Re: [PATCH v4 0/2] drm/nouveau: NVAC (MCP79) stability: MSI rearm and a NULL crtc guard

First patch looks fine, I sent a new patch series to address the issue
pointed out by patch 2, as it was a bit of a bandaid around a larger
issue.

Will push the first patch in just a moment

On Sun, 2026-08-16 at 15:09 +0200, Marek Czernohous wrote:
> From: Marek Czernohous <[email protected]>
> 
> This is v4 of two NVAC (MCP79) stability fixes.  v3 went out on 11
> June
> and has had no replies:
> 
>  
> https://lore.kernel.org/all/[email protected]/
> 
> Nothing in either patch changed.  Same diffs, same reasoning, same
> trailers.  The reason this is a v4 and not a ping is that 2/2 no
> longer
> applies to mainline, so a ping would have pointed at a series nobody
> can
> test.
> 
> What moved was somebody else's context, not this code.
> Commit 5164f7e7ff8e ("drm: Rename struct drm_atomic_state to
> drm_atomic_commit") changed the callback signature, so
> nv50_sor_atomic_disable() now takes a struct drm_atomic_commit
> *state.
> 2/2 is rebased onto that by hand.  1/2 applies unchanged and is
> byte-identical to v3.
> 
> Both bugs are still live in c21bb4193868.  dispnv50/disp.c:1568 still
> does nv50_head(nv_encoder->crtc) with no NULL check, and there is no
> guard anywhere in the function.  Immediately below it, :1570 takes
> nv50_outp_get_old_connector() and :1572 dereferences the result
> without
> checking it.
> 
> 1/2 drm/nouveau/pci: use config-space MSI rearm on MCP79/MCP7A (NVAC)
> 
>     NVAC re-arms MSI through the MMIO mirror of PCI config space,
> which
>     is unreliable on this IGP.  A missed re-arm leaves the interrupt
>     line dead, submission times out and the GPU looks hung until
>     reboot.  Give NVAC its own pci func that re-arms through real
>     config space, the way commit 5112abc6a433 ("drm/nouveau/pci/g92:
>     Fix rearm") already did for g92.  Only NVAC is switched, because
>     that is the part this was validated on.
> 
> 2/2 drm/nouveau/kms: guard NULL crtc in nv50_sor_atomic_disable()
> 
>     Restore the NULL check that
>     commit f575f2bdb6c3 ("drm/nouveau/kms/nv50-: Remove
>     (nv_encoder->crtc) checks in ->disable callbacks") removed, as a
>     drm_WARN_ON_ONCE() rather than a silent return, since a NULL crtc
>     here is a state-tracking inconsistency worth seeing.  The guard
> is
>     hoisted above the backlight teardown so the old connector is only
>     used after it has been checked; without that the oops would just
>     move a few lines down.
> 
> Testing.  The MSI change continues to run here on the Mac mini as a
> daily driver, and Fab Stz confirmed it independently on an iMac9,1.
> Both Tested-by tags are carried over unchanged from v3; the
> diffs they were given are the diffs sent here, apart from the
> mechanical
> rebase of 2/2.  For v4 I rebuilt 2/2 with
> CONFIG_DRM_NOUVEAU_BACKLIGHT
> set to y and to n, because the patch splits the #ifdef block in two
> and
> that is where a change of this shape tends to break.
> 
> If something about the shape of the series is what is holding it up,
> I
> would rather hear that than keep rebasing it.
> 
> Marek Czernohous (2):
>   drm/nouveau/pci: use config-space MSI rearm on MCP79/MCP7A (NVAC)
>   drm/nouveau/kms: guard NULL crtc in nv50_sor_atomic_disable()
> 
>  drivers/gpu/drm/nouveau/dispnv50/disp.c       | 30 +++++++++++++---
>  .../gpu/drm/nouveau/include/nvkm/subdev/pci.h |  1 +
>  .../gpu/drm/nouveau/nvkm/engine/device/base.c |  2 +-
>  .../gpu/drm/nouveau/nvkm/subdev/pci/Kbuild    |  1 +
>  .../gpu/drm/nouveau/nvkm/subdev/pci/mcp79.c   | 35
> +++++++++++++++++++
>  5 files changed, 63 insertions(+), 6 deletions(-)
>  create mode 100644 drivers/gpu/drm/nouveau/nvkm/subdev/pci/mcp79.c
> 
> 
> base-commit: c21bb4193868a8de71fc4693fa741e195fdf5d86