[PATCH] PCI: Add Broadcom 4331 reset quirk to prevent IRQ storm

On 29 March 2016 at 20:20, Lukas Wunner <[email protected]> wrote:
> Broadcom 4331 wireless cards built into Apple Macs unleash an IRQ storm
> on boot until they are reset, causing spurious interrupts if the IRQ is
> shared. Apparently the EFI bootloader enables the device and does not
> disable it before passing control to the OS. The bootloader contains a
> driver for the wireless card which allows it to phone home to Cupertino.
> This is used for Internet Recovery (download and install OS X images)
> and probably also for Back to My Mac (remote access, RFC 6281) and to
> discover stolen hardware.
>
> The issue is most pronounced on 2011 and 2012 MacBook Pros where the IRQ
> is shared with 3 other devices (Light Ridge Thunderbolt controller, SDXC
> reader, HDA card on discrete GPU). As soon as an interrupt handler is
> installed for one of these devices, the ensuing storm of spurious IRQs
> causes the kernel to disable the IRQ and switch to polling. This lasts
> until the b43 driver loads and resets the device.
>
> Loading the b43 driver first is not always an option, in particular with
> the Light Ridge Thunderbolt controller: The PCI hotplug IRQ handler gets
> installed early on because it is built in, unlike b43 which is usually
> a module.
>
> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=79301
> Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=895951
> Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1009819
> Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1149632
> Tested-by: Lukas Wunner <[email protected]> [MacBookPro9,1]
> Signed-off-by: Lukas Wunner <[email protected]>

Acked-by: Rafa? Mi?ecki <[email protected]>

For bcma part (I'm totally OK with moving BCMA_CORE_SIZE).