Re: [PATCH v4 08/12] i3c: dw-i3c-master: Add a quirk to skip clock and reset

Philipp Zabel <[email protected]>
Newsgroups org.infradead.lists.linux-i3c,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-hwmon,org.kernel.vger.linux-kernel,org.kernel.vger.linux-tegra
Message-ID <[email protected]>
On Di, 2026-06-16 at 09:54 +0000, Akhil R wrote:
> Some ACPI-enumerated devices like Tegra410 do not have clock and reset
> resources exposed via the clk/reset frameworks. Unlike device tree,
> ACPI on Arm does not model such provider functions. The hardware is
> expected to be brought out of reset and have its clocks enabled by the
> firmware before the OS takes over. Any data to be shared with the OS is
> passed using the _DSD property.
> 
> Add match data for such devices to skip acquiring clock and reset controls
> during probe and read the clock rate from the "clock-frequency" _DSD
> property. Note that the "clock-frequency" here is the controller's core
> clock and not the bus speed. I3C specifies the bus speed separately using
> "i3c-scl-hz" and "i2c-scl-hz" and hence this should not cause any conflict.
> 
> Also, move match data parsing before clock/reset acquisition so the quirk
> is available early enough.
> 
> Signed-off-by: Akhil R <[email protected]>
> ---
>  drivers/i3c/master/dw-i3c-master.c | 66 ++++++++++++++++++++----------
>  1 file changed, 44 insertions(+), 22 deletions(-)
> 
> diff --git a/drivers/i3c/master/dw-i3c-master.c b/drivers/i3c/master/dw-i3c-master.c
> index 3e510fddf06c..a2a4b88c2017 100644
> --- a/drivers/i3c/master/dw-i3c-master.c
> +++ b/drivers/i3c/master/dw-i3c-master.c
> @@ -242,6 +242,7 @@
>  /* List of quirks */
>  #define AMD_I3C_OD_PP_TIMING		BIT(1)
>  #define DW_I3C_DISABLE_RUNTIME_PM_QUIRK	BIT(2)
> +#define DW_I3C_ACPI_SKIP_CLK_RST		BIT(3)
>  
>  struct dw_i3c_cmd {
>  	u32 cmd_lo;
> @@ -556,13 +557,28 @@ static void dw_i3c_master_set_intr_regs(struct dw_i3c_master *master)
>  	writel(IBI_REQ_REJECT_ALL, master->regs + IBI_MR_REQ_REJECT);
>  }
>  
> +static unsigned long dw_i3c_master_get_core_rate(struct dw_i3c_master *master)
> +{
> +	unsigned int core_rate_prop;
> +
> +	if (!(master->quirks & DW_I3C_ACPI_SKIP_CLK_RST))
> +		return clk_get_rate(master->core_clk);
> +
> +	if (device_property_read_u32(master->dev, "clock-frequency", &core_rate_prop)) {
> +		dev_err(master->dev, "missing clock-frequency property\n");
> +		return 0;
> +	}
> +
> +	return core_rate_prop;
> +}
> +
>  static int dw_i3c_clk_cfg(struct dw_i3c_master *master)
>  {
>  	unsigned long core_rate, core_period;
>  	u32 scl_timing;
>  	u8 hcnt, lcnt;
>  
> -	core_rate = clk_get_rate(master->core_clk);
> +	core_rate = dw_i3c_master_get_core_rate(master);
>  	if (!core_rate)
>  		return -EINVAL;
>  
> @@ -615,7 +631,7 @@ static int dw_i2c_clk_cfg(struct dw_i3c_master *master)
>  	u16 hcnt, lcnt;
>  	u32 scl_timing;
>  
> -	core_rate = clk_get_rate(master->core_clk);
> +	core_rate = dw_i3c_master_get_core_rate(master);
>  	if (!core_rate)
>  		return -EINVAL;
>  
> @@ -1577,18 +1593,33 @@ int dw_i3c_common_probe(struct dw_i3c_master *master,
>  	if (IS_ERR(master->regs))
>  		return PTR_ERR(master->regs);
>  
> -	master->core_clk = devm_clk_get_enabled(&pdev->dev, NULL);
> -	if (IS_ERR(master->core_clk))
> -		return PTR_ERR(master->core_clk);
> -
> -	master->pclk = devm_clk_get_optional_enabled(&pdev->dev, "pclk");
> -	if (IS_ERR(master->pclk))
> -		return PTR_ERR(master->pclk);
> +	if (has_acpi_companion(&pdev->dev)) {
> +		quirks = (unsigned long)device_get_match_data(&pdev->dev);
> +	} else if (pdev->dev.of_node) {
> +		drvdata = device_get_match_data(&pdev->dev);
> +		if (drvdata)
> +			quirks = drvdata->flags;
> +	}
> +	master->quirks = quirks;
>  
> -	master->core_rst = devm_reset_control_get_optional_exclusive_deasserted(&pdev->dev,
> -										"core_rst");
> -	if (IS_ERR(master->core_rst))
> -		return PTR_ERR(master->core_rst);
> +	if (master->quirks & DW_I3C_ACPI_SKIP_CLK_RST) {
> +		master->core_clk = NULL;
> +		master->pclk = NULL;
> +		master->core_rst = NULL;
> +	} else {
> +		master->core_clk = devm_clk_get_enabled(&pdev->dev, NULL);
> +		if (IS_ERR(master->core_clk))
> +			return PTR_ERR(master->core_clk);
> +
> +		master->pclk = devm_clk_get_optional_enabled(&pdev->dev, "pclk");
> +		if (IS_ERR(master->pclk))
> +			return PTR_ERR(master->pclk);
> +
> +		master->core_rst = devm_reset_control_get_optional_exclusive_deasserted(&pdev->dev,
> +											"core_rst");
> +		if (IS_ERR(master->core_rst))
> +			return PTR_ERR(master->core_rst);

Why does this need to move around at all?

The reset control is already optional, so I would expect this to set
core_rst to NULL on missing reset, no quirk necessary.

Same question for pclk. Wouldn't it be enough to make core_clk optional
as well?

regards
Philipp

-- 
linux-i3c mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-i3c
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.