[PATCH 4/5] drm/msm/dp: report IRQ_HPD as an IRQ-only notification

MST reuses the SST connector bridge to propagate HPD IRQ events through
the bridge chain.

For IRQ_HPD notifications there is no connector state transition to
report. Use connector_status_unknown together with
DRM_CONNECTOR_DP_IRQ_HPD so that the bridge connector framework treats
them as IRQ-only notifications and forwards them without modifying
connector state.

The DP driver handles IRQ_HPD events based on
DRM_CONNECTOR_DP_IRQ_HPD rather than connector status transitions.

Signed-off-by: Yongxing Mou <[email protected]>
---
 drivers/gpu/drm/msm/dp/dp_display.c   | 22 +++++++++-------------
 drivers/soc/qcom/pmic_glink_altmode.c | 14 +++++++++-----
 2 files changed, 18 insertions(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index bc93b566fbca..4ee391cc7165 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -1119,14 +1119,10 @@ static irqreturn_t msm_dp_display_irq_thread(int irq, void *dev_id)
 		drm_bridge_hpd_notify(dp->msm_dp_display.bridge,
 				      connector_status_connected);
 
-	/* Send HPD as connected and distinguish it in the notifier */
-	if (hpd_isr_status & DP_DP_IRQ_HPD_INT_MASK) {
-		if (dp->msm_dp_display.mst_active)
-			msm_dp_irq_hpd_handle(dp);
-		else
-			drm_bridge_hpd_notify(dp->msm_dp_display.bridge,
-					      connector_status_connected);
-	}
+	if (hpd_isr_status & DP_DP_IRQ_HPD_INT_MASK)
+		drm_bridge_hpd_notify_extra(dp->msm_dp_display.bridge,
+					    connector_status_unknown,
+					    DRM_CONNECTOR_DP_IRQ_HPD);
 
 	ret = IRQ_HANDLED;
 
@@ -1781,11 +1777,11 @@ void msm_dp_bridge_hpd_notify(struct drm_bridge *bridge,
 	drm_dbg_dp(dp->drm_dev, "type=%d link hpd_link_status=0x%x, status=%d\n",
 		   msm_dp_display->connector_type, hpd_link_status, status);
 
-	if (status == connector_status_connected) {
-		if (hpd_link_status == ISR_IRQ_HPD_PULSE_COUNT ||
-		    extra_status == DRM_CONNECTOR_DP_IRQ_HPD) {
-			msm_dp_irq_hpd_handle(dp);
-		} else if (hpd_link_status == ISR_HPD_REPLUG_COUNT) {
+	if (extra_status == DRM_CONNECTOR_DP_IRQ_HPD ||
+	    hpd_link_status == ISR_IRQ_HPD_PULSE_COUNT) {
+		msm_dp_irq_hpd_handle(dp);
+	} else if (status == connector_status_connected) {
+		if (hpd_link_status == ISR_HPD_REPLUG_COUNT) {
 			msm_dp_hpd_unplug_handle(dp);
 			msm_dp_hpd_plug_handle(dp);
 		} else {
diff --git a/drivers/soc/qcom/pmic_glink_altmode.c b/drivers/soc/qcom/pmic_glink_altmode.c
index 946eb20b8f83..28ab8cbb5ef9 100644
--- a/drivers/soc/qcom/pmic_glink_altmode.c
+++ b/drivers/soc/qcom/pmic_glink_altmode.c
@@ -373,11 +373,15 @@ static void pmic_glink_altmode_worker(struct work_struct *work)
 		else
 			conn_status = connector_status_disconnected;
 
-		drm_aux_hpd_bridge_notify_extra(&alt_port->bridge->dev,
-						conn_status,
-						alt_port->hpd_irq ?
-						DRM_CONNECTOR_DP_IRQ_HPD :
-						DRM_CONNECTOR_NO_EXTRA_STATUS);
+		if (alt_port->hpd_irq) {
+			drm_aux_hpd_bridge_notify_extra(&alt_port->bridge->dev,
+							connector_status_unknown,
+							DRM_CONNECTOR_DP_IRQ_HPD);
+		} else {
+			drm_aux_hpd_bridge_notify_extra(&alt_port->bridge->dev,
+							conn_status,
+							DRM_CONNECTOR_NO_EXTRA_STATUS);
+		}
 	} else if (alt_port->mux_ctrl == MUX_CTRL_STATE_TUNNELING) {
 		if (alt_port->svid == USB_TYPEC_TBT_SID)
 			pmic_glink_altmode_enable_tbt(altmode, alt_port);

-- 
2.43.0


_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic