[PATCH 0/2] arm64: dts: broadcom: bcm2712: Enable SPI
Gregor Herburger <[email protected]>
| Newsgroups | org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
The RP1 chip, found on the raspberry Pi 5, has nine spi controllers. The
spi0 is routed to the pin header. Add the rp1 nodes and enable it for
the Raspberry Pi 5.
---
Gregor Herburger (2):
arm64: dts: broadcom: rp1: add spi controller
arm64: dts: broadcom: bcm2712-rpi-5-b: add spi0 interface
arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts | 16 +++
arch/arm64/boot/dts/broadcom/rp1-common.dtsi | 119 +++++++++++++++++++++++
2 files changed, 135 insertions(+)
---
base-commit: db2ddb87143519e20a95aa36c60b36107b736a58
change-id: 20260811-bcm2712-spi-644b70fee3bf
Best regards,
--
Gregor Herburger <[email protected]>