BCM4322 keeps switching band frequency

Can selcuk <[email protected]>
Newsgroups org.infradead.lists.b43-dev
Message-ID <[email protected]>
Hi,

How do I check the "scan dump" ? Could you please be more specific and 
explain what that means ?

Best,
Can

Le 2017-02-23 01:56, Adrian Chadd a ?crit?:
> On 22 February 2017 at 16:51, Dora Smith <[email protected]> wrote:
>> I'm confused.  A MAC is not a radio.   A wireless card definitely 
>> scans for
>> things to connect to, and then you choose a connection and connect.
> 
> The MAC has a PHY attached and a radio attached. The broadcom stuff
> can actually be, hm:
> 
> MAC <-> PHY <-> Radio
> 
> MAC <-> PHY-2G <-> radio 2G
>          PHY-5G <-> radio-5G
> 
> and some earlier things:
> 
> MAC-2G <-> PHY-2G <-> radio-2G
> MAC-5G <-> PHY-5G <-> radio-5G
> 
> So MAC and PHY can sometimes need switching...
> 
> 
> -adrian
> 
> 
>> If I ever ran into the card switching frequencies, I didn't know it.  
>> I did
>> however have constant problems with the connection.
>> 
>> I finally gave up on that card and installed another one with a 
>> different
>> manufacturer; no problems since.
>> 
>> Dora
>> 
>> -----Original Message----- From: Adrian Chadd
>> Sent: Wednesday, February 22, 2017 6:30 PM
>> To: Can selcuk
>> Cc: b43-dev at lists.infradead.org
>> Subject: Re: BCM4322 keeps switching band frequency
>> 
>> 
>> Hi,
>> 
>> That's the radio doing scanning. What's the "scan dump" output look 
>> like?
>> 
>> 
>> -adrian
>> 
>> 
>> On 22 February 2017 at 04:51, Can selcuk <[email protected]> wrote:
>>> 
>>> Hi I do have an old macbook (late 2008) with an embedded BCM4322 
>>> wireless
>>> device. I use the b43 driver and I keep getting 
>>> disconnected/reconnected
>>> as
>>> the driver switches band frequencies ..  I always had this issue with 
>>> all
>>> the kernels I used. Do you guys have any idea how to force the driver
>>> working at a single frequency ??
>>> 
>>> dmesg :
>>> 
>>> [   58.001746] b43-phy0 debug: Switching to 2.4 GHz band
>>> [   58.174227] b43-phy0 debug: Switching to 5 GHz band
>>> [   58.592232] b43-phy0 debug: Switching to 2.4 GHz band
>>> [   58.763176] b43-phy0 debug: Switching to 5 GHz band
>>> [   59.184229] b43-phy0 debug: Switching to 2.4 GHz band
>>> [   59.355203] b43-phy0 debug: Switching to 5 GHz band
>>> [   59.776220] b43-phy0 debug: Switching to 2.4 GHz band
>>> [   59.947211] b43-phy0 debug: Switching to 5 GHz band
>>> [   60.368227] b43-phy0 debug: Switching to 2.4 GHz band
>>> [   60.539231] b43-phy0 debug: Switching to 5 GHz band
>>> [   60.960210] b43-phy0 debug: Switching to 2.4 GHz band
>>> [ 61.135034] b43-phy0 debug: Switching to 5 GHz band
>>> [   61.552285] b43-phy0 debug: Switching to 2.4 GHz band
>>> [   61.723233] b43-phy0 debug: Switching to 5 GHz band
>>> [   62.145194] b43-phy0 debug: Switching to 2.4 GHz band
>>> [   62.321226] b43-phy0 debug: Switching to 5 GHz band
>>> [   62.736254] b43-phy0 debug: Switching to 2.4 GHz band
>>> [   62.913209] b43-phy0 debug: Switching to 5 GHz band
>>> [   63.328209] b43-phy0 debug: Switching to 2.4 GHz band
>>> [   63.500552] b43-phy0 debug: Switching to 5 GHz band
>>> [   63.920224] b43-phy0 debug: Switching to 2.4 GHz band
>>> [   64.094227] b43-phy0 debug: Switching to 5 GHz band
>>> [   64.512215] b43-phy0 debug: Switching to 2.4 GHz band
>>> [   64.685221] b43-phy0 debug: Switching to 5 GHz band
>>> [   65.112208] b43-phy0 debug: Switching to 2.4 GHz band
>>> [   65.284251] b43-phy0 debug: Switching to 5 GHz band
>>> 
>>> 
>>> uname -a
>>> 
>>> Linux djanboox 4.9.6-gentoo-r1-nouveau-kernel #2 SMP PREEMPT Wed Feb 
>>> 22
>>> 12:25:07 CET 2017 x86_64 Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz
>>> GenuineIntel GNU/Linux
>>> 
>>> lspci -vvn|grep 43 -A7
>>> 03:00.0 0280: 14e4:432b (rev 01)
>>>         Subsystem: 106b:008d
>>>         Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
>>> ParErr-
>>> Stepping- SERR- FastB2B- DisINTx-
>>>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast 
>>> >TAbort-
>>> <TAbort- <MAbort- >SERR- <PERR- INTx-
>>>         Latency: 0, Cache Line Size: 256 bytes
>>>         Interrupt: pin A routed to IRQ 20
>>>         Region 0: Memory at 93100000 (64-bit, non-prefetchable) 
>>> [size=16K]
>>>         Capabilities: [40] Power Management version 3
>>> --
>>>         Kernel driver in use: b43-pci-bridge
>>> 
>>> Best,
>>> Can
>>> 
>>> _______________________________________________
>>> b43-dev mailing list
>>> b43-dev at lists.infradead.org
>>> http://lists.infradead.org/mailman/listinfo/b43-dev
>> 
>> 
>> _______________________________________________
>> b43-dev mailing list
>> b43-dev at lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/b43-dev
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.