Re: [PATCH master v2 5/5] ARM64: place PBL malloc area at start of barebox proper malloc area

Hello Ahmad.

Just checked the fixup.

чт, 28 мая 2026 г. в 14:04, Ahmad Fatoum <[email protected]>:
>
> Hi,
>
> On 5/27/26 3:12 PM, Alexander Shiyan wrote:
> > Tested-by: Alexander Shiyan <[email protected]>
>
> Unfortunately, I placed the very early malloc area at the wrong place.
>
> I just sent out v3 and would appreciate if you can check if that also
> works for you.
>
> Cheers,
> Ahmad
>
> >
> > ср, 27 мая 2026 г. в 15:17, Ahmad Fatoum <[email protected]>:
> >>
> >> The early PBL malloc area used by the Rockchip code overlaps the region
> >> used for OP-TEE. Moving it a bit lower would overlap the region occupied
> >> by the scratch area.
> >>
> >> With the switch to CONFIG_BAREBOX_MEMORY_OFFSET, we can compute the start
> >> of the malloc area in barebox proper without knowing how big barebox will
> >> eventually be, so make use of that and always place the PBL malloc area
> >> exactly at the start of the eventual barebox proper memory area.
> >>
> >> The memory will automatically be reclaimed when the TLSF allocator is
> >> instantiated and we will be sure not to overwrite anything by allocating
> >> in PBL.
> >>
> >> Reported-by: Alexander Shiyan <[email protected]>
> >> Fixes: 76b1f31275fe ("ARM: rockchip: initialize PBL malloc")
> >> Signed-off-by: Ahmad Fatoum <[email protected]>
> >> ---
> >>  arch/arm/cpu/common.c              |  5 +++++
> >>  arch/arm/cpu/uncompress.c          |  4 ++++
> >>  arch/arm/include/asm/barebox-arm.h | 10 ++++++----
> >>  arch/arm/mach-rockchip/atf.c       |  2 +-
> >>  4 files changed, 16 insertions(+), 5 deletions(-)
> >>
> >> diff --git a/arch/arm/cpu/common.c b/arch/arm/cpu/common.c
> >> index 6b82ee8b810c..adb5d6a02bc8 100644
> >> --- a/arch/arm/cpu/common.c
> >> +++ b/arch/arm/cpu/common.c
> >> @@ -114,8 +114,13 @@ void print_pbl_mem_layout(ulong membase, ulong endmem, ulong barebox_base)
> >>  #endif
> >>         printf("arm_mem_barebox_image = 0x%08lx+0x%08lx\n",
> >>                barebox_base, arm_mem_barebox_image_end(endmem) - barebox_base);
> >> +#ifdef CONFIG_ARM64
> >> +       printf("pbl_malloc area       = 0x%08lx+0x%08x\n",
> >> +              barebox_malloc_base(membase, endmem - membase), PBL_MALLOC_SIZE);
> >> +#else
> >>         printf("arm_mem_early_malloc  = 0x%08lx+0x%08x\n",
> >>                barebox_base - PBL_MALLOC_SIZE, PBL_MALLOC_SIZE);
> >> +#endif
> >>         printf("membase               = 0x%08lx+0x%08lx\n",
> >>                membase, endmem - membase);
> >>  }
> >> diff --git a/arch/arm/cpu/uncompress.c b/arch/arm/cpu/uncompress.c
> >> index 61bcba6e8549..55bbe0019cc4 100644
> >> --- a/arch/arm/cpu/uncompress.c
> >> +++ b/arch/arm/cpu/uncompress.c
> >> @@ -75,7 +75,11 @@ void __noreturn barebox_pbl_start(unsigned long membase, unsigned long memsize,
> >>
> >>         handoff_data = (void *)barebox_base + ALIGN(uncompressed_len, 8) + MAX_BSS_SIZE;
> >>
> >> +#ifdef CONFIG_ARM64
> >> +       pbl_malloc_init(barebox_malloc_base(membase, memsize), PBL_MALLOC_SIZE);
> >> +#else
> >>         pbl_malloc_init(barebox_base - PBL_MALLOC_SIZE, PBL_MALLOC_SIZE);
> >> +#endif
> >>
> >>  #ifdef DEBUG
> >>         print_pbl_mem_layout(membase, endmem, barebox_base);
> >> diff --git a/arch/arm/include/asm/barebox-arm.h b/arch/arm/include/asm/barebox-arm.h
> >> index 38cceba010ed..f75cddc77243 100644
> >> --- a/arch/arm/include/asm/barebox-arm.h
> >> +++ b/arch/arm/include/asm/barebox-arm.h
> >> @@ -95,10 +95,12 @@ void *barebox_arm_boot_dtb(void);
> >>   *                       + BSS) rounded to SZ_1M
> >>   *                                   ↓
> >>   *  ---------------------- arm_mem_barebox_image() ---------------------
> >> - *                                   ↑
> >> - *                                SZ_128K
> >> - *                                   ↓
> >> - *  ------------------------ arm_mem_early_malloc ----------------------
> >> + *     ARM32      ↑                  |                ↕         ARM64
> >> + *         PBL_MALLOC_SIZE           |------- pbl_malloc area end ------
> >> + *                ↓                  |                ↑
> >> + *  --- arm_mem_early_malloc --------|         PBL_MALLOC_SIZE
> >> + *                                   |                ↓
> >> + *                                   ----- pbl_malloc area start -------
> >>   */
> >>  void print_pbl_mem_layout(ulong membase, ulong endmem, ulong barebox_base);
> >>
> >> diff --git a/arch/arm/mach-rockchip/atf.c b/arch/arm/mach-rockchip/atf.c
> >> index 14797a1e0601..f9dbc8b20c5a 100644
> >> --- a/arch/arm/mach-rockchip/atf.c
> >> +++ b/arch/arm/mach-rockchip/atf.c
> >> @@ -173,7 +173,7 @@ static void rockchip_atf_load_bl31(void *fdt)
> >>         unsigned long bl31_ep;
> >>
> >>         mmu_early_enable(membase[0], memsize[0]);
> >> -       pbl_malloc_init(membase[0] + memsize[0] - PBL_MALLOC_SIZE, PBL_MALLOC_SIZE);
> >> +       pbl_malloc_init(membase[0], memsize[0]);
> >>
> >>         bl31_ep = load_elf64_image_phdr(&bl31);
> >>
> >> --
> >> 2.47.3
> >>
> >
>
> --
> Pengutronix e.K.                  |                             |
> Steuerwalder Str. 21              | http://www.pengutronix.de/  |
> 31137 Hildesheim, Germany         | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686  | Fax:   +49-5121-206917-5555 |
>