[PATCH v6 06/12] ARM: dts: aspeed: anacapa: Add eeprom device node for NFC adaptor board
Colin Huang via B4 Relay <[email protected]>
| Newsgroups | org.infradead.lists.linux-arm-kernel,org.kernel.feeds.b4-sent,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel,org.ozlabs.lists.linux-aspeed |
|---|---|
| Message-ID | <20260825-anacapa-devlop-phase-devicetree-v6-6-9059a2a279ce@gmail.com> |
From: Carl Lee <[email protected]> Add eeprom device node for NFC adaptor board FRU. Signed-off-by: Carl Lee <[email protected]> --- .../boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts index d2b4855ff1ad..22f79a2c2639 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa-evt2.dts @@ -22,6 +22,19 @@ eeprom@51 { }; }; +// MB +&i2c13 { + i2c-mux@70 { + i2c@7 { + // NFC adaptor board FRU + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + }; + }; +}; + &sgpiom0 { bus-frequency = <2000000>; gpio-line-names = -- 2.34.1