
+            reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+            dc-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+            spi-max-frequency = <10000000>;
+        };
+    };
-- 
2.55.0