[PATCH v14 3/8] dt-bindings: i3c: Add NXP P3H2x4x i3c-hub support
Lakshay Piplani <[email protected]> Tue, 14 Jul 2026 14:50:48 +0530
| Newsgroups | org.infradead.lists.linux-i3c,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
From: Aman Kumar Pandey <[email protected]> Add bindings for the NXP P3H2x4x (P3H2440/P3H2441/P3H2840/P3H2841) multiport I3C hub family. These devices connect to a host via I3C/I2C/SMBus and allow communication with multiple downstream peripherals. Signed-off-by: Aman Kumar Pandey <[email protected]> Signed-off-by: Vikash Bansal <[email protected]> Signed-off-by: Lakshay Piplani <[email protected]> Reviewed-by: Rob Herring (Arm) <[email protected]> Reviewed-by: Frank Li <[email protected]> --- Changes in v14: - No change Changes in v13: - Fix mismatch between example unit-address and reg property by correcting the reg value to match the node name Changes in v12: - No change, added Reviewed-By tag Changes in v11: - No change Changes in v10: - No change, added Reviewed-By tag Changes in v9: - Referenced i3c.yaml and i2c-controller.yaml for child nodes - Dropped unnecessary #address-cells and #size-cells from child nodes Changes in v8: - Add compatible in i3c example Changes in v7: - Fix schema validation issues - Adjust required properties - Add I2C example Changes in v6: - Use a vendor prefix for the attributes Changes in v5: - Removed SW properties: cp0-ldo-microvolt,cp1-ldo-microvolt, tp0145-ldo-microvolt, tp2367-ldo-microvolt - Changed supply entries and its descriptions Changes in v4: - Fixed DT binding check warning - Removed SW properties: ibi-enable, local-dev, and always-enable Changes in v3: - Added MFD (Multi-Function Device) support for I3C hub and on-die regulator - Added Regulator supply node Changes in v2: - Fixed DT binding check warning - Revised logic for parsing DTS nodes --- --- .../devicetree/bindings/i3c/nxp,p3h2840.yaml | 291 ++++++++++++++++++ MAINTAINERS | 9 + 2 files changed, 300 insertions(+) create mode 100644 Documentation/devicetree/bindings/i3c/nxp,p3h2840.yaml diff --git a/Documentation/devicetree/bindings/i3c/nxp,p3h2840.yaml b/Documentation/devicetree/bindings/i3c/nxp,p3h2840.yaml new file mode 100644 index 000000000000..f7f0752de533 --- /dev/null +++ b/Documentation/devicetree/bindings/i3c/nxp,p3h2840.yaml @@ -0,0 +1,291 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2025 NXP +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i3c/nxp,p3h2840.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP P3H2X4X I3C HUB + +maintainers: + - Aman Kumar Pandey <[email protected]> + - Vikash Bansal <[email protected]> + - Lakshay Piplani <[email protected]> + +description: | + P3H2x4x (P3H2440/P3H2441/P3H2840/P3H2841) is a family of multiport I3C + hub devices that connect to:- + 1. A host CPU via I3C/I2C/SMBus bus on upstream side and connect to multiple + peripheral devices on the downstream side. + 2. Have two Controller Ports which can support either + I2C/SMBus or I3C buses and connect to a CPU, BMC or SOC. + 3. P3H2840/ P3H2841 are 8 port I3C hub with eight I3C/I2C Target Port. + 4. P3H2440/ P3H2441 are 4 port I3C hub with four I3C/I2C Target Port. + Target ports can be configured as I2C/SMBus, I3C or GPIO and connect to + peripherals. + +properties: + compatible: + const: nxp,p3h2840 + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + assigned-address: + maximum: 0x7f + + nxp,tp0145-pullup-ohms: + description: + Selects the pull up resistance for target Port 0/1/4/5, in ohms. + enum: [250, 500, 1000, 2000] + default: 500 + + nxp,tp2367-pullup-ohms: + description: + Selects the pull up resistance for target Port 2/3/6/7, in ohms. + enum: [250, 500, 1000, 2000] + default: 500 + + nxp,cp0-io-strength-ohms: + description: + Selects the IO drive strength for controller Port 0, in ohms. + enum: [20, 30, 40, 50] + default: 20 + + nxp,cp1-io-strength-ohms: + description: + Selects the IO drive strength for controller Port 1, in ohms. + enum: [20, 30, 40, 50] + default: 20 + + nxp,tp0145-io-strength-ohms: + description: + Selects the IO drive strength for target port 0/1/4/5, in ohms. + enum: [20, 30, 40, 50] + default: 20 + + nxp,tp2367-io-strength-ohms: + description: + Selects the IO drive strength for target port 2/3/6/7, in ohms. + enum: [20, 30, 40, 50] + default: 20 + + vcc1-supply: + description: Controller port 0 power supply. + + vcc2-supply: + description: Controller port 1 power supply. + + vcc3-supply: + description: Target port 0/1/4/5 power supply. + + vcc4-supply: + description: Target port 2/3/6/7 power supply. + + regulators: + type: object + additionalProperties: false + + properties: + ldo-cp0: + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + ldo-cp1: + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + ldo-tpg0: + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + ldo-tpg1: + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + +required: + - reg + +patternProperties: + "^i3c@[0-7]$": + type: object + $ref: /schemas/i3c/i3c.yaml# + unevaluatedProperties: false + + properties: + reg: + description: + The I3C HUB Target Port number. + maximum: 7 + + nxp,pullup-enable: + type: boolean + description: + Enables the on-die pull-up for Target Port. + + required: + - reg + + "^(i2c|smbus)@[0-7]$": + type: object + $ref: /schemas/i2c/i2c-controller.yaml# + unevaluatedProperties: false + + properties: + reg: + description: + The I3C HUB Target Port number. + maximum: 7 + + nxp,pullup-enable: + type: boolean + description: + Enables the on-die pull-up for Target Port. + + required: + - reg + +unevaluatedProperties: false + +examples: + - | + i3c { + #address-cells = <3>; + #size-cells = <0>; + + hub@70,236153000c2 { + reg = <0x70 0x236 0x153000c2>; + compatible = "nxp,p3h2840"; + #address-cells = <1>; + #size-cells = <0>; + assigned-address = <0x50>; + + nxp,tp0145-pullup-ohms = <1000>; + nxp,tp2367-pullup-ohms = <1000>; + nxp,cp0-io-strength-ohms = <50>; + nxp,cp1-io-strength-ohms = <50>; + nxp,tp0145-io-strength-ohms = <50>; + nxp,tp2367-io-strength-ohms = <50>; + vcc3-supply = <®_tpg0>; + vcc4-supply = <®_tpg1>; + + regulators { + reg_cp0: ldo-cp0 { + regulator-name = "ldo-cp0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_cp1: ldo-cp1 { + regulator-name = "ldo-cp1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_tpg0: ldo-tpg0 { + regulator-name = "ldo-tpg0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_tpg1: ldo-tpg1 { + regulator-name = "ldo-tpg1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + smbus@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + nxp,pullup-enable; + }; + + i2c@1 { + reg = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + nxp,pullup-enable; + }; + + i3c@2 { + reg = <0x2>; + #address-cells = <3>; + #size-cells = <0>; + nxp,pullup-enable; + }; + }; + }; + + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hub@70 { + reg = <0x70>; + compatible = "nxp,p3h2840"; + #address-cells = <1>; + #size-cells = <0>; + + nxp,tp0145-pullup-ohms = <1000>; + nxp,tp2367-pullup-ohms = <1000>; + nxp,cp0-io-strength-ohms = <50>; + nxp,cp1-io-strength-ohms = <50>; + nxp,tp0145-io-strength-ohms = <50>; + nxp,tp2367-io-strength-ohms = <50>; + vcc3-supply = <®_tpg0_i2c>; + vcc4-supply = <®_tpg1_i2c>; + + regulators { + reg_cp0_i2c: ldo-cp0 { + regulator-name = "ldo-cp0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_cp1_i2c: ldo-cp1 { + regulator-name = "ldo-cp1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_tpg0_i2c: ldo-tpg0 { + regulator-name = "ldo-tpg0"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + reg_tpg1_i2c: ldo-tpg1 { + regulator-name = "ldo-tpg1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + smbus@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + nxp,pullup-enable; + }; + + i2c@1 { + reg = <0x1>; + #address-cells = <1>; + #size-cells = <0>; + nxp,pullup-enable; + }; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index c2c6d79275c6..ba65ae5a008b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19303,6 +19303,15 @@ S: Maintained F: Documentation/devicetree/bindings/ptp/nxp,ptp-netc.yaml F: drivers/ptp/ptp_netc.c +NXP P3H2X4X I3C-HUB DRIVER +M: Vikash Bansal <[email protected]> +M: Aman Kumar Pandey <[email protected]> +M: Lakshay Piplani <[email protected]> +L: [email protected] +L: [email protected] +S: Maintained +F: Documentation/devicetree/bindings/i3c/nxp,p3h2840.yaml + NXP PF5300/PF5301/PF5302 PMIC REGULATOR DEVICE DRIVER M: Woodrow Douglass <[email protected]> S: Maintained -- 2.25.1 -- linux-i3c mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-i3c