[PATCH ath-next v5 0/6] wifi: ath11k: Add single shot/periodic CFR capture support

Qian Zhang <[email protected]>
Newsgroups org.infradead.lists.ath11k,org.kernel.vger.linux-wireless
Message-ID <[email protected]>
To enable/disable cfr feature use command,

echo <val> > /sys/kernel/debug/ieee80211/phyX/ath11k/enable_cfr

where, val: 0 to disable CFR and 1 to enable CFR.

To enable CFR capture for associated peers,

echo "<val> <bw> <periodicity> <method>"
 >
/sys/kernel/debug/ieee80211/phyX/netdev\:wlanx/stations/<mac>/cfr_capture

val: 0 - stop CFR capture
     1 - start CFR capture
bw: CFR capture bandwidth
     0 - 20MHZ
     1 - 40MHZ
     2 - 80MHZ
Periodicity: Periodicity at which hardware is expceted to collect CFR
dump.
     0 - single shot capture.
     non zero - for Periodic captures (value should be multiple of 10
ms)
method: Method used by hardware to collect the CFR dump.
     0 - from the ACKs of QOS NULL packets.

To enable CFR capture for unassociated clients,

echo "<mac address> <val> <periodicity>"
 > /sys/kernel/debug/ieee80211/phyX/ath11k/cfr_unassoc

Mac address: mac address of the client.
Val: 0 - start CFR capture
     1 - stop CFR capture
Periodicity: Periodicity at which hardware is expceted to collect CFR
dump.
     0 - single shot capture.
     non zero - for Periodic captures (value should be multiple of 10
ms)

To collect the cfr dump,
cat /sys/kernel/debug/ieee80211/phy0/ath11k/cfr_capture0 > /tmp/cfr.bin

Previous link:
https://lore.kernel.org/all/[email protected]/

Signed-off-by: Yu Zhang(Yuriy) <[email protected]>
Signed-off-by: Qian Zhang <[email protected]>

---
Changes in v5:
 - Restore the author in all patch commit messages.
 - Update patch 6/6. Cache the phymode during association and
   use it to replace phymode reported by the firmware.
Changes in v4:
 - Update patch 2/6. Remove redundant bw parameter check in
   ath11k_dbg_sta_write_cfr_capture()
Changes in v3:
 - Update related comments.
Changes in v2:
 - Update related comments.
---

Venkateswara Naralasetty (6):
  wifi: ath11k: Add initialization and deinitialization sequence for CFR
    module
  wifi: ath11k: Register debugfs for CFR configuration
  wifi: ath11k: Add support unassociated client CFR
  wifi: ath11k: Register relayfs entries for CFR dump
  wifi: ath11k: Register DBR event handler for CFR data
  wifi: ath11k: Register handler for CFR capture event

 drivers/net/wireless/ath/ath11k/Kconfig       |   11 +
 drivers/net/wireless/ath/ath11k/Makefile      |    1 +
 drivers/net/wireless/ath/ath11k/cfr.c         | 1022 +++++++++++++++++
 drivers/net/wireless/ath/ath11k/cfr.h         |  308 +++++
 drivers/net/wireless/ath/ath11k/core.c        |   41 +-
 drivers/net/wireless/ath/ath11k/core.h        |   19 +-
 drivers/net/wireless/ath/ath11k/dbring.c      |   50 +-
 drivers/net/wireless/ath/ath11k/dbring.h      |    8 +-
 drivers/net/wireless/ath/ath11k/debug.h       |    8 +-
 drivers/net/wireless/ath/ath11k/debugfs_sta.c |  142 ++-
 drivers/net/wireless/ath/ath11k/hal.c         |    3 +-
 drivers/net/wireless/ath/ath11k/hw.h          |    5 +-
 drivers/net/wireless/ath/ath11k/mac.c         |   19 +-
 drivers/net/wireless/ath/ath11k/wmi.c         |  147 ++-
 drivers/net/wireless/ath/ath11k/wmi.h         |   97 +-
 15 files changed, 1855 insertions(+), 26 deletions(-)
 create mode 100644 drivers/net/wireless/ath/ath11k/cfr.c
 create mode 100644 drivers/net/wireless/ath/ath11k/cfr.h


base-commit: 4465d808fda12fa47f83733a9f7b7dbc29d0ea54
prerequisite-patch-id: f44bdcbd36af0c3fd57b477848bf4699cade9389
prerequisite-patch-id: 76c61f8f00aac2a3b9ff31e0166bb12997c2b0cf
prerequisite-patch-id: 886b24b2496167c304e8ed42b5d879e0ecab111c
prerequisite-patch-id: 672baf608620c531b3765941c2719ad9d34b99c1
prerequisite-patch-id: 07c9ff6fcaf4ba464be993caa19eb49113eedbdf
-- 
2.34.1
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.