Re: [PATCH] wifi: ath11k: fix rssi station dump for IPQ5018 and QCN6122

Hi all,

On 11/25/25 18:28, Christian Marangi wrote:
> Commit 031ffa6c2cd3 ("wifi: ath11k: fix rssi station dump not updated in
> QCN9074") didn't account for IPQ5018 and QCN6122 WiFi card that are
> based on QCN9074.
> 
> Update the .mpdu_info_get_peerid to use the QCN9074 variant to correctly
> receive consistent RSSI station data.

Is there anything preventing this fix to be reviewed/merged?
I've also tested this and can confirm it's working flawlessly, so:

Tested-by: George Moussalem <[email protected]>

> 
> Reported-by: Scott Mercer <[email protected]>
> Suggested-by: Scott Mercer <[email protected]>
> Tested-by: Scott Mercer <[email protected]>
> Fixes: 031ffa6c2cd3 ("wifi: ath11k: fix rssi station dump not updated in QCN9074")
> Signed-off-by: Christian Marangi <[email protected]>
> ---
>  drivers/net/wireless/ath/ath11k/hw.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/net/wireless/ath/ath11k/hw.c b/drivers/net/wireless/ath/ath11k/hw.c
> index caa6dc12a790..05d7acbbab56 100644
> --- a/drivers/net/wireless/ath/ath11k/hw.c
> +++ b/drivers/net/wireless/ath/ath11k/hw.c
> @@ -1175,7 +1175,7 @@ const struct ath11k_hw_ops ipq5018_ops = {
>  	.rx_desc_get_attention = ath11k_hw_qcn9074_rx_desc_get_attention,
>  	.reo_setup = ath11k_hw_ipq5018_reo_setup,
>  	.rx_desc_get_msdu_payload = ath11k_hw_qcn9074_rx_desc_get_msdu_payload,
> -	.mpdu_info_get_peerid = ath11k_hw_ipq8074_mpdu_info_get_peerid,
> +	.mpdu_info_get_peerid = ath11k_hw_qcn9074_mpdu_info_get_peerid,
>  	.rx_desc_mac_addr2_valid = ath11k_hw_ipq9074_rx_desc_mac_addr2_valid,
>  	.rx_desc_mpdu_start_addr2 = ath11k_hw_ipq9074_rx_desc_mpdu_start_addr2,
>  	.get_ring_selector = ath11k_hw_ipq8074_get_tcl_ring_selector,


Best regards,
George