Re: [PATCH ath-next v4 0/6] wifi: ath11k: Add single shot/periodic CFR capture support

On 12/23/2025 5:27 PM, Qian Zhang wrote:
> To enable/disable cfr feature use command,
> 
> echo <val> > /sys/kernel/debug/ieee80211/phyX/ath11k/enable_cfr
> 
> where, val: 0 to disable CFR and 1 to enable CFR.
> 
> To enable CFR capture for associated peers,
> 
> echo "<val> <bw> <periodicity> <method>"
>  >
> /sys/kernel/debug/ieee80211/phyX/netdev\:wlanx/stations/<mac>/cfr_capture
> 
> val: 0 - stop CFR capture
>      1 - start CFR capture
> bw: CFR capture bandwidth
>      0 - 20MHZ
>      1 - 40MHZ
>      2 - 80MHZ
> Periodicity: Periodicity at which hardware is expceted to collect CFR
> dump.
>      0 - single shot capture.
>      non zero - for Periodic captures (value should be multiple of 10
> ms)
> method: Method used by hardware to collect the CFR dump.
>      0 - from the ACKs of QOS NULL packets.
> 
> To enable CFR capture for unassociated clients,
> 
> echo "<mac address> <val> <periodicity>"
>  > /sys/kernel/debug/ieee80211/phyX/ath11k/cfr_unassoc
> 
> Mac address: mac address of the client.
> Val: 0 - start CFR capture
>      1 - stop CFR capture
> Periodicity: Periodicity at which hardware is expceted to collect CFR
> dump.
>      0 - single shot capture.
>      non zero - for Periodic captures (value should be multiple of 10
> ms)
> 
> To collect the cfr dump,
> cat /sys/kernel/debug/ieee80211/phy0/ath11k/cfr_capture0 > /tmp/cfr.bin
> 
> Previous link:
> https://lore.kernel.org/all/[email protected]/
> 
> Signed-off-by: Yu Zhang(Yuriy) <[email protected]>
> Signed-off-by: Qian Zhang <[email protected]>
> 
> ---
> Changes in v4:
>  - Update patch 2/6

Details of changes is needed! General description like 'update' here does not help
understand the diff compared with your last revision.

> Changes in v3:
>  - Update related comments.
> Changes in v2:
>  - Update related comments.
> ---
> 
> Venkateswara Naralasetty (6):

The author in each individual patch is 'Qian Zhang <[email protected]>', please
check them.

>   wifi: ath11k: Add initialization and deinitialization sequence for CFR
>     module
>   wifi: ath11k: Register debugfs for CFR configuration
>   wifi: ath11k: Add support unassociated client CFR
>   wifi: ath11k: Register relayfs entries for CFR dump
>   wifi: ath11k: Register DBR event handler for CFR data
>   wifi: ath11k: Register handler for CFR capture event
> 
>  drivers/net/wireless/ath/ath11k/Kconfig       |   11 +
>  drivers/net/wireless/ath/ath11k/Makefile      |    1 +
>  drivers/net/wireless/ath/ath11k/cfr.c         | 1007 +++++++++++++++++
>  drivers/net/wireless/ath/ath11k/cfr.h         |  302 +++++
>  drivers/net/wireless/ath/ath11k/core.c        |   41 +-
>  drivers/net/wireless/ath/ath11k/core.h        |   19 +-
>  drivers/net/wireless/ath/ath11k/dbring.c      |   50 +-
>  drivers/net/wireless/ath/ath11k/dbring.h      |    8 +-
>  drivers/net/wireless/ath/ath11k/debug.h       |    8 +-
>  drivers/net/wireless/ath/ath11k/debugfs_sta.c |  142 ++-
>  drivers/net/wireless/ath/ath11k/hal.c         |    3 +-
>  drivers/net/wireless/ath/ath11k/hw.h          |    5 +-
>  drivers/net/wireless/ath/ath11k/mac.c         |   17 +-
>  drivers/net/wireless/ath/ath11k/wmi.c         |  147 ++-
>  drivers/net/wireless/ath/ath11k/wmi.h         |   97 +-
>  15 files changed, 1832 insertions(+), 26 deletions(-)
>  create mode 100644 drivers/net/wireless/ath/ath11k/cfr.c
>  create mode 100644 drivers/net/wireless/ath/ath11k/cfr.h
> 
> 
> base-commit: 25f833fff81de4fbb9b5382806860b63768567e8