Re: [PATCH 0/5] usb: port over some U-Boot fixes

On Fri, 26 Jun 2026 19:31:36 +0200, Ahmad Fatoum wrote:
> A user reported on IRC that the USB keyboard fails to enumerate on an
> MNT Pocket Reform, unless the laptop's power cable is connected.
> 
> This series collects a number of potential fixes for this issue.
> 
> Ahmad Fatoum (5):
>   usb: hub: wait after port reset recovery
>   usb: wait after initial device descriptor read
>   usb: wait after setting device configuration
>   usb: separate descriptor and config requests
>   usb: hub: tolerate transient disconnects during reset
> 
> [...]

Applied, thanks!

[1/5] usb: hub: wait after port reset recovery
      https://git.pengutronix.de/cgit/barebox/commit/?id=200c346c0678 (link may not be stable)
[2/5] usb: wait after initial device descriptor read
      https://git.pengutronix.de/cgit/barebox/commit/?id=2faa49a59e93 (link may not be stable)
[3/5] usb: wait after setting device configuration
      https://git.pengutronix.de/cgit/barebox/commit/?id=ec11da95a7ae (link may not be stable)
[4/5] usb: separate descriptor and config requests
      https://git.pengutronix.de/cgit/barebox/commit/?id=3efa0bef0621 (link may not be stable)
[5/5] usb: hub: tolerate transient disconnects during reset
      https://git.pengutronix.de/cgit/barebox/commit/?id=058cb900e304 (link may not be stable)

Best regards,
-- 
Sascha Hauer <[email protected]>