[PATCH v2 1/2] ARM: dts: mba6ulx: Add Ethernet PHY interrupt support

With commit 417b0f8d08f87 ("gpio: pca953x: Add support for level-triggered
interrupts") the GPIO expander gained support for level-low interrupts
required for Ethernet PHYs

Signed-off-by: Alexander Stein <[email protected]>
---
Changes in v2:
* Remove superfluous gpio-hogs

 arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi | 16 ++++------------
 1 file changed, 4 insertions(+), 12 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi
index f0f886f2b8cfd..bec72dc6bab6c 100644
--- a/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi
@@ -230,6 +230,8 @@ ethphy0: ethernet-phy@0 {
 			clocks = <&clks IMX6UL_CLK_ENET_REF>;
 			reg = <0>;
 			max-speed = <100>;
+			interrupt-parent = <&expander_in0>;
+			interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
 		};
 
 		ethphy1: ethernet-phy@1 {
@@ -237,6 +239,8 @@ ethphy1: ethernet-phy@1 {
 			clocks = <&clks IMX6UL_CLK_ENET2_REF_125M>;
 			reg = <1>;
 			max-speed = <100>;
+			interrupt-parent = <&expander_in0>;
+			interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
 		};
 	};
 };
@@ -276,18 +280,6 @@ expander_in0: gpio-expander@21 {
 		gpio-controller;
 		#gpio-cells = <2>;
 		vcc-supply = <&reg_mba6ul_3v3>;
-
-		enet1_int-hog {
-			gpio-hog;
-			gpios = <6 0>;
-			input;
-		};
-
-		enet2_int-hog {
-			gpio-hog;
-			gpios = <7 0>;
-			input;
-		};
 	};
 
 	expander_out1: gpio-expander@22 {
-- 
2.55.0