Re: [PATCH] wifi: ath11k: fix warning when unbinding

On 4/20/2026 4:31 PM, Jose Ignacio Tornos Martinez wrote:
> If there is an error during some initialization related to firmware,
> the buffers dp->tx_ring[i].tx_status are released.
> However this is released again when the device is unbinded (ath11k_pci),
> and we get:
> WARNING: CPU: 0 PID: 6231 at mm/slub.c:4368 free_large_kmalloc+0x57/0x90
> Call Trace:
> free_large_kmalloc
> ath11k_dp_free
> ath11k_core_deinit
> ath11k_pci_remove
> ...
> 
> The issue is always reproducible from a VM because the MSI addressing
> initialization is failing.
> 
> In order to fix the issue, just set the buffers to NULL after releasing in
> order to avoid the double free.
> 
> Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
> Cc: [email protected]
> Signed-off-by: Jose Ignacio Tornos Martinez <[email protected]>
> ---
>   drivers/net/wireless/ath/ath11k/dp.c | 1 +
>   1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/net/wireless/ath/ath11k/dp.c b/drivers/net/wireless/ath/ath11k/dp.c
> index bbb86f165141..5a50b623bd07 100644
> --- a/drivers/net/wireless/ath/ath11k/dp.c
> +++ b/drivers/net/wireless/ath/ath11k/dp.c
> @@ -1040,6 +1040,7 @@ void ath11k_dp_free(struct ath11k_base *ab)
>   		idr_destroy(&dp->tx_ring[i].txbuf_idr);
>   		spin_unlock_bh(&dp->tx_ring[i].tx_idr_lock);
>   		kfree(dp->tx_ring[i].tx_status);
> +		dp->tx_ring[i].tx_status = NULL;
>   	}
>   
>   	/* Deinit any SOC level resource */

On which hardware did you observe this issue? is it QCA6390, WCN6855, 
QCA2066 or QCA6698AQ ? Also, where do you see the initial failure ? Is 
it somewhere in ath11k_core_qmi_firmware_ready() ?

I am asking because this looks like it may be exposed by commit 
6fe62a8cec51 ("wifi: ath11k: Add cold boot calibration support on 
WCN6750") [1]. That commit added the ATH11K_QMI_EVENT_FW_READY path, but 
the return value from ath11k_core_qmi_firmware_ready() is not handled 
there. If that call fails after ath11k_dp_free() has already run on the 
error path, ATH11K_FLAG_QMI_FAIL is not set. Later, ath11k_pci_remove() 
does not take the QMI-fail cleanup path and calls ath11k_core_deinit(), 
which calls ath11k_dp_free() and other cleanup functions again.

This is similar to the failure case fixed earlier by a19c0e104db9
("ath11k: Handle failure in qmi firmware ready") [2], where failure from
ath11k_core_qmi_firmware_ready() needed to be handled.


[1] 
https://lore.kernel.org/r/[email protected]
[2] 
https://lore.kernel.org/r/[email protected]



--
Ramesh