Re: [PATCH 03/19] ARM: dts: add barebox device tree for Netgear RN102

On 2026-07-23 15:57, Luca Lauro via B4 Relay wrote:
> From: Luca Lauro <[email protected]>
>=20
> ---
>  arch/arm/dts/Makefile                |  1 +
>  arch/arm/dts/armada-370-rn102-bb.dts | 13 +++++++++++++
>  2 files changed, 14 insertions(+)
>=20
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index a84e09e388..5d1b21b615 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -51,6 +51,7 @@ lwl-$(CONFIG_MACH_MARVELL_ARMADA_XP_GP) +=3D armada-xp-=
gp-bb.dtb.o
>  lwl-$(CONFIG_MACH_MARVELL_ARMADA_XP_DB) +=3D armada-xp-db-bb.dtb.o
>  lwl-$(CONFIG_MACH_MX28EVK) +=3D imx28-evk.dtb.o
>  lwl-$(CONFIG_MACH_MYIRTECH_X335X) +=3D am335x-myirtech-myd.dtb.o am335x-=
myirtech-myd-mlo.dtb.o
> +lwl-$(CONFIG_MACH_NETGEAR_RN102) +=3D armada-370-rn102-bb.dtb.o
>  lwl-$(CONFIG_MACH_NETGEAR_RN104) +=3D armada-370-rn104-bb.dtb.o
>  lwl-$(CONFIG_MACH_NETGEAR_RN2120) +=3D armada-xp-rn2120-bb.dtb.o
>  lwl-$(CONFIG_MACH_NITROGEN6) +=3D imx6q-nitrogen6x.dtb.o imx6dl-nitrogen=
6x.dtb.o imx6qp-nitrogen6_max.dtb.o
> diff --git a/arch/arm/dts/armada-370-rn102-bb.dts b/arch/arm/dts/armada-3=
70-rn102-bb.dts
> new file mode 100644
> index 0000000000..0ade2cdd4e
> --- /dev/null
> +++ b/arch/arm/dts/armada-370-rn102-bb.dts
> @@ -0,0 +1,13 @@
> +/*
> + * Barebox specific DT overlay for Netgear ReadyNAS 102
> + */
> +
> +#include "arm/marvell/armada-370-netgear-rn102.dts"
> +
> +/ {
> +	barebox,disable-deep-probe;

Why? Would be worth fixing this issue. Might be because you use
different initcall levels in your board code.

Sascha

--
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |