Re: [PATCH v3 3/3] arm64: dts: amlogic: add support for Orbbec Zora P1

On Tue, Jul 28, 2026 at 05:16:36PM +0200, Alberto Robazza wrote:
> The Orbbec Zora P1 is an A311D (Meson G12B) board with 2/4 GiB DDR4,
> an Ampak AP6256 combo module (Broadcom BCM43456 Wi-Fi over SDIO and
> BCM4345C5 Bluetooth over UART_A).
> 
> According to the original Linux dts, the board is a modded version
> of the ODROID-N2, with Amlogic A311D instead of the original S922X
> and WiFi and Bluetooth support.
> So the device tree builds on meson-g12b-a311d.dtsi and
> meson-g12b-odroid-n2.dtsi (using same vddcpu values of N2+),
> extended with the board-specific GPIO wiring for the AP6256 handling,
> and some modifications for the led, GPIO_ACTIVE_LOW instead of
> GPIO_ACTIVE_HIGH and different label (it is a green led, not blue as
> in the Odroid N2).
> Add the new DTB to the Makefile.
> 
> Signed-off-by: Alberto Robazza <[email protected]>
> ---
>  arch/arm64/boot/dts/amlogic/Makefile          |   1 +
>  .../boot/dts/amlogic/meson-g12b-zora-p1.dts   | 105 ++++++++++++++++++
>  2 files changed, 106 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-zora-p1.dts
> 
> diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
> index 57bc440fa..83fb38b94 100644
> --- a/arch/arm64/boot/dts/amlogic/Makefile
> +++ b/arch/arm64/boot/dts/amlogic/Makefile
> @@ -40,6 +40,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12b-radxa-zero2.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-bananapi-m2s.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-g12b-ugoos-am6.dtb
> +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-zora-p1.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-kii-pro.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb
>  dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-zora-p1.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-zora-p1.dts
> new file mode 100644
> index 000000000..d003582fd
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12b-zora-p1.dts
> @@ -0,0 +1,105 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2026 Alberto Robazza <[email protected]>
> + */
> +
> +/dts-v1/;
> +
> +#include "meson-g12b-a311d.dtsi"
> +#include "meson-g12b-odroid-n2.dtsi"
> +#include <dt-bindings/leds/common.h>
> +
> +/ {
> +	compatible = "orbbec,zora-p1", "amlogic,a311d", "amlogic,g12b";
> +	model = "Orbbec Zora P1";
> +
> +	leds {
> +		/* Status led on Zora is actually green, same pin as N2, but reversed polarity */
> +		led-blue {
> +			function = LED_FUNCTION_STATUS;
> +			color = <LED_COLOR_ID_GREEN>;
> +			gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_LOW>;
> +		};
> +	};
> +
> +	sdio_pwrseq: sdio-pwrseq {
> +		compatible = "mmc-pwrseq-simple";
> +		reset-gpios = <&gpio GPIOX_16 GPIO_ACTIVE_LOW>;
> +		clocks = <&wifi32k>;
> +		clock-names = "ext_clock";
> +	};
> +
> +	wifi32k: wifi32k {

Please use name for all fixed clocks which matches current format
recommendation: 'clock-<freq>' (see also the pattern in the binding for
any other options).
https://web.git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/clock/fixed-clock.yaml

Or any other reasonable name based on generic prefix. wifi32k is for
sure nothing related to clock...


> +		compatible = "pwm-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <32768>;
> +		pwms = <&pwm_ef 0 30518 0>;
> +	};
> +
> +	sound {
> +		model = "ZORA-P1";
> +	};
> +};

Best regards,
Krzysztof


_______________________________________________
linux-amlogic mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-amlogic