[PATCH 2/2] dt-bindings: thermal: amlogic: Correct 'reg' in the example
Krzysztof Kozlowski <[email protected]>
| Newsgroups | org.infradead.lists.linux-amlogic,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel,org.kernel.vger.linux-pm |
|---|---|
| Message-ID | <[email protected]> |
The example DTS is tested in a wrapped node with address/size-cells=1,
thus reg had incorrect entry leading to dt_binding_check fails:
thermal/amlogic,thermal.example.dtb: temperature-sensor@20000 (amlogic,t7-thermal): reg: [[0, 131072], [0, 80]] is too long
Fixes: b1c8ccdbd4e9 ("dt-bindings: thermal: amlogic: Add support for T7")
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
index d8f7f3eb7ae2..8cfa44dcda58 100644
--- a/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
@@ -92,7 +92,7 @@ examples:
temperature-sensor@20000 {
compatible = "amlogic,t7-thermal";
- reg = <0x0 0x20000 0x0 0x50>;
+ reg = <0x20000 0x50>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkc_periphs CLKID_TS>;
#thermal-sensor-cells = <0>;
--
2.53.0
_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic