[RESEND PATCH v7 06/16] arm64: dts: st: add i2c1 pins for stm32mp25
Dario Binacchi <[email protected]>
| Newsgroups | org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
Add the i2c1 pins used on MicroGEA-STM32MP257-RMM board. Signed-off-by: Dario Binacchi <[email protected]> --- (no changes since v1) arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi index 456ece7f8ebc..db485b9ed904 100644 --- a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi +++ b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi @@ -203,6 +203,25 @@ pins { }; }; + /omit-if-no-ref/ + i2c1_pins_a: i2c1-0 { + pins { + pinmux = <STM32_PINMUX('G', 13, AF9)>, /* I2C1_SCL */ + <STM32_PINMUX('A', 2, AF10)>; /* I2C1_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + /omit-if-no-ref/ + i2c1_sleep_pins_a: i2c1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* I2C1_SCL */ + <STM32_PINMUX('A', 2, ANALOG)>; /* I2C1_SDA */ + }; + }; + /omit-if-no-ref/ i2c2_pins_a: i2c2-0 { pins { -- 2.43.0