Re: [PATCH v3] drm/i915/dmabuf: avoid global wbinvd on dma-buf import

On 20/08/2026 21:50, Prabhakaran, Krishna wrote:
> From: Krishna Prabhakaran <[email protected]>
> 
> When i915 needs to make an imported dma-buf coherent for GPU access on
> non-LLC platforms, or for objects that bypass LLC, it currently calls
> wbinvd_on_all_cpus(). get_pages() runs whenever an imported buffer is
> pinned, so this triggers a whole-cache write-back and invalidate,
> broadcast by IPI to every CPU, on every execbuf submission involving an
> imported dma-buf. That stalls the entire machine for milliseconds and
> starves latency-sensitive work on unrelated cores (e.g. USB isochronous
> audio serviced on the VMM's main thread).
> 
> Flush only the pages that actually need it instead:
> 
>   - If we imported one of our own dma-bufs, the backing object is
>     struct-page backed once migrated to SMEM, so flush it directly with
>     drm_clflush_sg(), exactly as we flush our other objects. This also
>     avoids re-entering the exporter through dma_buf_vmap(), which would
>     recurse into i915_gem_object_pin_map() on the source object we
>     already hold locked (and fails the igt_dmabuf_import_same_driver
>     selftest with -EBUSY).
> 
>   - For a foreign dma-buf the sg_table is not guaranteed to be backed by
>     struct pages, and the importer has no way to tell, so drm_clflush_sg()
>     cannot be used. vmap the buffer and flush that virtual range with
>     drm_clflush_virt_range() instead: x86 uses PIPT caches, so flushing
>     one virtual alias evicts the cache lines for every alias of the same
>     physical pages. The dma_resv lock required by dma_buf_vmap() is
>     already held here via the imported object.
> 
> Fall back to wbinvd only when the buffer cannot be vmapped or is backed
> by I/O memory, where there is no CPU-side range to clflush.
> 
> Fixes: a035154da45d ("drm/i915/dmabuf: add paranoid flush-on-acquire")
> Signed-off-by: Krishna Prabhakaran <[email protected]>
> ---
> v3:
>   - Drop the wbinvd fallback in the own-dma-buf branch: the exporter is
>     migrated to SMEM on attach, so it is always struct-page backed here;
>     flushing device memory made no sense from i915's point of view
>     (Matthew Auld).
> 
> v2:
>   - Flush our own imported dma-bufs directly with drm_clflush_sg() instead of
>     dma_buf_vmap(), which re-entered i915_gem_object_pin_map() on the source
>     object and failed igt_dmabuf_import_same_driver_smem with -EBUSY (reported
>     by Intel CI on v1). Foreign dma-bufs still use dma_buf_vmap() +
>     drm_clflush_virt_range(); wbinvd only as fallback.
>   - Link to v1: https://patchwork.freedesktop.org/patch/744955/?series=171760
> 
>   drivers/gpu/drm/i915/gem/i915_gem_dmabuf.c | 52 ++++++++++++++++++----
>   1 file changed, 44 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/gem/i915_gem_dmabuf.c b/drivers/gpu/drm/i915/gem/i915_gem_dmabuf.c
> index b43d34c7d641..fbf0e0d4b026 100644
> --- a/drivers/gpu/drm/i915/gem/i915_gem_dmabuf.c
> +++ b/drivers/gpu/drm/i915/gem/i915_gem_dmabuf.c
> @@ -10,6 +10,8 @@
>   
>   #include <asm/smp.h>
>   
> +#include <drm/drm_cache.h>
> +
>   #include "gem/i915_gem_dmabuf.h"
>   #include "i915_drv.h"
>   #include "i915_gem_object.h"
> @@ -249,16 +251,50 @@ static int i915_gem_object_get_pages_dmabuf(struct drm_i915_gem_object *obj)
>   	 * DG1 is special here since it still snoops transactions even with
>   	 * CACHE_NONE. This is not the case with other HAS_SNOOP platforms. We
>   	 * might need to revisit this as we add new discrete platforms.
> -	 *
> -	 * XXX: Consider doing a vmap flush or something, where possible.
> -	 * Currently we just do a heavy handed wbinvd_on_all_cpus() here since
> -	 * the underlying sg_table might not even point to struct pages, so we
> -	 * can't just call drm_clflush_sg or similar, like we do elsewhere in
> -	 * the driver.
>   	 */
>   	if (i915_gem_object_can_bypass_llc(obj) ||
> -	    (!HAS_LLC(i915) && !IS_DG1(i915)))
> -		wbinvd_on_all_cpus();
> +	    (!HAS_LLC(i915) && !IS_DG1(i915))) {
> +		struct dma_buf *dma_buf = obj->base.import_attach->dmabuf;
> +
> +		if (dma_buf->ops == &i915_dmabuf_ops) {
> +			struct drm_i915_gem_object *dma_obj =
> +				dma_buf_to_obj(dma_buf);
> +
> +			/*
> +			 * We imported one of our own dma-bufs. The exporter is
> +			 * migrated to SMEM on attach, so it is struct-page
> +			 * backed and we can flush it directly, the same way we
> +			 * flush our other objects. This also avoids re-entering
> +			 * the exporter through dma_buf_vmap(), which would
> +			 * recurse into i915_gem_object_pin_map() on the source
> +			 * object we already hold locked.
> +			 */
> +			drm_clflush_sg(dma_obj->mm.pages);

I think we still need to wrap this with has_struct_page()?

> +		} else {
> +			struct iosys_map map;
> +
> +			/*
> +			 * A foreign sg_table is not guaranteed to be backed by
> +			 * struct pages, so we cannot use drm_clflush_sg(). vmap
> +			 * the buffer and flush the virtual range instead; x86
> +			 * uses PIPT caches, so flushing one alias evicts the
> +			 * lines for every alias of the same physical pages.
> +			 *
> +			 * We already hold the dma_resv lock via the imported
> +			 * obj, so use the locked dma_buf_vmap() variant.
> +			 */
> +			if (!dma_buf_vmap(dma_buf, &map)) {
> +				if (!map.is_iomem)
> +					drm_clflush_virt_range(map.vaddr,
> +							       obj->base.size);
> +				else
> +					wbinvd_on_all_cpus();
> +				dma_buf_vunmap(dma_buf, &map);
> +			} else {
> +				wbinvd_on_all_cpus();
> +			}
> +		}
> +	}
>   
>   	__i915_gem_object_set_pages(obj, sgt);
>   
> 
> base-commit: 682ea2d28d18bb06f9fc663cb5ab7e80dc0e606a