Re: [PATCH ath-current v2] wifi: ath11k: reset ar->num_station on hardware start

On 7/30/2026 7:03 AM, Nicolas Escande wrote:
> When (multiple) hw restart occurs, we end up in a situation where we
> cannot accept new stations / mesh peers. This seems to be the
> 'num_stations' in 'struct ath11k' that did not get reset properly in
> this case. In ath11k_mac_op_start(), it was indeed the only accounting var
> that did not get reset so let's clear it too.
> 
> This avaoids problems like those:
> 
> 	[1248828.088023] WARNING: CPU: 0 PID: 12281 at net/mac80211/util.c:1682 ieee80211_reconfig_stations+0x98/0xc0
> 	[1248828.088029] Modules linked in: ath11k_pci XXX [last unloaded: ath11k_pci]
> 	[1248828.088053] CPU: 0 UID: 0 PID: 12281 Comm: kworker/0:0 Tainted: G        W          XXX
> 	[1248828.088058] Tainted: [W]=WARN
> 	[1248828.088059] Hardware name: XXX (DT)
> 	[1248828.088060] Workqueue: events_freezable ieee80211_restart_work
> 	[1248828.088064] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> 	[1248828.088068] pc : ieee80211_reconfig_stations+0x98/0xc0
> 	[1248828.088070] lr : ieee80211_reconfig_stations+0x94/0xc0
> 	[1248828.088073] sp : ffffff800025bc10
> 	[1248828.088074] x29: ffffff800025bc10 x28: 0000000000000001 x27: ffffff8027b19640
> 	[1248828.088078] x26: ffffff802a5619c8 x25: ffffff8027b199f0 x24: ffffff8027b19880
> 	[1248828.088082] x23: ffffff802a560e40 x22: ffffff8027b18880 x21: ffffff802a560800
> 	[1248828.088087] x20: 0000000000000001 x19: ffffff8027c71000 x18: ffffffffffffffff
> 	[1248828.088091] x17: 128c0801a9c37469 x16: 766e692d32464545 x15: ffffffffffffffff
> 	[1248828.088095] x14: 000000000000001f x13: 00000000000000b1 x12: 0000000000000001
> 	[1248828.088099] x11: ffffffc081061518 x10: ffffff800025baf0 x9 : ffffffc0808097f8
> 	[1248828.088103] x8 : 00000000ffffffd0 x7 : 0000000000000000 x6 : 000000000000003f
> 	[1248828.088107] x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffffff8011ef2e80
> 	[1248828.088110] x2 : 0000000000000000 x1 : ffffff8011ef2e80 x0 : 00000000ffffff97
> 	[1248828.088115] Call trace:
> 	[1248828.088116]  ieee80211_reconfig_stations+0x98/0xc0 (P)
> 	[1248828.088119]  ieee80211_reconfig+0x774/0x1438
> 	[1248828.088123]  ieee80211_restart_work+0x10c/0x178
> 	[1248828.088127]  process_one_work+0x178/0x3c0
> 	[1248828.088130]  worker_thread+0x280/0x440
> 	[1248828.088133]  kthread+0xe0/0xf8
> 	[1248828.088137]  ret_from_fork+0x10/0x20
> 	[1248828.088141] ---[ end trace 0000000000000000 ]---
> 	[1248828.090658] mesh1: HW problem - can not stop rx aggregation for 72:fc:8f:a8:f1:ed tid 0
> 	[1248828.090667] mesh1: HW problem - can not stop rx aggregation for 72:fc:8f:a8:f1:ed tid 3
> 	[1248828.090670] mesh1: HW problem - can not stop rx aggregation for 72:fc:8f:a8:f1:ed tid 4
> 	[1248828.090689] wlan2: HW problem - can not stop rx aggregation for 78:64:c0:26:8e:69 tid 0
> 	[1248828.090694] wlan2: HW problem - can not stop rx aggregation for 78:64:c0:26:8e:69 tid 1
> 	[1248828.090697] wlan2: HW problem - can not stop rx aggregation for 78:64:c0:26:8e:69 tid 5
> 	[1248828.090700] wlan2: HW problem - can not stop rx aggregation for 78:64:c0:26:8e:69 tid 6
> 	[1248828.090704] wlan2: HW problem - can not stop rx aggregation for be:3b:3d:84:3a:00 tid 0
> 	[1248828.090707] wlan2: HW problem - can not stop rx aggregation for be:3b:3d:84:3a:00 tid 1
> 	[1248828.090710] wlan2: HW problem - can not stop rx aggregation for be:3b:3d:84:3a:00 tid 6
> 	[1248836.686596] ath11k_warn: 39 callbacks suppressed
> 	[1248836.686604] ath11k_pci 0000:04:00.0: refusing to associate station: too many connected already (128)
> 	[1248836.686609] ath11k_pci 0000:04:00.0: Failed to add station: e8:51:9e:d6:93:22 for VDEV: 1
> 	[1248941.120126] ath11k_pci 0000:04:00.0: failed to flush sta transmit queue, data pkts pending 2
> 	[1248941.120186] ath11k_pci 0000:04:00.0: failed to clear all peer keys for vdev 2: -2
> 	[1248941.120190] ath11k_pci 0000:04:00.0: Failed to disassociate station: 92:14:23:65:57:fc
> 	[1248941.120196] ath11k_pci 0000:04:00.0: failed to lookup peer 92:14:23:65:57:fc on vdev 2
> 	[1248941.120200] ath11k_pci 0000:04:00.0: failed to find peer vdev_id 2 addr 92:14:23:65:57:fc in delete
> 	[1248941.120204] ath11k_pci 0000:04:00.0: Failed to delete peer: 92:14:23:65:57:fc for VDEV: 2
> 	[1248941.120207] ath11k_pci 0000:04:00.0: Failed to remove station: 92:14:23:65:57:fc for VDEV: 2
> 	[1248941.121319] ath11k_pci 0000:04:00.0: refusing to associate station: too many connected already (128)
> 	[1248941.121326] ath11k_pci 0000:04:00.0: Failed to add station: 92:14:23:65:57:fc for VDEV: 2
> 	[1248941.123036] ath11k_pci 0000:04:00.0: refusing to associate station: too many connected already (128)

In addition to Baochen's comments please review the guidelines on trimming
backtraces at:

https://www.kernel.org/doc/html/latest/process/submitting-patches.html#backtraces-in-commit-messages