Re: v2026.05.0
Ahmad Fatoum <[email protected]>
| Newsgroups | org.infradead.lists.barebox |
|---|---|
| Message-ID | <[email protected]> |
Hello Alexander, On 5/27/26 2:31 PM, Alexander Shiyan wrote: > Hello Ahmad. > > I haven't worked with these commands before, but it gives the following: It's well invested time. b4 is really nice. > > shc@gentoo /home/ARM64/barebox.b4 $ b4 shazam -H > 'https://lore.kernel.org/barebox/[email protected]/T/#t' The patch set applies on current master. Can you try again after fetching it, e.g. via: git fetch https://git.pengutronix.de/git/barebox master Cheers, Ahmad > Grabbing thread from > lore.kernel.org/all/[email protected]/t.mbox.gz > Checking for newer revisions > Grabbing search results from lore.kernel.org > Analyzing 6 messages in the thread > Analyzing 0 code-review messages > Checking attestation on all messages, may take a moment... > --- > ✓ [PATCH v2 1/5] arch: introduce new CONFIG_ARCH_HAS_MALLOC_SIZE > ✓ [PATCH v2 2/5] arch: introduce CONFIG_BAREBOX_MEMORY_OFFSET > ✓ [PATCH v2 3/5] ARM64: switch to CONFIG_BAREBOX_MEMORY_OFFSET > ✓ [PATCH v2 4/5] ARM64: configs: drop CONFIG_MALLOC_SIZE=0x0 as it's > now the default > ✓ [PATCH v2 5/5] ARM64: place PBL malloc area at start of barebox > proper malloc area > --- > ✓ Signed: DKIM/lists.infradead.org (From: [email protected]) > --- > Total patches: 5 > --- > Base: attempting to guess base-commit... > Base: tags/v2026.05.0-778-g20e641c7a5 (best guess, 18/24 blobs matched) > Magic: Preparing a sparse worktree > Unable to cleanly apply series, see failure log below > --- > Applying: arch: introduce new CONFIG_ARCH_HAS_MALLOC_SIZE > Applying: arch: introduce CONFIG_BAREBOX_MEMORY_OFFSET > Applying: ARM64: switch to CONFIG_BAREBOX_MEMORY_OFFSET > Applying: ARM64: configs: drop CONFIG_MALLOC_SIZE=0x0 as it's now the default > Applying: ARM64: place PBL malloc area at start of barebox proper malloc area > Patch failed at 0005 ARM64: place PBL malloc area at start of barebox > proper malloc area > error: patch failed: arch/arm/cpu/uncompress.c:75 > error: arch/arm/cpu/uncompress.c: patch does not apply > hint: Use 'git am --show-current-patch=diff' to see the failed patch > hint: When you have resolved this problem, run "git am --continue". > hint: If you prefer to skip this patch, run "git am --skip" instead. > hint: To restore the original branch and stop patching, run "git am --abort". > hint: Disable this message with "git config set advice.mergeConflict false" > --- > Not fetching into FETCH_HEAD > > Thanks! > > ср, 27 мая 2026 г. в 15:22, Ahmad Fatoum <[email protected]>: >> >> Hello Alexander, >> >> On 5/25/26 8:06 PM, Alexander Shiyan wrote: >>> Hello Ahmad. >>> >>> I typically use the master branch for my validation work. >>> This is also why I haven't been able to send the extlinux patch v3 yet >>> - the necessary code changes aren't currently in master. >>> If you could provide the required commits as a set that can be >>> cherry-picked directly onto master, I'd be happy to run a full test. >> >> v2 is based off master. You can apply it with: >> >> b4 shazam 'https://lore.kernel.org/barebox/[email protected]/T/#t' >> >> In case you didn't know, b4 shazam -H automatically tries to find a suitable >> base and then applies the patches onto it and points FETCH_HEAD there. >> >> Cheers, >> Ahmad >> >>> >>> Thanks! >>> >>> пт, 22 мая 2026 г. в 14:00, Ahmad Fatoum <[email protected]>: >>>> >>>> Hello Alexander, >>>> >>>> On 5/20/26 3:27 PM, Alexander Shiyan wrote: >>>>> Hello Sascha. >>>>> >>>>> Yes, that's how it works. >>>> >>>> Can you also give this here a test: >>>> https://lore.barebox.org/barebox/[email protected]/ >>>> >>>> Thanks! >>>> Ahmad >>>> >>>>> >>>>> The new version adds a different trap, but it's most likely a board >>>>> issue; I'll investigate. >>>>> >>>>> Thanks! >>>>> >>>>>> rockchip-dmc: rockchip_sdram_size(reg2=1000ea01, reg3=30000031) >>>>> rockchip-dmc: rank 2 cs0_col 10 cs1_col 10 bk 3 cs0_row 17 cs1_row 17 >>>>> bw 2 row_3_4 0 >>>>> rockchip-dmc: rk3568_ram_sizes() = 8589934592 >>>>> uncompress.c: memory at 0x00a00000, size 0xef600000 >>>>> endmem = 0xf0000000 >>>>> arm_mem_optee = 0xee000000+0x02000000 >>>>> arm_mem_scratch = 0xedff8000+0x00008000 >>>>> arm_mem_stack = 0xedff0000+0x00008000 >>>>> arm_mem_ttb = 0xedf80000+0x00040000 >>>>> arm_mem_barebox_image = 0xedc00000+0x00400000 >>>>> arm_mem_early_malloc = 0xedbe0000+0x00020000 >>>>> membase = 0x00a00000+0xef600000 >>>>> mmu: enabling MMU, ttb @ 0xedf80000 >>>>> mmu: __arch_remap_range: 0x00000000+0x8000000000 type UNCACHED >>>>> mmu: __arch_remap_range: 0x8000000000+0x8000000000 type UNCACHED >>>>> mmu: __arch_remap_range: 0x00a00000+0xef600000 type RWX >>>>> mmu: __arch_remap_range: 0x08400000+0x2000000 type FAULT >>>>> mmu: __arch_remap_range: 0x00b00000+0x60000 type RWX >>>>> uncompress.c: uncompressing barebox ELF at 0x0000000000b60680 (size >>>>> 0x000737a4) to 0xedc00000 (uncompressed size: 0x001bb598) >>>>> uncompress.c: relocating ELF in place >>>>> In-place ELF relocation: text_vaddr=0x0, text_offset=0x10000, >>>>> load_addr=00000000edc00000, offset=0xedc10000 >>>>> In-place ELF relocation completed successfully >>>>> pbl-mmu: Setting up MMU from ELF segments >>>>> pbl-mmu: Segment 0 not page-aligned, rounding >>>>> pbl-mmu: Segment 0: addr=0xedc10000 size=0x000b6000 flags=0x5 [R-X] -> >>>>> mmu_flags=0x3 >>>>> mmu: __arch_remap_range: 0xedc10000+0xb6000 type CODE >>>>> pbl-mmu: Segment 1 not page-aligned, rounding >>>>> pbl-mmu: Segment 1: addr=0xedcc6000 size=0x000b9000 flags=0x4 [R--] -> >>>>> mmu_flags=0x4 >>>>> mmu: __arch_remap_range: 0xedcc6000+0xb9000 type RO >>>>> pbl-mmu: Segment 3 not page-aligned, rounding >>>>> pbl-mmu: Segment 3: addr=0xedd7f000 size=0x00047000 flags=0x6 [RW-] -> >>>>> mmu_flags=0x1 >>>>> mmu: __arch_remap_range: 0xedd7f000+0x47000 type CACHED >>>>> pbl-mmu: MMU setup from ELF complete >>>>> uncompress.c: jumping to ELF entry point at 0x00000000edcc2c9c >>>>> start.c: memory at 0x00a00000, size 0xef600000 >>>>> start.c: initializing malloc pool at 0xadc10000 (size 0x40000000) >>>>> start.c: starting barebox... >>>>> initcall-> command_slice_init+0x0/0x3c >>>>> initcall-> globalvar_init+0x0/0x8c >>>>> initcall-> register_bus_class+0x0/0x20 >>>>> initcall-> platform_init+0x0/0x1c >>>>> initcall-> mdio_bus_init+0x0/0x1c >>>>> initcall-> register_mii_class+0x0/0x20 >>>>> initcall-> usb_bus_init+0x0/0x1c >>>>> initcall-> otg_bus_init+0x0/0x1c >>>>> initcall-> register_udc_class+0x0/0x20 >>>>> initcall-> spi_bus_init+0x0/0x1c >>>>> initcall-> i2c_bus_init+0x0/0x1c >>>>> initcall-> register_i2c_adapter_class+0x0/0x20 >>>>> initcall-> register_mmc_class+0x0/0x20 >>>>> initcall-> register_fb_class+0x0/0x20 >>>>> initcall-> register_backlight_class+0x0/0x20 >>>>> initcall-> nvmem_init+0x0/0x14 >>>>> initcall-> register_nvmem_class+0x0/0x20 >>>>> initcall-> register_watchdog_class+0x0/0x20 >>>>> initcall-> gpio_desc_alloc+0x0/0x24 >>>>> initcall-> pci_bus_init+0x0/0x1c >>>>> initcall-> scmi_bus_driver_init+0x0/0x40 >>>>> initcall-> register_phy_class+0x0/0x20 >>>>> initcall-> register_eth_class+0x0/0x20 >>>>> initcall-> fs_bus_init+0x0/0x1c >>>>> initcall-> defaultenv_init+0x0/0x6c >>>>> initcall-> console_common_init+0x0/0xac >>>>> initcall-> partitions_init+0x0/0x50 >>>>> initcall-> genpd_bus_init+0x0/0x1c >>>>> initcall-> rk_clk_gate_link_driver_register+0x0/0x1c >>>>> initcall-> clk_rk3568_driver_register+0x0/0x1c >>>>> initcall-> clk_rk3588_driver_register+0x0/0x1c >>>>> initcall-> scmi_clocks_driver_register+0x0/0x1c >>>>> initcall-> gated_fixed_clk_driver_register+0x0/0x1c >>>>> initcall-> gpio_gate_clock_driver_register+0x0/0x1c >>>>> initcall-> syscon_driver_register+0x0/0x1c >>>>> initcall-> rockchip_gpio_driver_register+0x0/0x1c >>>>> initcall-> rockchip_pinctrl_driver_register+0x0/0x1c >>>>> initcall-> simple_pm_bus_driver_register+0x0/0x1c >>>>> initcall-> scmi_drv_register+0x0/0x1c >>>>> initcall-> scmi_reset_driver_register+0x0/0x1c >>>>> initcall-> arm_scmi_driver_register+0x0/0x1c >>>>> initcall-> scmi_power_domain_driver_register+0x0/0x1c >>>>> initcall-> aarch64_init_vectors+0x0/0x50 >>>>> initcall-> of_arm_init+0x0/0x2c >>>>> deep-probe: enabled in device tree >>>>> initcall-> register_autoboot_vars+0x0/0x7c >>>>> initcall-> system_partitions_var_init+0x0/0x50 >>>>> initcall-> register_env_vars+0x0/0x30 >>>>> initcall-> mipi_dsi_bus_init+0x0/0x1c >>>>> initcall-> arm_arch_timer_driver_register+0x0/0x1c >>>>> initcall-> of_init_early_vars+0x0/0x8 >>>>> initcall-> of_timer_init+0x0/0x20 >>>>> initcall-> rockchip_pm_domain_drv_register+0x0/0x1c >>>>> initcall-> net_init+0x0/0x94 >>>>> initcall-> init_fs+0x0/0x2c >>>>> initcall-> rockchip_init+0x0/0xe8 >>>>> initcall-> ns16550_serial_driver_register+0x0/0x1c >>>>> initcall-> dos_partition_init+0x0/0x1c >>>>> initcall-> efi_partition_init+0x0/0x1c >>>>> initcall-> of_stdoutpath_init+0x0/0x28 >>>>> Switch to console [cs0] >>>>> >>>>> >>>>> barebox 2026.05.0-00773-g4ba3c57b6144-dirty #5 Wed May 20 16:20:30 MSK 2026 >>>>> >>>>> >>>>> Board: Diasom DS-RK3568-SMARC-EVB >>>>> start.c: memory at 0x00a00000, size 0xef600000 >>>>> start.c: initializing malloc pool at 0xadc10000 (size 0x40000000) >>>>> start.c: starting barebox... >>>>> initcall-> command_slice_init+0x0/0x3c >>>>> initcall-> globalvar_init+0x0/0x8c >>>>> initcall-> register_bus_class+0x0/0x20 >>>>> initcall-> platform_init+0x0/0x1c >>>>> initcall-> mdio_bus_init+0x0/0x1c >>>>> initcall-> register_mii_class+0x0/0x20 >>>>> initcall-> usb_bus_init+0x0/0x1c >>>>> initcall-> otg_bus_init+0x0/0x1c >>>>> initcall-> register_udc_class+0x0/0x20 >>>>> initcall-> spi_bus_init+0x0/0x1c >>>>> initcall-> i2c_bus_init+0x0/0x1c >>>>> initcall-> register_i2c_adapter_class+0x0/0x20 >>>>> initcall-> register_mmc_class+0x0/0x20 >>>>> initcall-> register_fb_class+0x0/0x20 >>>>> initcall-> register_backlight_class+0x0/0x20 >>>>> initcall-> nvmem_init+0x0/0x14 >>>>> initcall-> register_nvmem_class+0x0/0x20 >>>>> initcall-> register_watchdog_class+0x0/0x20 >>>>> initcall-> gpio_desc_alloc+0x0/0x24 >>>>> initcall-> pci_bus_init+0x0/0x1c >>>>> initcall-> scmi_bus_driver_init+0x0/0x40 >>>>> initcall-> register_phy_class+0x0/0x20 >>>>> initcall-> register_eth_class+0xinitcall-> of_probe_memory+0x0/0x60 >>>>> initcall-> rockchip_dmc_driver_init+0x0/0x324 >>>>> rockchip-dmc memory-controller.of: Detected memory size: 0x200000000 >>>>> initcall-> __image_start+0x0/0x74 >>>>> initcall-> mem_register_barebox+0x0/0x4c >>>>> initcall-> of_reserved_mem_walk+0x0/0x1bc >>>>> initcall-> mmu_init+0x0/0x1e0 >>>>> initcall-> mem_malloc_resource+0x0/0xdc >>>>> initcall-> reset_source_init+0x0/0x50 >>>>> initcall-> usbgadget_globalvars_init+0x0/0x44 >>>>> initcall-> bootsource_init+0x0/0x40 >>>>> initcall-> usb_udc_init+0x0/0x20 >>>>> initcall-> rockchip_spi_driver_register+0x0/0x1c >>>>> initcall-> rk3x_i2c_driver_register+0x0/0x1c >>>>> initcall-> rk808_spi_driver_register+0x0/0x28 >>>>> initcall-> rk808_i2c_driver_register+0x0/0x28 >>>>> initcall-> regulator_fixed_driver_register+0x0/0x1c >>>>> initcall-> rockchip_usb2phy_driver_register+0x0/0x1c >>>>> initcall-> rockchip_combphy_driver_register+0x0/0x1c >>>>> initcall-> rockchip_p3phy_driver_register+0x0/0x1c >>>>> initcall-> rk_udphy_driver_register+0x0/0x1c >>>>> initcall-> rockchip_iodomain_driver_register+0x0/0x1c >>>>> initcall-> digest_hmac_initcall+0x0/0x44 >>>>> initcall-> sha1_digest_register+0x0/0x1c >>>>> initcall-> sha256_digest_register+0x0/0x1c >>>>> initcall-> ext_init+0x0/0x1c >>>>> initcall-> ramfs_init+0x0/0x1c >>>>> initcall-> tftp_init+0x0/0x38 >>>>> initcall-> nfs_init+0x0/0x5c >>>>> initcall-> fat_init+0x0/0x1c >>>>> initcall-> diasom_rk3568_driver_register+0x0/0x1c >>>>> initcall-> diasom_rk3588_driver_register+0x0/0x1c >>>>> initcall-> psci_driver_register+0x0/0x1c >>>>> initcall-> arm_request_stack+0x0/0x4c >>>>> initcall-> mount_root+0x0/0x74 >>>>> initcall-> binfmt_sh_init+0x0/0x1c >>>>> initcall-> binfmt_uimage_init+0x0/0x1c >>>>> initcall-> png_init+0x0/0x1c >>>>> initcall-> extlinux_init+0x0/0x1c >>>>> initcall-> of_kernel_init+0x0/0x28 >>>>> initcall-> console_ctrlc_init+0x0/0x30 >>>>> initcall-> firmware_init+0x0/0x38 >>>>> initcall-> bootdef_entry_init+0x0/0x1c >>>>> initcall-> fastboot_globalvars_init+0x0/0x12c >>>>> initcall-> genphy_driver_register+0x0/0x1c >>>>> initcall-> realtek_drvs_register+0x0/0x20 >>>>> initcall-> mdio_gpio_driver_register+0x0/0x1c >>>>> initcall-> rk_gmac_driver_register+0x0/0x1c >>>>> initcall-> rtl8169_eth_driver_register+0x0/0x1c >>>>> initcall-> usb_hub_init+0x0/0x1c >>>>> initcall-> dwc3_driver_register+0x0/0x1c >>>>> initcall-> usb_stor_init+0x0/0x1c >>>>> initcall-> ehci_driver_register+0x0/0x1c >>>>> initcall-> xhci_driver_register+0x0/0x1c >>>>> initcall-> gsermod_init+0x0/0x1c >>>>> initcall-> acmmod_init+0x0/0x1c >>>>> initcall-> dfumod_init+0x0/0x1c >>>>> initcall-> fastbootmod_init+0x0/0x1c >>>>> initcall-> umsmod_init+0x0/0x1c >>>>> initcall-> onboard_dev_driver_register+0x0/0x1c >>>>> initcall-> pca954x_driver_register+0x0/0x28 >>>>> initcall-> rk_sdhci_driver_register+0x0/0x1c >>>>> initcall-> dw_mmc_driver_register+0x0/0x1c >>>>> initcall-> backlight_pwm_of_driver_register+0x0/0x1c >>>>> initcall-> vop2_driver_register+0x0/0x1c >>>>> initcall-> dw_hdmi_rockchip_driver_register+0x0/0x1c >>>>> initcall-> dw_mipi_dsi_rockchip_driver_register+0x0/0x1c >>>>> initcall-> led_gpio_of_driver_register+0x0/0x1c >>>>> initcall-> at24_driver_register+0x0/0x28 >>>>> initcall-> rockchip_pwm_driver_register+0x0/0x1c >>>>> initcall-> sram_driver_register+0x0/0x1c >>>>> initcall-> mem_init+0x0/0x90 >>>>> initcall-> nvmem_cells_driver_register+0x0/0x1c >>>>> initcall-> rmem_driver_register+0x0/0x1c >>>>> initcall-> rockchip_otp_driver_register+0x0/0x1c >>>>> initcall-> dw_wdt_driver_register+0x0/0x1c >>>>> initcall-> pca953x_driver_register+0x0/0x28 >>>>> initcall-> rk_rng_driver_register+0x0/0x1c >>>>> initcall-> of_partition_init+0x0/0x48 >>>>> initcall-> of_overlay_init+0x0/0x104 >>>>> initcall-> fan53555_regulator_driver_register+0x0/0x28 >>>>> initcall-> rk808_regulator_driver_register+0x0/0x1c >>>>> initcall-> rockchip_pcie_driver_register+0x0/0x1c >>>>> initcall-> inno_dsidphy_driver_register+0x0/0x1c >>>>> initcall-> rockchip_saradc_driver_register+0x0/0x1c >>>>> initcall-> nvme_driver_register+0x0/0x1c >>>>> initcall-> gpio_restart_driver_register+0x0/0x1c >>>>> initcall-> prng_init+0x0/0x40 >>>>> initcall-> null_init+0x0/0x40 >>>>> initcall-> full_init+0x0/0x40 >>>>> initcall-> zero_init+0x0/0x40 >>>>> initcall-> md5_digest_register+0x0/0x1c >>>>> initcall-> sha224_digest_register+0x0/0x1c >>>>> initcall-> init_net_poll+0x0/0x24 >>>>> initcall-> netconsole_init+0x0/0x12c >>>>> netconsole: registered as netconsole-1 >>>>> initcall-> diasom_rk3568_init+0x0/0x448 >>>>> CPU version 0x03 detected. >>>>> rk808 rk8090: chip id: 0x8090 >>>>> vcc_ddr: Bringing 500000uV into 1100000-1100000uV >>>>> vdd_npu: Bringing 500000uV into 850000-850000uV >>>>> vdda0v9_image: Bringing 600000uV into 900000-900000uV >>>>> vcca1v8_image: Bringing 600000uV into 1800000-1800000uV >>>>> rockchip_saradc [email protected]: registered as aiodev0 >>>>> SOM version 2+ detected. >>>>> SMARC version 3 used. >>>>> arm-scmi firmware:scmi.of: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0 >>>>> psci psci.of: detected version 1.1 >>>>> xHCI xHCI0: USB XHCI 1.10 >>>>> xHCI xHCI1: USB XHCI 1.10 >>>>> ehci [email protected]: USB EHCI 1.00 >>>>> ehci [email protected]: USB EHCI 1.00 >>>>> fan53555-regulator tcs45250: FAN53555 Option[12] Rev[15] Detected! >>>>> mdio_bus: miibus0: probed >>>>> dwhdmi-rockchip [email protected]: registered I2C bus driver >>>>> dwhdmi-rockchip [email protected]: Detected HDMI TX controller >>>>> v2.11a with HDCP (DWC HDMI 2.0 TX PHY) >>>>> rockchip-vop2 [email protected]: Registered fb0 on VP0, window >>>>> Smart0-win0, type primary >>>>> rockchip-vop2 [email protected]: Registered fb0_0 on VP0, >>>>> window Smart1-win0, type overlay >>>>> rockchip-vop2 [email protected]: Registered fb0_1 on VP0, >>>>> window Esmart1-win0, type overlay >>>>> rockchip-vop2 [email protected]: Registered fb0_2 on VP0, >>>>> window Esmart0-win0, type overlay >>>>> rockchip-dw-pcie [email protected]: Phy link never came up >>>>> dw_mmc [email protected]: registered as mmc1 >>>>> mmc1: detected SD card version 3.0 >>>>> WARNING: mmc1: GPT:Primary header thinks Alt. header is not at the end >>>>> of the disk. >>>>> WARNING: mmc1: GPT:2669671 != 62333951 >>>>> WARNING: mmc1: GPT:Alternate GPT header not at the end of the disk. >>>>> WARNING: mmc1: GPT:2669671 != 62333951 >>>>> mmc1: GPT: will repair later if global.system.gpt_refresh=1 >>>>> mmc1: registered mmc1 >>>>> rk3568-dwcmshc-sdhci [email protected]: registered as mmc0 >>>>> mmc0: detected MMC card version 5.1 >>>>> mmc0: registered mmc0.boot0 >>>>> mmc0: registered mmc0.boot1 >>>>> mmc0: registered mmc0 >>>>> i2c2: Added multiplexed i2c bus 6 >>>>> i2c2: Added multiplexed i2c bus 7 >>>>> i2c2: Added multiplexed i2c bus 8 >>>>> i2c2: Added multiplexed i2c bus 9 >>>>> pca954x pca95460: registered 4 multiplexed busses for I2C switch >>>>> phy6: lane number 0, val 1 >>>>> phy6: lane number 1, val 2 >>>>> phy6: bifurcation enabled >>>>> rockchip-dw-pcie [email protected]: Phy link never came up >>>>> mdio_bus: miibus1: probed >>>>> mdio_bus: miibus2: probed >>>>> PANIC: unable to handle NULL pointer dereference at address 0x0000000000000018 >>>>> DABT (current EL) (ESR 0x9600000b) >>>>> elr: 00000000edc6ff00 lr : 00000000edc6ff00 >>>>> x0 : 00000000edcd5c17 x1 : 00000000edd7f000 >>>>> x2 : 0000000000000000 x3 : 0000000000000030 >>>>> x4 : 0000000000000000 x5 : 00000000edff7d18 >>>>> x6 : 0000000000000002 x7 : 0000000000000000 >>>>> x8 : 00000000aff3aa90 x9 : 6f2e726f74616c75 >>>>> x10: 63702d3376336363 x11: 6b6c632d30336569 >>>>> x12: 00000000edff7b30 x13: 00000000ffffffc8 >>>>> x14: 0000000000000001 x15: 0000000000000000 >>>>> x16: 00000000edccb95f x17: 0000000000000000 >>>>> x18: 000000000000000a x19: 00000000aff3aa60 >>>>> x20: 0000000000000000 x21: 0000000000000010 >>>>> x22: 0000000000000000 x23: 00000000edcd5c17 >>>>> x24: 0000000000000000 x25: 00000000f0000000 >>>>> x26: 00000000000737a4 x27: 00000000001bb598 >>>>> x28: 0000000000000000 x29: 00000000edff7dd0 >>>>> >>>>> Call trace: >>>>> [<edc6ff00>] (__of_new_property+0x38/0x74) from [<edc6ff94>] >>>>> (of_new_property+0x58/0x6c) >>>>> [<edc6ff94>] (of_new_property+0x58/0x6c) from [<edc700d0>] >>>>> (of_property_write_bool+0x5c/0x68) >>>>> [<edc700d0>] (of_property_write_bool+0x5c/0x68) from [<edc7013c>] >>>>> (of_set_root_node+0x60/0x88) >>>>> [<edc7013c>] (of_set_root_node+0x60/0x88) from [<edcc0854>] >>>>> (diasom_rk3568_init+0x230/0x448) >>>>> [<edcc0854>] (diasom_rk3568_init+0x230/0x448) from [<edc125f4>] >>>>> (start_barebox+0x84/0xa4) >>>>> [<edc125f4>] (start_barebox+0x84/0xa4) from [<edcc2d74>] >>>>> (barebox_non_pbl_start+0xd8/0xe8) >>>>> [<edcc2d74>] (barebox_non_pbl_start+0xd8/0xe8) from [<00b02cfc>] (0xb02cfc) >>>>> [<00b02cfc>] (0xb02cfc) from [<00b020c4>] (0xb020c4) >>>>> >>>>> ### ERROR ### Please RESET the board ### >>>>> >>>>> ср, 20 мая 2026 г. в 16:17, Sascha Hauer <[email protected]>: >>>>>> >>>>>> On 2026-05-20 15:11, Alexander Shiyan wrote: >>>>>>> Here is output with lowlevel debug: >>>>>>> DDR 03ea844c5d typ 24/09/03-10:42:57,fwver: v1.23 >>>>>>> In >>>>>>> ... >>>>>>> out >>>>>>>> rockchip-dmc: rockchip_sdram_size(reg2=1000ea01, reg3=30000031) >>>>>>> rockchip-dmc: rank 2 cs0_col 10 cs1_col 10 bk 3 cs0_row 17 cs1_row 17 >>>>>>> bw 2 row_3_4 0 >>>>>>> rockchip-dmc: rk3568_ram_sizes() = 8589934592 >>>>>>> mmu: enabling MMU, ttb @ 0xedf80000 >>>>>>> mmu: __arch_remap_range: 0x00000000+0x8000000000 type UNCACHED >>>>>>> mmu: __arch_remap_range: 0x8000000000+0x8000000000 type UNCACHED >>>>>>> mmu: __arch_remap_range: 0x00a00000+0xef600000 type RWX >>>>>>> mmu: __arch_remap_range: 0xee000000+0x2000000 type FAULT >>>>>>> mmu: __arch_remap_range: 0x00b00000+0x60000 type RWX >>>>>> >>>>>> Damn. I introduced this: >>>>>> >>>>>> pbl_malloc_init(membase[0] + memsize[0] - PBL_MALLOC_SIZE, PBL_MALLOC_SIZE); >>>>>> >>>>>> This exactly ends up in the area marked as FAULT above (reserved for >>>>>> OP-TEE). >>>>>> >>>>>> Try this: >>>>>> >>>>>> pbl_malloc_init(membase[0] + memsize[0] - OPTEE_SIZE - PBL_MALLOC_SIZE, >>>>>> PBL_MALLOC_SIZE); >>>>>> >>>>>> You have XZ as image compression, right? >>>>>> >>>>>> The rockchip_v8_defconfig uses LZ4 which doesn't need any dynamic memory >>>>>> for decompression. I tested with XZ as well, but the configuration I >>>>>> used for this test doesn't have OP-TEE enabled, so the faulting area was >>>>>> not there. >>>>>> >>>>>> Sascha >>>>>> >>>>>> -- >>>>>> Pengutronix e.K. | | >>>>>> Steuerwalder Str. 21 | http://www.pengutronix.de/ | >>>>>> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | >>>>>> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | >>>>> >>>>> >>>> >>>> -- >>>> Pengutronix e.K. | | >>>> Steuerwalder Str. 21 | http://www.pengutronix.de/ | >>>> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | >>>> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | >>>> >>> >> >> -- >> Pengutronix e.K. | | >> Steuerwalder Str. 21 | http://www.pengutronix.de/ | >> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | >> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | >> > -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |