Re: [PATCH v2 5/6] arm64: dts: qcom: ipq5018: add nodes required for Bluetooth support

Konrad Dybcio <[email protected]> Tue, 30 Jun 2026 13:40:39 +0200

Newsgroups	org.infradead.lists.ath10k,org.kernel.vger.linux-arm-msm,org.kernel.vger.linux-block,org.kernel.vger.linux-bluetooth,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel,org.kernel.vger.linux-mmc,org.kernel.vger.linux-remoteproc,org.kernel.vger.linux-wireless,org.kernel.vger.netdev
Message-ID	<[email protected]>

On 6/29/26 3:01 PM, George Moussalem via B4 Relay wrote:
> From: George Moussalem <[email protected]>
> 
> Add nodes for the reserved memory carveout and Bluetooth.
> 
> Signed-off-by: George Moussalem <[email protected]>
> ---
>  arch/arm64/boot/dts/qcom/ipq5018.dtsi | 25 ++++++++++++++++++++++++-
>  1 file changed, 24 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> index 6f8004a22a1f..65a47ba7d3a3 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> @@ -17,6 +17,23 @@ / {
>  	#address-cells = <2>;
>  	#size-cells = <2>;
>  
> +	bluetooth: bluetooth {
> +		compatible = "qcom,ipq5018-bt";
> +
> +		firmware-name = "qca/bt_fw_patch.mbn";

Is this fw vendor-signed?

Konrad