Broadcom BCM43162 [14e4:43ae] Support

Jan Sobotka <[email protected]>
Newsgroups org.infradead.lists.b43-dev
Message-ID <[email protected]>
Hi Rod,


I posted same question recently. Please refer to this thread http://lists.infradead.org/pipermail/b43-dev/2016-May/thread.html#3942


Jan


---------- P?vodn? zpr?va ----------
Od: Rod Manning 
Komu: b43-dev at lists.infradead.org
Datum: 13. 5. 2016 7:15:42
P?edm?t: Broadcom BCM43162 [14e4:43ae] Support

Hi,

Wondering if anyone can provide information on plans to support the
Broadcom BCM43162 adapter in the b43 kernel drivers?

Have tried other options with ndiswrapper etc. to no success. Wondering
whether to keep trying to get a solution/wait for driver vs just
replace the card...

(Happy to provide testing etc. if it helps out.)

--
Thanks for any info,

Rod

lspci output:
-----------------------------------------------------------------
03:00.0 Network controller [0280]: Broadcom Corporation BCM43162 802.11ac
Wireless Network Adapter [14e4:43ae] (rev 02)
????????Subsystem: Lenovo Device [17aa:0622]
????????Flags: bus master, fast devsel, latency 0, IRQ 255
????????Memory at f0c00000 (64-bit, non-prefetchable) [size=32K]
????????Memory at f0800000 (64-bit, non-prefetchable) [size=4M]
????????Capabilities: [48] Power Management version 3
????????Capabilities: [58] MSI: Enable- Count=1/1 Maskable- 64bit+
????????Capabilities: [68] Vendor Specific Information: Len=44 
????????Capabilities: [ac] Express Endpoint, MSI 00
????????Capabilities: [100] Advanced Error Reporting
????????Capabilities: [13c] Device Serial Number 00-00-08-ff-ff-00-30-0e
????????Capabilities: [150] Power Budgeting 
????????Capabilities: [160] Virtual Channel
????????Capabilities: [1b0] Latency Tolerance Reporting
????????Capabilities: [220] #15

_______________________________________________
b43-dev mailing list
b43-dev at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/b43-dev
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.