Re: [PATCH v3 2/2] clk: amlogic: Add A9 AO clock controller driver

Jerome Brunet <[email protected]>
Newsgroups org.infradead.lists.linux-amlogic,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-clk,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel
Message-ID <[email protected]>
On mer. 10 juin 2026 at 16:23, Jian Hu via B4 Relay <[email protected]> wrote:

> From: Jian Hu <[email protected]>
>
> Add the Always-on clock controller driver for the Amlogic A9 SoC family.
>
> Signed-off-by: Jian Hu <[email protected]>
> ---
>  drivers/clk/meson/Kconfig    |  13 ++
>  drivers/clk/meson/Makefile   |   1 +
>  drivers/clk/meson/a9-aoclk.c | 431 +++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 445 insertions(+)
>
> diff --git a/drivers/clk/meson/Kconfig b/drivers/clk/meson/Kconfig
> index cf8cf3f9e4ee..b71299898197 100644
> --- a/drivers/clk/meson/Kconfig
> +++ b/drivers/clk/meson/Kconfig
> @@ -132,6 +132,19 @@ config COMMON_CLK_A1_PERIPHERALS
>  	  device, A1 SoC Family. Say Y if you want A1 Peripherals clock
>  	  controller to work.
>  
> +config COMMON_CLK_A9_AO
> +	tristate "Amlogic A9 SoC AO clock controller support"
> +	depends on ARM64 || COMPILE_TEST
> +	default ARCH_MESON
> +	select COMMON_CLK_MESON_REGMAP
> +	select COMMON_CLK_MESON_CLKC_UTILS
> +	select COMMON_CLK_MESON_DUALDIV
> +	imply COMMON_CLK_SCMI
> +	help
> +	  Support for the AO clock controller on Amlogic A311Y3 based
> +	  device, AKA A9.
> +	  Say Y if you want A9 AO clock controller to work.
> +
>  config COMMON_CLK_C3_PLL
>  	tristate "Amlogic C3 PLL clock controller"
>  	depends on ARM64
> diff --git a/drivers/clk/meson/Makefile b/drivers/clk/meson/Makefile
> index c6719694a242..f89d027c282c 100644
> --- a/drivers/clk/meson/Makefile
> +++ b/drivers/clk/meson/Makefile
> @@ -19,6 +19,7 @@ obj-$(CONFIG_COMMON_CLK_AXG) += axg.o axg-aoclk.o
>  obj-$(CONFIG_COMMON_CLK_AXG_AUDIO) += axg-audio.o
>  obj-$(CONFIG_COMMON_CLK_A1_PLL) += a1-pll.o
>  obj-$(CONFIG_COMMON_CLK_A1_PERIPHERALS) += a1-peripherals.o
> +obj-$(CONFIG_COMMON_CLK_A9_AO) += a9-aoclk.o
>  obj-$(CONFIG_COMMON_CLK_C3_PLL) += c3-pll.o
>  obj-$(CONFIG_COMMON_CLK_C3_PERIPHERALS) += c3-peripherals.o
>  obj-$(CONFIG_COMMON_CLK_GXBB) += gxbb.o gxbb-aoclk.o
> diff --git a/drivers/clk/meson/a9-aoclk.c b/drivers/clk/meson/a9-aoclk.c
> new file mode 100644
> index 000000000000..dd9fd8d24702
> --- /dev/null
> +++ b/drivers/clk/meson/a9-aoclk.c
> @@ -0,0 +1,431 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
> +/*
> + * Copyright (C) 2026 Amlogic, Inc. All rights reserved
> + */
> +
> +#include <dt-bindings/clock/amlogic,a9-aoclkc.h>
> +#include <linux/clk-provider.h>
> +#include <linux/platform_device.h>
> +#include "clk-regmap.h"
> +#include "clk-dualdiv.h"
> +#include "meson-clkc-utils.h"
> +
> +#define AO_OSCIN_CTRL			0x00
> +#define AO_SYS_CLK0			0x04
> +#define AO_PWM_CLK_A_CTRL		0x1c
> +#define AO_PWM_CLK_B_CTRL		0x20
> +#define AO_PWM_CLK_C_CTRL		0x24
> +#define AO_PWM_CLK_D_CTRL		0x28
> +#define AO_PWM_CLK_E_CTRL		0x2c
> +#define AO_PWM_CLK_F_CTRL		0x30
> +#define AO_PWM_CLK_G_CTRL		0x34
> +#define AO_CEC_CTRL0			0x38
> +#define AO_CEC_CTRL1			0x3c
> +#define AO_RTC_BY_OSCIN_CTRL0		0x50
> +#define AO_RTC_BY_OSCIN_CTRL1		0x54
> +
> +#define A9_COMP_SEL(_name, _reg, _shift, _mask, _pdata) \
> +	MESON_COMP_SEL(a9_ao_, _name, _reg, _shift, _mask, _pdata, NULL, 0, 0)
> +
> +#define A9_COMP_DIV(_name, _reg, _shift, _width) \
> +	MESON_COMP_DIV(a9_ao_, _name, _reg, _shift, _width, 0, CLK_SET_RATE_PARENT)
> +
> +#define A9_COMP_GATE(_name, _reg, _bit) \
> +	MESON_COMP_GATE(a9_ao_, _name, _reg, _bit, CLK_SET_RATE_PARENT)
> +
> +static struct clk_regmap a9_ao_xtal_in = {
> +	.data = &(struct clk_regmap_gate_data){
> +		.offset = AO_OSCIN_CTRL,
> +		.bit_idx = 3,
> +	},
> +	.hw.init = &(struct clk_init_data) {
> +		.name = "ao_xtal_in",
> +		.ops = &clk_regmap_gate_ops,
> +		.parent_data = &(const struct clk_parent_data) {
> +			.fw_name = "xtal",
> +		},
> +		.num_parents = 1,
> +		/*
> +		 * ao_sys can select different clock sources. One possible clock path is:
> +		 *   ao_xtal_in->ao_xtal->ao_sys-> ao sys gate clocks
> +		 *
> +		 * ao_xtal_in is in the parent chain of AO sys gate clocks.
> +		 * Since some downstream clocks are marked CLK_IS_CRITICAL,
> +		 * ao_xtal_in must remain enabled and is therefore marked
> +		 * CLK_IS_CRITICAL as well.
> +		 */
> +		.flags = CLK_IS_CRITICAL,

Please allow some time for me to reply before reposting.
See my answer on v2.


> +	},
> +};
> +
> +static struct clk_regmap a9_ao_xtal = {
> +	.data = &(struct clk_regmap_mux_data) {
> +		.offset = AO_OSCIN_CTRL,
> +		.mask = 0x1,
> +		.shift = 0,
> +	},
> +	/* ext_32k is from external PAD, do not automatically reparent */
> +	.hw.init = CLK_HW_INIT_PARENTS_DATA("ao_xtal",
> +			((const struct clk_parent_data []) {
> +				{ .hw = &a9_ao_xtal_in.hw },
> +				{ .fw_name = "ext_32k" }
> +			}), &clk_regmap_mux_ops, CLK_SET_RATE_NO_REPARENT),

I hope my view on this is clear as well.
Let me know if it isn't 


> +};
> +
> +static struct clk_regmap a9_ao_sys = {
> +	.data = &(struct clk_regmap_mux_data) {
> +		.offset = AO_OSCIN_CTRL,
> +		.mask = 0x1,
> +		.shift = 1,
> +	},
> +	.hw.init = CLK_HW_INIT_PARENTS_DATA("ao_sys",
> +			((const struct clk_parent_data []) {
> +				{ .hw = &a9_ao_xtal.hw },
> +				{ .fw_name = "sys" }
> +			}), &clk_regmap_mux_ops, 0),
> +};
> +
> +static const struct clk_parent_data a9_ao_pclk_parents = { .hw = &a9_ao_sys.hw };
> +
> +#define A9_AO_PCLK(_name, _bit, _flags)		       \
> +	MESON_PCLK(a9_ao_sys_##_name, AO_SYS_CLK0, _bit, \
> +		   &a9_ao_pclk_parents, _flags)
> +
> +/*
> + * A9 integrates a low-power microprocessor (Always-on CPU: AOCPU). Some AO sys
> + * clocks control the AOCPU modules. Mark the AOCPU-related clocks with
> + * CLK_IS_CRITICAL to avoid them being disabled and impacting AOCPU functionality.
> + * AOCPU-related clocks list:
> + * - clktree
> + * - rst_ctrl
> + * - pad
> + * - irq
> + * - pwrctrl
> + * - aocpu
> + * - sram
> + */
> +static A9_AO_PCLK(i3c,		0,	0);
> +static A9_AO_PCLK(rtc_reg,	1,	0);
> +static A9_AO_PCLK(clktree,	2,	CLK_IS_CRITICAL);
> +static A9_AO_PCLK(rst_ctrl,	3,	CLK_IS_CRITICAL);
> +static A9_AO_PCLK(pad,		4,	CLK_IS_CRITICAL);
> +static A9_AO_PCLK(rtc_dig,	5,	0);
> +static A9_AO_PCLK(irq,		6,	CLK_IS_CRITICAL);
> +static A9_AO_PCLK(pwrctrl,	7,	CLK_IS_CRITICAL);
> +static A9_AO_PCLK(pwm_a,	8,	0);
> +static A9_AO_PCLK(pwm_b,	9,	0);
> +static A9_AO_PCLK(pwm_c,	10,	0);
> +static A9_AO_PCLK(pwm_d,	11,	0);
> +static A9_AO_PCLK(pwm_e,	12,	0);
> +static A9_AO_PCLK(pwm_f,	13,	0);
> +static A9_AO_PCLK(pwm_g,	14,	0);
> +static A9_AO_PCLK(i2c_a,	15,	0);
> +static A9_AO_PCLK(i2c_b,	16,	0);
> +static A9_AO_PCLK(i2c_c,	17,	0);
> +static A9_AO_PCLK(i2c_d,	18,	0);
> +static A9_AO_PCLK(sed,		19,	0);
> +static A9_AO_PCLK(ir_ctrl,	20,	0);
> +static A9_AO_PCLK(uart_b,	21,	0);
> +static A9_AO_PCLK(uart_c,	22,	0);
> +static A9_AO_PCLK(uart_d,	23,	0);
> +static A9_AO_PCLK(uart_e,	24,	0);
> +static A9_AO_PCLK(spisg_0,	25,	0);
> +static A9_AO_PCLK(rtc_secure,	26,	0);
> +static A9_AO_PCLK(cec,		27,	0);
> +static A9_AO_PCLK(aocpu,	28,	CLK_IS_CRITICAL);
> +static A9_AO_PCLK(sram,		29,	CLK_IS_CRITICAL);
> +static A9_AO_PCLK(spisg_1,	30,	0);
> +static A9_AO_PCLK(spisg_2,	31,	0);
> +
> +static const struct clk_parent_data a9_ao_pwm_parents[] = {
> +	{ .hw = &a9_ao_xtal.hw },
> +	{ .fw_name = "fdiv5", },
> +	{ .fw_name = "fdiv4", },
> +	{ .fw_name = "fdiv3", }
> +};
> +
> +static A9_COMP_SEL(pwm_a, AO_PWM_CLK_A_CTRL, 9, 0x7, a9_ao_pwm_parents);
> +static A9_COMP_DIV(pwm_a, AO_PWM_CLK_A_CTRL, 0, 8);
> +static A9_COMP_GATE(pwm_a, AO_PWM_CLK_A_CTRL, 8);
> +
> +static A9_COMP_SEL(pwm_b, AO_PWM_CLK_B_CTRL, 9, 0x7, a9_ao_pwm_parents);
> +static A9_COMP_DIV(pwm_b, AO_PWM_CLK_B_CTRL, 0, 8);
> +static A9_COMP_GATE(pwm_b, AO_PWM_CLK_B_CTRL, 8);
> +
> +static A9_COMP_SEL(pwm_c, AO_PWM_CLK_C_CTRL, 9, 0x7, a9_ao_pwm_parents);
> +static A9_COMP_DIV(pwm_c, AO_PWM_CLK_C_CTRL, 0, 8);
> +static A9_COMP_GATE(pwm_c, AO_PWM_CLK_C_CTRL, 8);
> +
> +static A9_COMP_SEL(pwm_d, AO_PWM_CLK_D_CTRL, 9, 0x7, a9_ao_pwm_parents);
> +static A9_COMP_DIV(pwm_d, AO_PWM_CLK_D_CTRL, 0, 8);
> +static A9_COMP_GATE(pwm_d, AO_PWM_CLK_D_CTRL, 8);
> +
> +static A9_COMP_SEL(pwm_e, AO_PWM_CLK_E_CTRL, 9, 0x7, a9_ao_pwm_parents);
> +static A9_COMP_DIV(pwm_e, AO_PWM_CLK_E_CTRL, 0, 8);
> +static A9_COMP_GATE(pwm_e, AO_PWM_CLK_E_CTRL, 8);
> +
> +static A9_COMP_SEL(pwm_f, AO_PWM_CLK_F_CTRL, 9, 0x7, a9_ao_pwm_parents);
> +static A9_COMP_DIV(pwm_f, AO_PWM_CLK_F_CTRL, 0, 8);
> +static A9_COMP_GATE(pwm_f, AO_PWM_CLK_F_CTRL, 8);
> +
> +static A9_COMP_SEL(pwm_g, AO_PWM_CLK_G_CTRL, 9, 0x7, a9_ao_pwm_parents);
> +static A9_COMP_DIV(pwm_g, AO_PWM_CLK_G_CTRL, 0, 8);
> +static A9_COMP_GATE(pwm_g, AO_PWM_CLK_G_CTRL, 8);
> +
> +static struct clk_regmap a9_ao_rtc_dualdiv_in = {
> +	.data = &(struct clk_regmap_gate_data){
> +		.offset = AO_RTC_BY_OSCIN_CTRL0,
> +		.bit_idx = 31,
> +	},
> +	.hw.init = CLK_HW_INIT_HW("ao_rtc_dualdiv_in", &a9_ao_xtal.hw,
> +				   &clk_regmap_gate_ops, 0),
> +};
> +
> +static const struct meson_clk_dualdiv_param a9_ao_dualdiv_table[] = {
> +	{ 733, 732, 8, 11, 1 },
> +	{ /* sentinel */ }
> +};
> +
> +static struct clk_regmap a9_ao_rtc_dualdiv_div = {
> +	.data = &(struct meson_clk_dualdiv_data){
> +		.n1 = {
> +			.reg_off = AO_RTC_BY_OSCIN_CTRL0,
> +			.shift   = 0,
> +			.width   = 12,
> +		},
> +		.n2 = {
> +			.reg_off = AO_RTC_BY_OSCIN_CTRL0,
> +			.shift   = 12,
> +			.width   = 12,
> +		},
> +		.m1 = {
> +			.reg_off = AO_RTC_BY_OSCIN_CTRL1,
> +			.shift   = 0,
> +			.width   = 12,
> +		},
> +		.m2 = {
> +			.reg_off = AO_RTC_BY_OSCIN_CTRL1,
> +			.shift   = 12,
> +			.width   = 12,
> +		},
> +		.dual = {
> +			.reg_off = AO_RTC_BY_OSCIN_CTRL0,
> +			.shift   = 28,
> +			.width   = 1,
> +		},
> +		.table = a9_ao_dualdiv_table,
> +	},
> +	.hw.init = CLK_HW_INIT_HW("a9_ao_rtc_dualdiv_div", &a9_ao_rtc_dualdiv_in.hw,
> +				   &meson_clk_dualdiv_ops, 0),
> +};
> +
> +static struct clk_regmap a9_ao_rtc_dualdiv_sel = {
> +	.data = &(struct clk_regmap_mux_data) {
> +		.offset = AO_RTC_BY_OSCIN_CTRL1,
> +		.mask = 0x1,
> +		.shift = 24,
> +	},
> +	.hw.init = CLK_HW_INIT_PARENTS_HW("ao_rtc_dualdiv_sel",
> +			((const struct clk_hw *[]) {
> +				&a9_ao_rtc_dualdiv_div.hw,
> +				&a9_ao_rtc_dualdiv_in.hw,
> +			}), &clk_regmap_mux_ops, CLK_SET_RATE_PARENT),
> +};
> +
> +static struct clk_regmap a9_ao_rtc_dualdiv = {
> +	.data = &(struct clk_regmap_gate_data){
> +		.offset = AO_RTC_BY_OSCIN_CTRL0,
> +		.bit_idx = 30,
> +	},
> +	.hw.init = CLK_HW_INIT_HW("ao_rtc_dualdiv", &a9_ao_rtc_dualdiv_sel.hw,
> +				   &clk_regmap_gate_ops, CLK_SET_RATE_PARENT),
> +};
> +
> +static struct clk_regmap a9_ao_rtc = {
> +	.data = &(struct clk_regmap_mux_data) {
> +		.offset = AO_RTC_BY_OSCIN_CTRL1,
> +		.mask = 0x1,
> +		.shift = 30,
> +	},
> +	.hw.init = CLK_HW_INIT_PARENTS_HW("ao_rtc",
> +			((const struct clk_hw *[]) {
> +				&a9_ao_xtal.hw,
> +				&a9_ao_rtc_dualdiv.hw,
> +			}), &clk_regmap_mux_ops, CLK_SET_RATE_PARENT),
> +};
> +
> +static struct clk_regmap a9_ao_cec_dualdiv_in = {
> +	.data = &(struct clk_regmap_gate_data){
> +		.offset = AO_CEC_CTRL0,
> +		.bit_idx = 31,
> +	},
> +	.hw.init = CLK_HW_INIT_HW("ao_cec_dualdiv_in", &a9_ao_xtal.hw,
> +				   &clk_regmap_gate_ops, 0),
> +};
> +
> +static struct clk_regmap a9_ao_cec_dualdiv_div = {
> +	.data = &(struct meson_clk_dualdiv_data){
> +		.n1 = {
> +			.reg_off = AO_CEC_CTRL0,
> +			.shift   = 0,
> +			.width   = 12,
> +		},
> +		.n2 = {
> +			.reg_off = AO_CEC_CTRL0,
> +			.shift   = 12,
> +			.width   = 12,
> +		},
> +		.m1 = {
> +			.reg_off = AO_CEC_CTRL1,
> +			.shift   = 0,
> +			.width   = 12,
> +		},
> +		.m2 = {
> +			.reg_off = AO_CEC_CTRL1,
> +			.shift   = 12,
> +			.width   = 12,
> +		},
> +		.dual = {
> +			.reg_off = AO_CEC_CTRL0,
> +			.shift   = 28,
> +			.width   = 1,
> +		},
> +		.table = a9_ao_dualdiv_table,
> +	},
> +	.hw.init = CLK_HW_INIT_HW("ao_cec_dualdiv_div", &a9_ao_cec_dualdiv_in.hw,
> +				   &meson_clk_dualdiv_ops, 0),
> +};
> +
> +static struct clk_regmap a9_ao_cec_dualdiv_sel = {
> +	.data = &(struct clk_regmap_mux_data) {
> +		.offset = AO_CEC_CTRL1,
> +		.mask = 0x1,
> +		.shift = 24,
> +	},
> +	.hw.init = CLK_HW_INIT_PARENTS_HW("ao_cec_dualdiv_sel",
> +			((const struct clk_hw *[]) {
> +				&a9_ao_cec_dualdiv_div.hw,
> +				&a9_ao_cec_dualdiv_in.hw,
> +			}), &clk_regmap_mux_ops, CLK_SET_RATE_PARENT),
> +};
> +
> +static struct clk_regmap a9_ao_cec_dualdiv = {
> +	.data = &(struct clk_regmap_gate_data){
> +		.offset = AO_CEC_CTRL0,
> +		.bit_idx = 30,
> +	},
> +	.hw.init = CLK_HW_INIT_HW("ao_cec_dualdiv", &a9_ao_cec_dualdiv_sel.hw,
> +				   &clk_regmap_gate_ops, CLK_SET_RATE_PARENT),
> +};
> +
> +static struct clk_regmap a9_ao_cec = {
> +	.data = &(struct clk_regmap_mux_data) {
> +		.offset = AO_CEC_CTRL1,
> +		.mask = 0x1,
> +		.shift = 30,
> +	},
> +	.hw.init = CLK_HW_INIT_PARENTS_HW("ao_cec",
> +			((const struct clk_hw *[]) {
> +				&a9_ao_cec_dualdiv.hw,
> +				&a9_ao_rtc.hw,
> +			}), &clk_regmap_mux_ops, CLK_SET_RATE_PARENT),
> +};
> +
> +static struct clk_hw *a9_ao_hw_clks[] = {
> +	[CLKID_AO_XTAL_IN]		= &a9_ao_xtal_in.hw,
> +	[CLKID_AO_XTAL]			= &a9_ao_xtal.hw,
> +	[CLKID_AO_SYS]			= &a9_ao_sys.hw,
> +	[CLKID_AO_SYS_I3C]		= &a9_ao_sys_i3c.hw,
> +	[CLKID_AO_SYS_RTC_REG]		= &a9_ao_sys_rtc_reg.hw,
> +	[CLKID_AO_SYS_CLKTREE]		= &a9_ao_sys_clktree.hw,
> +	[CLKID_AO_SYS_RST_CTRL]		= &a9_ao_sys_rst_ctrl.hw,
> +	[CLKID_AO_SYS_PAD]		= &a9_ao_sys_pad.hw,
> +	[CLKID_AO_SYS_RTC_DIG]		= &a9_ao_sys_rtc_dig.hw,
> +	[CLKID_AO_SYS_IRQ]		= &a9_ao_sys_irq.hw,
> +	[CLKID_AO_SYS_PWRCTRL]		= &a9_ao_sys_pwrctrl.hw,
> +	[CLKID_AO_SYS_PWM_A]		= &a9_ao_sys_pwm_a.hw,
> +	[CLKID_AO_SYS_PWM_B]		= &a9_ao_sys_pwm_b.hw,
> +	[CLKID_AO_SYS_PWM_C]		= &a9_ao_sys_pwm_c.hw,
> +	[CLKID_AO_SYS_PWM_D]		= &a9_ao_sys_pwm_d.hw,
> +	[CLKID_AO_SYS_PWM_E]		= &a9_ao_sys_pwm_e.hw,
> +	[CLKID_AO_SYS_PWM_F]		= &a9_ao_sys_pwm_f.hw,
> +	[CLKID_AO_SYS_PWM_G]		= &a9_ao_sys_pwm_g.hw,
> +	[CLKID_AO_SYS_I2C_A]		= &a9_ao_sys_i2c_a.hw,
> +	[CLKID_AO_SYS_I2C_B]		= &a9_ao_sys_i2c_b.hw,
> +	[CLKID_AO_SYS_I2C_C]		= &a9_ao_sys_i2c_c.hw,
> +	[CLKID_AO_SYS_I2C_D]		= &a9_ao_sys_i2c_d.hw,
> +	[CLKID_AO_SYS_SED]		= &a9_ao_sys_sed.hw,
> +	[CLKID_AO_SYS_IR_CTRL]		= &a9_ao_sys_ir_ctrl.hw,
> +	[CLKID_AO_SYS_UART_B]		= &a9_ao_sys_uart_b.hw,
> +	[CLKID_AO_SYS_UART_C]		= &a9_ao_sys_uart_c.hw,
> +	[CLKID_AO_SYS_UART_D]		= &a9_ao_sys_uart_d.hw,
> +	[CLKID_AO_SYS_UART_E]		= &a9_ao_sys_uart_e.hw,
> +	[CLKID_AO_SYS_SPISG_0]		= &a9_ao_sys_spisg_0.hw,
> +	[CLKID_AO_SYS_RTC_SECURE]	= &a9_ao_sys_rtc_secure.hw,
> +	[CLKID_AO_SYS_CEC]		= &a9_ao_sys_cec.hw,
> +	[CLKID_AO_SYS_AOCPU]		= &a9_ao_sys_aocpu.hw,
> +	[CLKID_AO_SYS_SRAM]		= &a9_ao_sys_sram.hw,
> +	[CLKID_AO_SYS_SPISG_1]		= &a9_ao_sys_spisg_1.hw,
> +	[CLKID_AO_SYS_SPISG_2]		= &a9_ao_sys_spisg_2.hw,
> +	[CLKID_AO_PWM_A_SEL]		= &a9_ao_pwm_a_sel.hw,
> +	[CLKID_AO_PWM_A_DIV]		= &a9_ao_pwm_a_div.hw,
> +	[CLKID_AO_PWM_A]		= &a9_ao_pwm_a.hw,
> +	[CLKID_AO_PWM_B_SEL]		= &a9_ao_pwm_b_sel.hw,
> +	[CLKID_AO_PWM_B_DIV]		= &a9_ao_pwm_b_div.hw,
> +	[CLKID_AO_PWM_B]		= &a9_ao_pwm_b.hw,
> +	[CLKID_AO_PWM_C_SEL]		= &a9_ao_pwm_c_sel.hw,
> +	[CLKID_AO_PWM_C_DIV]		= &a9_ao_pwm_c_div.hw,
> +	[CLKID_AO_PWM_C]		= &a9_ao_pwm_c.hw,
> +	[CLKID_AO_PWM_D_SEL]		= &a9_ao_pwm_d_sel.hw,
> +	[CLKID_AO_PWM_D_DIV]		= &a9_ao_pwm_d_div.hw,
> +	[CLKID_AO_PWM_D]		= &a9_ao_pwm_d.hw,
> +	[CLKID_AO_PWM_E_SEL]		= &a9_ao_pwm_e_sel.hw,
> +	[CLKID_AO_PWM_E_DIV]		= &a9_ao_pwm_e_div.hw,
> +	[CLKID_AO_PWM_E]		= &a9_ao_pwm_e.hw,
> +	[CLKID_AO_PWM_F_SEL]		= &a9_ao_pwm_f_sel.hw,
> +	[CLKID_AO_PWM_F_DIV]		= &a9_ao_pwm_f_div.hw,
> +	[CLKID_AO_PWM_F]		= &a9_ao_pwm_f.hw,
> +	[CLKID_AO_PWM_G_SEL]		= &a9_ao_pwm_g_sel.hw,
> +	[CLKID_AO_PWM_G_DIV]		= &a9_ao_pwm_g_div.hw,
> +	[CLKID_AO_PWM_G]		= &a9_ao_pwm_g.hw,
> +	[CLKID_AO_RTC_DUALDIV_IN]	= &a9_ao_rtc_dualdiv_in.hw,
> +	[CLKID_AO_RTC_DUALDIV_DIV]	= &a9_ao_rtc_dualdiv_div.hw,
> +	[CLKID_AO_RTC_DUALDIV_SEL]	= &a9_ao_rtc_dualdiv_sel.hw,
> +	[CLKID_AO_RTC_DUALDIV]		= &a9_ao_rtc_dualdiv.hw,
> +	[CLKID_AO_RTC]			= &a9_ao_rtc.hw,
> +	[CLKID_AO_CEC_DUALDIV_IN]	= &a9_ao_cec_dualdiv_in.hw,
> +	[CLKID_AO_CEC_DUALDIV_DIV]	= &a9_ao_cec_dualdiv_div.hw,
> +	[CLKID_AO_CEC_DUALDIV_SEL]	= &a9_ao_cec_dualdiv_sel.hw,
> +	[CLKID_AO_CEC_DUALDIV]		= &a9_ao_cec_dualdiv.hw,
> +	[CLKID_AO_CEC]			= &a9_ao_cec.hw,
> +};
> +
> +static const struct meson_clkc_data a9_ao_clkc_data = {
> +	.hw_clks = {
> +		.hws = a9_ao_hw_clks,
> +		.num = ARRAY_SIZE(a9_ao_hw_clks),
> +	},
> +};
> +
> +static const struct of_device_id a9_ao_clkc_match_table[] = {
> +	{
> +		.compatible	= "amlogic,a9-aoclkc",
> +		.data		= &a9_ao_clkc_data,
> +	},
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, a9_ao_clkc_match_table);
> +
> +static struct platform_driver a9_ao_clkc_driver = {
> +	.probe		= meson_clkc_mmio_probe,
> +	.driver		= {
> +		.name	= "a9-aoclkc",
> +		.of_match_table = a9_ao_clkc_match_table,
> +	},
> +};
> +module_platform_driver(a9_ao_clkc_driver);
> +
> +MODULE_DESCRIPTION("Amlogic A9 Always-ON Clock Controller driver");
> +MODULE_AUTHOR("Jian Hu <[email protected]>");
> +MODULE_LICENSE("GPL");
> +MODULE_IMPORT_NS("CLK_MESON");

-- 
Jerome

_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.