[PATCH] wireless: deprecate WDS and disable by default

Johannes Berg <[email protected]>
Newsgroups org.infradead.lists.b43-dev,org.ath9k.lists.ath9k-devel,org.kernel.vger.linux-wireless
Message-ID <[email protected]>
From: Johannes Berg <[email protected]>

The old WDS 4-addr frame support is very limited, e.g.
 * no encryption is possible on such links
 * it cannot support rate/HT/VHT negotiation
 * management APIs are very restricted

These make the WDS legacy mode useless in practice.

All of these are resolved by the 4-addr AP/client support,
so there's also no reason to improve WDS in the future.

Therefore, add a Kconfig option to disable legacy WDS.
This gives people an "emergency valve" while they migrate
to the better-supported 4-addr AP/client option; we plan
to remove it (and the associated cfg80211/mac80211 code,
which is the ultimate goal) in the future.

Signed-off-by: Johannes Berg <[email protected]>
---
 drivers/net/wireless/Kconfig                   | 13 +++++++++++++
 drivers/net/wireless/ath/ath9k/init.c          |  6 ++++++
 drivers/net/wireless/broadcom/b43/main.c       |  2 ++
 drivers/net/wireless/broadcom/b43legacy/main.c |  2 ++
 drivers/net/wireless/ralink/rt2x00/rt2x00dev.c |  6 ++++--
 net/wireless/core.c                            | 10 ++++++++++
 6 files changed, 37 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 8c8edaf1bba6..fa9c4fa9477e 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -17,6 +17,19 @@ menuconfig WLAN
 
 if WLAN
 
+config WIRELESS_WDS
+	bool "mac80211-based legacy WDS support"
+	help
+	  This option enables the deprecated WDS support, the newer
+	  mac80211-based 4-addr AP/client support supersedes it with
+	  a much better feature set (HT, VHT, ...)
+
+	  We plan to remove this option and code, so if you find
+	  that you have to enable it, please let us know on the
+	  linux-wireless at vger.kernel.org mailing list, so we can
+	  help you migrate to 4-addr AP/client (or, if it's really
+	  necessary, give up on our plan of removing it).
+
 source "drivers/net/wireless/admtek/Kconfig"
 source "drivers/net/wireless/ath/Kconfig"
 source "drivers/net/wireless/atmel/Kconfig"
diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c
index cfa3fe82ade3..368d9b313823 100644
--- a/drivers/net/wireless/ath/ath9k/init.c
+++ b/drivers/net/wireless/ath/ath9k/init.c
@@ -734,9 +734,11 @@ static const struct ieee80211_iface_limit if_limits[] = {
 				 BIT(NL80211_IFTYPE_P2P_GO) },
 };
 
+#ifdef CONFIG_WIRELESS_WDS
 static const struct ieee80211_iface_limit wds_limits[] = {
 	{ .max = 2048,	.types = BIT(NL80211_IFTYPE_WDS) },
 };
+#endif
 
 #ifdef CONFIG_ATH9K_CHANNEL_CONTEXT
 
@@ -774,6 +776,7 @@ static const struct ieee80211_iface_combination if_comb[] = {
 					BIT(NL80211_CHAN_WIDTH_40),
 #endif
 	},
+#ifdef CONFIG_WIRELESS_WDS
 	{
 		.limits = wds_limits,
 		.n_limits = ARRAY_SIZE(wds_limits),
@@ -781,6 +784,7 @@ static const struct ieee80211_iface_combination if_comb[] = {
 		.num_different_channels = 1,
 		.beacon_int_infra_match = true,
 	},
+#endif
 };
 
 #ifdef CONFIG_ATH9K_CHANNEL_CONTEXT
@@ -851,7 +855,9 @@ static void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
 			BIT(NL80211_IFTYPE_STATION) |
 			BIT(NL80211_IFTYPE_ADHOC) |
 			BIT(NL80211_IFTYPE_MESH_POINT) |
+#ifdef CONFIG_WIRELESS_WDS
 			BIT(NL80211_IFTYPE_WDS) |
+#endif
 			BIT(NL80211_IFTYPE_OCB);
 
 		if (ath9k_is_chanctx_enabled())
diff --git a/drivers/net/wireless/broadcom/b43/main.c b/drivers/net/wireless/broadcom/b43/main.c
index 6e5d9095b195..52f3541ecbcf 100644
--- a/drivers/net/wireless/broadcom/b43/main.c
+++ b/drivers/net/wireless/broadcom/b43/main.c
@@ -5591,7 +5591,9 @@ static struct b43_wl *b43_wireless_init(struct b43_bus_dev *dev)
 		BIT(NL80211_IFTYPE_AP) |
 		BIT(NL80211_IFTYPE_MESH_POINT) |
 		BIT(NL80211_IFTYPE_STATION) |
+#ifdef CONFIG_WIRELESS_WDS
 		BIT(NL80211_IFTYPE_WDS) |
+#endif
 		BIT(NL80211_IFTYPE_ADHOC);
 
 	hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
diff --git a/drivers/net/wireless/broadcom/b43legacy/main.c b/drivers/net/wireless/broadcom/b43legacy/main.c
index 83770d2ea057..e97ab2b91663 100644
--- a/drivers/net/wireless/broadcom/b43legacy/main.c
+++ b/drivers/net/wireless/broadcom/b43legacy/main.c
@@ -3838,7 +3838,9 @@ static int b43legacy_wireless_init(struct ssb_device *dev)
 	hw->wiphy->interface_modes =
 		BIT(NL80211_IFTYPE_AP) |
 		BIT(NL80211_IFTYPE_STATION) |
+#ifdef CONFIG_WIRELESS_WDS
 		BIT(NL80211_IFTYPE_WDS) |
+#endif
 		BIT(NL80211_IFTYPE_ADHOC);
 	hw->queues = 1; /* FIXME: hardware has more queues */
 	hw->max_rates = 2;
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
index 4e0c5653054b..236f790e097a 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
@@ -1362,11 +1362,13 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
 	if (rt2x00dev->bcn->limit > 0)
 		rt2x00dev->hw->wiphy->interface_modes |=
 		    BIT(NL80211_IFTYPE_ADHOC) |
-		    BIT(NL80211_IFTYPE_AP) |
 #ifdef CONFIG_MAC80211_MESH
 		    BIT(NL80211_IFTYPE_MESH_POINT) |
 #endif
-		    BIT(NL80211_IFTYPE_WDS);
+#ifdef CONFIG_WIRELESS_WDS
+		    BIT(NL80211_IFTYPE_WDS) |
+#endif
+		    BIT(NL80211_IFTYPE_AP);
 
 	rt2x00dev->hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
 
diff --git a/net/wireless/core.c b/net/wireless/core.c
index 8201e6d7449e..f433f15f9222 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -571,6 +571,11 @@ static int wiphy_verify_combinations(struct wiphy *wiphy)
 				return -EINVAL;
 		}
 
+#ifndef CONFIG_WIRELESS_WDS
+		if (WARN_ON(all_iftypes & BIT(NL80211_IFTYPE_WDS)))
+			return -EINVAL;
+#endif
+
 		/* You can't even choose that many! */
 		if (WARN_ON(cnt < c->max_interfaces))
 			return -EINVAL;
@@ -609,6 +614,11 @@ int wiphy_register(struct wiphy *wiphy)
 		     !rdev->ops->add_nan_func || !rdev->ops->del_nan_func)))
 		return -EINVAL;
 
+#ifndef CONFIG_WIRELESS_WDS
+	if (WARN_ON(wiphy->interface_modes & BIT(NL80211_IFTYPE_WDS)))
+		return -EINVAL;
+#endif
+
 	/*
 	 * if a wiphy has unsupported modes for regulatory channel enforcement,
 	 * opt-out of enforcement checking
-- 
2.8.1
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.