[PATCH v10 0/9] Add support for NXP P3H2x4x I3C hub driver

This series adds a driver for the NXP P3H2x4x family of multiport I3C hub
devices.

This is an MFD driver integrating I3C hub and on-die regulators.

The series introduces:
- Core I3C master enhancements required for hub support
- Generic I3C hub framework
- MFD driver with regulator and I3C hub child drivers for the P3H2x4x I3C hub

Changes in v10:
- Rename i3c_master_reattach_i3c_dev() to *_locked to reflect required
  bus locking
- Rename i3c_master_direct_attach_i3c_dev() and i3c_master_direct_detach_i3c_dev()
  to *_locked, as these APIs must be called with the bus lock held for write
- Drop redundant is_p3h2x4x_in_i3c flag from p3h2840.h
- Remove unnecessary ibi_lock handling in request/enable/disable/free
  IBI APIs
- Remove redundant parent pointer from struct i3c_hub and derive upstream 
  master from hub_dev
- Split SMBus target/slave mode support, including IBI and MCTP receive handling,
  into a separate patch
- Link to v9: https://lore.kernel.org/linux-i3c/[email protected]/T/#u

Changes in v9:
- Renamed macros to follow consistent uppercase naming conventions
- Made REGMAP selects in the P3H2X4X MFD Kconfig conditional, to avoid I3C/I2C dependency issues
- Referenced i3c.yaml and i2c-controller.yaml for child bus nodes
- Dropped unnecessary #address-cells and #size-cells from child nodes
- Added CONFIG_I2C_SLAVE guards where necessary to avoid build errors when I2C slave support is disabled
- Link to v8: https://lore.kernel.org/linux-i3c/[email protected]/T/#u

Changes in v8:
- Add compatible in i3c example
- Link to v7: https://lore.kernel.org/linux-i3c/[email protected]/T/#u

Changes in v7:
- Fix kernel-doc warnings across I3C core and hub code
- Rework DT binding schema and examples to pass dt_binding_check
- Update MFD Kconfig to use I3C_OR_I2C
- Convert CONFIG_I3C_HUB to tristate
- Remove unnecessary CONFIG_I2C_SLAVE guards
- Replace custom helpers with find_closest()
- Use devm_regulator_get_enable_optional()
- Link to v6: https://lore.kernel.org/linux-i3c/[email protected]/T/#u

Changes in v6:
- Update DT binding with vendor-prefixed properties
- Add generic I3C hub support
- Remove generic code from P3H2x4x driver
- Link to v5: https://lore.kernel.org/linux-i3c/[email protected]/T/#u

Changes in v5:
- Update supply naming and descriptions
- Improve MFD Kconfig/Makefile ordering
- Link to v4: https://lore.kernel.org/linux-i3c/[email protected]/T/#u

Changes in v4:
- Split driver into MFD, regulator and I3C hub parts
- Update I3C master for hub support
- Fix DT binding issues
- Link to v3: https://lore.kernel.org/linux-i3c/20250811-bittern-of-abstract-prestige-aaeda9@kuoka/T/#u

Changes in v3:
- Add MFD support for hub and regulators
- Add regulator integration
- Link to v2: https://lore.kernel.org/linux-i3c/[email protected]/T/#u

Changes in v2:
- Fix DT binding warnings
- Refine DT parsing logic
- Link to v1: https://lore.kernel.org/linux-i3c/[email protected]/T/#u

Aman Kumar Pandey (6):
  i3c: master: Expose the APIs to support I3C hub
  i3c: master: Add APIs for I3C hub support
  dt-bindings: i3c: Add NXP P3H2x4x i3c-hub support
  mfd: p3h2x4x: Add driver for NXP P3H2x4x i3c hub and on-die regulator
  regulator: p3h2x4x: Add driver for on-die regulators in NXP P3H2x4x
    i3c hub
  i3c: hub: p3h2x4x: Add support for NXP P3H2x4x I3C hub functionality

Lakshay Piplani (3):
  i3c: master: rename i3c_master_reattach_i3c_dev() to *_locked
  i3c: hub: Add support for the I3C interface in the I3C hub
  i3c: hub: p3h2x4x: Add SMBus slave mode support

 .../devicetree/bindings/i3c/nxp,p3h2840.yaml  | 291 +++++++++++
 MAINTAINERS                                   |  15 +
 drivers/i3c/Kconfig                           |  16 +
 drivers/i3c/Makefile                          |   2 +
 drivers/i3c/hub.c                             | 465 ++++++++++++++++++
 drivers/i3c/hub/Kconfig                       |  11 +
 drivers/i3c/hub/Makefile                      |   4 +
 drivers/i3c/hub/p3h2840_i3c_hub.h             | 337 +++++++++++++
 drivers/i3c/hub/p3h2840_i3c_hub_common.c      | 353 +++++++++++++
 drivers/i3c/hub/p3h2840_i3c_hub_i3c.c         | 141 ++++++
 drivers/i3c/hub/p3h2840_i3c_hub_smbus.c       | 450 +++++++++++++++++
 drivers/i3c/master.c                          | 179 ++++++-
 drivers/mfd/Kconfig                           |  13 +
 drivers/mfd/Makefile                          |   1 +
 drivers/mfd/p3h2840.c                         | 122 +++++
 drivers/regulator/Kconfig                     |  10 +
 drivers/regulator/Makefile                    |   1 +
 drivers/regulator/p3h2840_i3c_hub_regulator.c | 218 ++++++++
 include/linux/i3c/device.h                    |   1 +
 include/linux/i3c/hub.h                       |  99 ++++
 include/linux/i3c/master.h                    |   9 +
 include/linux/mfd/p3h2840.h                   |  26 +
 22 files changed, 2761 insertions(+), 3 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/i3c/nxp,p3h2840.yaml
 create mode 100644 drivers/i3c/hub.c
 create mode 100644 drivers/i3c/hub/Kconfig
 create mode 100644 drivers/i3c/hub/Makefile
 create mode 100644 drivers/i3c/hub/p3h2840_i3c_hub.h
 create mode 100644 drivers/i3c/hub/p3h2840_i3c_hub_common.c
 create mode 100644 drivers/i3c/hub/p3h2840_i3c_hub_i3c.c
 create mode 100644 drivers/i3c/hub/p3h2840_i3c_hub_smbus.c
 create mode 100644 drivers/mfd/p3h2840.c
 create mode 100644 drivers/regulator/p3h2840_i3c_hub_regulator.c
 create mode 100644 include/linux/i3c/hub.h
 create mode 100644 include/linux/mfd/p3h2840.h

-- 
2.25.1


-- 
linux-i3c mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-i3c