[PATCH 1/6] dt: bindings: net: add bindings for QCN6122
George Moussalem via B4 Relay <[email protected]>
| Newsgroups | org.infradead.lists.ath11k,org.kernel.feeds.b4-sent,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel,org.kernel.vger.linux-wireless |
|---|---|
| Message-ID | <[email protected]> |
From: George Moussalem <[email protected]> QCN6122 is a PCIe based solution that is attached to and enumerated by the WPSS (Wireless Processor SubSystem) Q6 processor. Though it is a PCIe device, since it is not attached to APSS processor (Application Processor SubSystem), APSS will be unaware of such a decice so it is registered to the APSS processor as a platform device(AHB). Because of this hybrid nature, it is called as a hybrid bus device as introduced by WCN6750. It has 5 CE and 8 DP rings. QCN6122 is similar to WCN6750 and follows the same codepath as for WCN6750. Signed-off-by: George Moussalem <[email protected]> --- .../bindings/net/wireless/qcom,ath11k.yaml | 57 +++++++++++++++++++++- 1 file changed, 56 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml index c089677702cf17f3016b054d21494d2a7706ce5d..4b0b282bb9231c8bc496fed42e0917b9d7d106d2 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml @@ -21,12 +21,13 @@ properties: - qcom,ipq6018-wifi - qcom,wcn6750-wifi - qcom,ipq5018-wifi + - qcom,qcn6122-wifi reg: maxItems: 1 interrupts: - minItems: 32 + minItems: 13 maxItems: 52 interrupt-names: @@ -87,6 +88,14 @@ properties: items: - const: wlan-smp2p-out + qcom,userpd: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [2, 3] + description: instance ID of user PD (protection domain) in multi-PD + architectures to distinguish between multiple instances + of the same wifi chip used by QMI in its interface with + the firmware running on Q6. + required: - compatible - reg @@ -268,6 +277,31 @@ allOf: - description: interrupt event for ring DP20 - description: interrupt event for ring DP21 - description: interrupt event for ring DP22 + - if: + properties: + compatible: + contains: + enum: + - qcom,qcn6122-wifi + then: + required: + - qcom,userpd + properties: + interrupts: + items: + - description: interrupt event for ring CE1 + - description: interrupt event for ring CE2 + - description: interrupt event for ring CE3 + - description: interrupt event for ring CE4 + - description: interrupt event for ring CE5 + - description: interrupt event for ring DP1 + - description: interrupt event for ring DP2 + - description: interrupt event for ring DP3 + - description: interrupt event for ring DP4 + - description: interrupt event for ring DP5 + - description: interrupt event for ring DP6 + - description: interrupt event for ring DP7 + - description: interrupt event for ring DP8 examples: - | @@ -467,3 +501,24 @@ examples: iommus = <&apps_smmu 0x1c02 0x1>; }; }; + + - | + wifi1: wifi@b00a040 { + reg = <0x0b00a040 0x0>; + compatible = "qcom,qcn6122-wifi"; + interrupts = <GIC_SPI 416 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 417 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 418 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 419 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 420 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 421 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 422 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 423 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 424 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 425 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 426 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 427 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 428 IRQ_TYPE_EDGE_RISING>; + qcom,rproc = <&q6v5_wcss_pd2>; + qcom,userpd = <2>; + }; -- 2.51.1