Re: [PATCH master v2 5/5] ARM64: place PBL malloc area at start of barebox proper malloc area
Alexander Shiyan <[email protected]>
| Newsgroups | org.infradead.lists.barebox |
|---|---|
| Message-ID | <CAP1tNvT23wr-_Usy5q+VMu3qLXAfmWEnRTP=WqrMx+e7Bk-D8A@mail.gmail.com> |
Tested-by: Alexander Shiyan <[email protected]> ср, 27 мая 2026 г. в 15:17, Ahmad Fatoum <[email protected]>: > > The early PBL malloc area used by the Rockchip code overlaps the region > used for OP-TEE. Moving it a bit lower would overlap the region occupied > by the scratch area. > > With the switch to CONFIG_BAREBOX_MEMORY_OFFSET, we can compute the start > of the malloc area in barebox proper without knowing how big barebox will > eventually be, so make use of that and always place the PBL malloc area > exactly at the start of the eventual barebox proper memory area. > > The memory will automatically be reclaimed when the TLSF allocator is > instantiated and we will be sure not to overwrite anything by allocating > in PBL. > > Reported-by: Alexander Shiyan <[email protected]> > Fixes: 76b1f31275fe ("ARM: rockchip: initialize PBL malloc") > Signed-off-by: Ahmad Fatoum <[email protected]> > --- > arch/arm/cpu/common.c | 5 +++++ > arch/arm/cpu/uncompress.c | 4 ++++ > arch/arm/include/asm/barebox-arm.h | 10 ++++++---- > arch/arm/mach-rockchip/atf.c | 2 +- > 4 files changed, 16 insertions(+), 5 deletions(-) > > diff --git a/arch/arm/cpu/common.c b/arch/arm/cpu/common.c > index 6b82ee8b810c..adb5d6a02bc8 100644 > --- a/arch/arm/cpu/common.c > +++ b/arch/arm/cpu/common.c > @@ -114,8 +114,13 @@ void print_pbl_mem_layout(ulong membase, ulong endmem, ulong barebox_base) > #endif > printf("arm_mem_barebox_image = 0x%08lx+0x%08lx\n", > barebox_base, arm_mem_barebox_image_end(endmem) - barebox_base); > +#ifdef CONFIG_ARM64 > + printf("pbl_malloc area = 0x%08lx+0x%08x\n", > + barebox_malloc_base(membase, endmem - membase), PBL_MALLOC_SIZE); > +#else > printf("arm_mem_early_malloc = 0x%08lx+0x%08x\n", > barebox_base - PBL_MALLOC_SIZE, PBL_MALLOC_SIZE); > +#endif > printf("membase = 0x%08lx+0x%08lx\n", > membase, endmem - membase); > } > diff --git a/arch/arm/cpu/uncompress.c b/arch/arm/cpu/uncompress.c > index 61bcba6e8549..55bbe0019cc4 100644 > --- a/arch/arm/cpu/uncompress.c > +++ b/arch/arm/cpu/uncompress.c > @@ -75,7 +75,11 @@ void __noreturn barebox_pbl_start(unsigned long membase, unsigned long memsize, > > handoff_data = (void *)barebox_base + ALIGN(uncompressed_len, 8) + MAX_BSS_SIZE; > > +#ifdef CONFIG_ARM64 > + pbl_malloc_init(barebox_malloc_base(membase, memsize), PBL_MALLOC_SIZE); > +#else > pbl_malloc_init(barebox_base - PBL_MALLOC_SIZE, PBL_MALLOC_SIZE); > +#endif > > #ifdef DEBUG > print_pbl_mem_layout(membase, endmem, barebox_base); > diff --git a/arch/arm/include/asm/barebox-arm.h b/arch/arm/include/asm/barebox-arm.h > index 38cceba010ed..f75cddc77243 100644 > --- a/arch/arm/include/asm/barebox-arm.h > +++ b/arch/arm/include/asm/barebox-arm.h > @@ -95,10 +95,12 @@ void *barebox_arm_boot_dtb(void); > * + BSS) rounded to SZ_1M > * ↓ > * ---------------------- arm_mem_barebox_image() --------------------- > - * ↑ > - * SZ_128K > - * ↓ > - * ------------------------ arm_mem_early_malloc ---------------------- > + * ARM32 ↑ | ↕ ARM64 > + * PBL_MALLOC_SIZE |------- pbl_malloc area end ------ > + * ↓ | ↑ > + * --- arm_mem_early_malloc --------| PBL_MALLOC_SIZE > + * | ↓ > + * ----- pbl_malloc area start ------- > */ > void print_pbl_mem_layout(ulong membase, ulong endmem, ulong barebox_base); > > diff --git a/arch/arm/mach-rockchip/atf.c b/arch/arm/mach-rockchip/atf.c > index 14797a1e0601..f9dbc8b20c5a 100644 > --- a/arch/arm/mach-rockchip/atf.c > +++ b/arch/arm/mach-rockchip/atf.c > @@ -173,7 +173,7 @@ static void rockchip_atf_load_bl31(void *fdt) > unsigned long bl31_ep; > > mmu_early_enable(membase[0], memsize[0]); > - pbl_malloc_init(membase[0] + memsize[0] - PBL_MALLOC_SIZE, PBL_MALLOC_SIZE); > + pbl_malloc_init(membase[0], memsize[0]); > > bl31_ep = load_elf64_image_phdr(&bl31); > > -- > 2.47.3 >