[PATCH v12 11/11] arm64: dts: realtek: Add clock support for RTD1625

Yu-Chun Lin <[email protected]>
Newsgroups org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-clk,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel
Message-ID <[email protected]>
Add the clock controller nodes and osc27m fixed clock for the
Realtek RTD1625 SoC.

Signed-off-by: Yu-Chun Lin <[email protected]>
---
Changes in v12:
- None.
---
 arch/arm64/boot/dts/realtek/kent.dtsi | 33 +++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/arch/arm64/boot/dts/realtek/kent.dtsi b/arch/arm64/boot/dts/realtek/kent.dtsi
index 8d4293cd4c03..409d46a73c91 100644
--- a/arch/arm64/boot/dts/realtek/kent.dtsi
+++ b/arch/arm64/boot/dts/realtek/kent.dtsi
@@ -26,6 +26,15 @@ timer {
 			     <GIC_PPI  9 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	clocks {
+		osc27m: osc {
+			compatible = "fixed-clock";
+			clock-frequency = <27000000>;
+			clock-output-names = "osc27m";
+			#clock-cells = <0>;
+		};
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -141,6 +150,22 @@ rbus: bus@98000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 
+			cc: clock-controller@0 {
+				compatible = "realtek,rtd1625-crt-clk";
+				reg = <0x0 0x900>;
+				clocks = <&osc27m>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+
+			ic: clock-controller@7088 {
+				compatible = "realtek,rtd1625-iso-clk";
+				reg = <0x7088 0x8>;
+				clocks = <&osc27m>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+
 			uart0: serial@7800 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x7800 0x100>;
@@ -166,6 +191,14 @@ isom_pinctrl: pinctrl@146200 {
 				reg = <0x146200 0x34>;
 			};
 
+			iso_s_cc: clock-controller@146310 {
+				compatible = "realtek,rtd1625-iso-s-clk";
+				reg = <0x146310 0x8>;
+				clocks = <&osc27m>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+			};
+
 			ve4_pinctrl: pinctrl@14e000 {
 				compatible = "realtek,rtd1625-ve4-pinctrl";
 				reg = <0x14e000 0x84>;
-- 
2.43.0
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.