Re: [PATCH 0/3] mci: sdhci Rockchip tuning fixes
Sascha Hauer <[email protected]>
| Newsgroups | org.infradead.lists.barebox |
|---|---|
| Message-ID | <[email protected]> |
On Thu, 21 May 2026 10:05:04 +0200, Sascha Hauer wrote:
> Tuning operation on Rockchip used to fail. I never noticed because
> errors from tuning were not properly propagated. This is fixed in [1]
> and since this commit HSx00 speeds do not work work anymore. HS400
> modes worked for me despite the tuning failed, but with likely
> suboptimal timing. This series fixes this and we now pass tuning.
>
> Also switch the Rockchip SDHCI controller to the recently introduced
> sdhci_send_command() helper.
>
> [...]
Applied, thanks!
[1/3] mci: rockchip-dwcmshc-sdhci: poll DATA_AVAIL for tuning commands
https://git.pengutronix.de/cgit/barebox/commit/?id=e6932512834b (link may not be stable)
[2/3] mci: sdhci: Fix TIMEOUT_CONTROL register value
https://git.pengutronix.de/cgit/barebox/commit/?id=5290098d1266 (link may not be stable)
[3/3] mci: sdhci: rockchip: Use generic sdhci_send_command()
https://git.pengutronix.de/cgit/barebox/commit/?id=19ce0bdebf48 (link may not be stable)
Best regards,
--
Sascha Hauer <[email protected]>