ath10k-firmware: WCN3990 hw1.0: Qualcomm SM8150-HDK

Dmitry Baryshkov <[email protected]>
Newsgroups org.infradead.lists.ath10k
Message-ID <[email protected]> 
Hello,

This is the board file to be used with the Qualcomm / Lantronix SM8150
Hardware Development Kit. The DT with the specified calibration variant
is supported upstream.

* description for what hardware this is

 - development kit for Qualcomm SM8150 platforms.

* origin of the board file

 - extracted from the firmware partition on the device

* ids to be used with the board file

  - WCN3990 hw 1.0

    + bus=snoc,qmi-board-id=55,qmi-chip-id=30224,variant=Qualcomm_sm8150hdk
      md5sum 15afaa2f565c9b063012f7faba9ba745
      sha256sum f040cecefd723a4bd28015bb74e85723c971fdff36a773e9e83936dbab2ec61a

-- 
With best wishes
Dmitry
(unnamed) (application/octet-stream, 25.7 KB) - not displayed
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.