Re: [PATCH v6 4/8] mfd: khadas-mcu: Add support for VIM4 MCU variant

On 5/27/26 4:53 PM, Lee Jones wrote:
> On Sat, 16 May 2026, Ronald Claveau via B4 Relay wrote:
> 
>> From: Ronald Claveau <[email protected]>
>>
>> Refactor probe() to use per-variant khadas_mcu_data
>> instead of hardcoded globals.
>>
>> Add dedicated regmap configuration and device data for the VIM4 MCU,
>> with its own volatile/writeable registers.
>>
>> Add the fan control register
>> (0–100 levels vs 0–3 for previous supported boards).
>>
>> Add a new compatible string "khadas,vim4-mcu".
>>
>> Reviewed-by: Neil Armstrong <[email protected]>
>> Signed-off-by: Ronald Claveau <[email protected]>
>> ---
>>  drivers/mfd/khadas-mcu.c | 119 +++++++++++++++++++++++++++++++++++++++++------
>>  1 file changed, 104 insertions(+), 15 deletions(-)
>>
>> diff --git a/drivers/mfd/khadas-mcu.c b/drivers/mfd/khadas-mcu.c
>> index ba981a7886921..7bc538232a445 100644
>> --- a/drivers/mfd/khadas-mcu.c
>> +++ b/drivers/mfd/khadas-mcu.c
>> @@ -75,15 +75,91 @@ static const struct regmap_config khadas_mcu_regmap_config = {
>>  	.cache_type	= REGCACHE_MAPLE,
>>  };
>>  
>> -static struct mfd_cell khadas_mcu_fan_cells[] = {
>> +static const struct khadas_mcu_fan_pdata khadas_mcu_fan_pdata = {
>> +	.fan_reg	= KHADAS_MCU_CMD_FAN_STATUS_CTRL_REG,
>> +	.max_level	= 3, /* Fan speed: 0 = off, 1 = low, 2 = medium, 3 = high */
>> +};
>> +
>> +static const struct mfd_cell khadas_mcu_fan_cells[] = {
>>  	/* VIM1/2 Rev13+ and VIM3 only */
>> -	{ .name = "khadas-mcu-fan-ctrl", },
>> +	{
>> +		.name = "khadas-mcu-fan-ctrl",
>> +		.platform_data = &khadas_mcu_fan_pdata,
>> +		.pdata_size    = sizeof(khadas_mcu_fan_pdata),
>> +	},
>>  };
>>  
>> -static struct mfd_cell khadas_mcu_cells[] = {
>> +static const struct mfd_cell khadas_mcu_cells[] = {
>>  	{ .name = "khadas-mcu-user-mem", },
>>  };
>>  
>> +static const struct khadas_mcu_data khadas_mcu_data = {
>> +	.regmap_config	= &khadas_mcu_regmap_config,
>> +	.cells		= khadas_mcu_cells,
>> +	.ncells		= ARRAY_SIZE(khadas_mcu_cells),
>> +	.fan_cells	= khadas_mcu_fan_cells,
>> +	.nfan_cells	= ARRAY_SIZE(khadas_mcu_fan_cells),
>> +};
> 
> Let's not over-complicate things please.
> 
> You can do all of this with local variables inside khadas_mcu_probe()
> and omit the terribly named khadas_mcu_data structure entirely.
> 

Ok thanks, I will send a new version according to your feedback.

>> +static bool khadas_mcu_vim4_reg_volatile(struct device *dev, unsigned int reg)
>> +{
>> +	switch (reg) {
>> +	case KHADAS_MCU_PWR_OFF_CMD_REG:
>> +	case KHADAS_MCU_VIM4_REST_CONF_REG:
>> +	case KHADAS_MCU_WOL_INIT_START_REG:
>> +	case KHADAS_MCU_VIM4_LED_ON_RAM_REG:
>> +	case KHADAS_MCU_VIM4_FAN_CTRL_REG:
>> +	case KHADAS_MCU_VIM4_WDT_EN_REG:
>> +	case KHADAS_MCU_VIM4_SYS_RST_REG:
>> +		return true;
>> +	default:
>> +		return false;
>> +	}
>> +}
>> +
>> +static bool khadas_mcu_vim4_reg_writeable(struct device *dev, unsigned int reg)
>> +{
>> +	switch (reg) {
>> +	case KHADAS_MCU_VERSION_0_REG:
>> +	case KHADAS_MCU_VERSION_1_REG:
>> +	case KHADAS_MCU_SHUTDOWN_NORMAL_STATUS_REG:
>> +		return false;
>> +	default:
>> +		return true;
>> +	}
>> +}
>> +
>> +static const struct regmap_config khadas_mcu_vim4_regmap_config = {
>> +	.reg_bits	= 8,
>> +	.reg_stride	= 1,
>> +	.val_bits	= 8,
>> +	.max_register	= KHADAS_MCU_VIM4_SYS_RST_REG,
>> +	.volatile_reg	= khadas_mcu_vim4_reg_volatile,
>> +	.writeable_reg	= khadas_mcu_vim4_reg_writeable,
>> +	.cache_type	= REGCACHE_MAPLE,
>> +};
>> +
>> +static const struct khadas_mcu_fan_pdata khadas_vim4_fan_pdata = {
>> +	.fan_reg	= KHADAS_MCU_VIM4_FAN_CTRL_REG,
>> +	.max_level	= 0x64,
>> +};
>> +
>> +static const struct mfd_cell khadas_mcu_vim4_cells[] = {
>> +	{
>> +		.name		= "khadas-mcu-fan-ctrl",
>> +		.platform_data	= &khadas_vim4_fan_pdata,
>> +		.pdata_size	= sizeof(khadas_vim4_fan_pdata),
>> +	},
>> +};
>> +
>> +static const struct khadas_mcu_data khadas_vim4_mcu_data = {
>> +	.regmap_config	= &khadas_mcu_vim4_regmap_config,
>> +	.cells		= NULL,
>> +	.ncells		= 0,
>> +	.fan_cells	= khadas_mcu_vim4_cells,
>> +	.nfan_cells	= ARRAY_SIZE(khadas_mcu_vim4_cells),
>> +};
>> +
>>  static int khadas_mcu_probe(struct i2c_client *client)
>>  {
>>  	struct device *dev = &client->dev;
>> @@ -94,28 +170,40 @@ static int khadas_mcu_probe(struct i2c_client *client)
>>  	if (!ddata)
>>  		return -ENOMEM;
>>  
>> +	switch ((uintptr_t)i2c_get_match_data(client)) {
>> +	case KHADAS_MCU_GENERIC:
>> +		ddata->data = &khadas_mcu_data;
>> +		break;
>> +	case KHADAS_MCU_VIM4:
>> +		ddata->data = &khadas_vim4_mcu_data;
>> +		break;
>> +	default:
>> +		return -ENODEV;
>> +	}
>> +
>>  	i2c_set_clientdata(client, ddata);
>>  
>>  	ddata->dev = dev;
>>  
>> -	ddata->regmap = devm_regmap_init_i2c(client, &khadas_mcu_regmap_config);
>> +	ddata->regmap = devm_regmap_init_i2c(client, ddata->data->regmap_config);
>>  	if (IS_ERR(ddata->regmap)) {
>>  		ret = PTR_ERR(ddata->regmap);
>> -		dev_err(dev, "Failed to allocate register map: %d\n", ret);
>> -		return ret;
>> +		return dev_err_probe(dev, ret, "Failed to allocate register map\n");
>>  	}
>>  
>> -	ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
>> -				   khadas_mcu_cells,
>> -				   ARRAY_SIZE(khadas_mcu_cells),
>> -				   NULL, 0, NULL);
>> -	if (ret)
>> -		return ret;
>> +	if (ddata->data->cells && ddata->data->ncells) {
>> +		ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
>> +					   ddata->data->cells,
>> +					   ddata->data->ncells,
>> +					   NULL, 0, NULL);
>> +		if (ret)
>> +			return ret;
>> +	}
>>  
>>  	if (of_property_present(dev->of_node, "#cooling-cells"))
>>  		return devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
>> -					    khadas_mcu_fan_cells,
>> -					    ARRAY_SIZE(khadas_mcu_fan_cells),
>> +					    ddata->data->fan_cells,
>> +					    ddata->data->nfan_cells,
>>  					    NULL, 0, NULL);
>>  
>>  	return 0;
>> @@ -123,7 +211,8 @@ static int khadas_mcu_probe(struct i2c_client *client)
>>  
>>  #ifdef CONFIG_OF
>>  static const struct of_device_id khadas_mcu_of_match[] = {
>> -	{ .compatible = "khadas,mcu", },
>> +	{ .compatible = "khadas,mcu", .data = (void *)KHADAS_MCU_GENERIC },
>> +	{ .compatible = "khadas,vim4-mcu", .data = (void *)KHADAS_MCU_VIM4 },
>>  	{},
>>  };
>>  MODULE_DEVICE_TABLE(of, khadas_mcu_of_match);
>>
>> -- 
>> 2.49.0
>>
>>
> 


-- 
Best regards,
Ronald

_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic