[PATCH v7 02/12] i3c: master: Use unified device property interface

Replace all OF-specific functions with unified device property functions
as a prerequisite to support both ACPI and device tree.

Reviewed-by: Frank Li <[email protected]>
Signed-off-by: Akhil R <[email protected]>
---
 drivers/i3c/master.c       | 77 +++++++++++++++++++++-----------------
 include/linux/i3c/master.h |  5 ++-
 2 files changed, 46 insertions(+), 36 deletions(-)

diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
index f1be38a640ca..4b3d9628bc39 100644
--- a/drivers/i3c/master.c
+++ b/drivers/i3c/master.c
@@ -13,10 +13,12 @@
 #include <linux/dma-mapping.h>
 #include <linux/err.h>
 #include <linux/export.h>
+#include <linux/i2c.h>
 #include <linux/kernel.h>
 #include <linux/list.h>
 #include <linux/of.h>
 #include <linux/pm_runtime.h>
+#include <linux/property.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/workqueue.h>
@@ -491,7 +493,7 @@ static void i3c_bus_cleanup(struct i3c_bus *i3cbus)
 	mutex_unlock(&i3c_core_lock);
 }
 
-static int i3c_bus_init(struct i3c_bus *i3cbus, struct device_node *np)
+static int i3c_bus_init(struct i3c_bus *i3cbus, struct fwnode_handle *fwnode)
 {
 	int ret, start, end, id = -1;
 
@@ -501,8 +503,8 @@ static int i3c_bus_init(struct i3c_bus *i3cbus, struct device_node *np)
 	i3c_bus_init_addrslots(i3cbus);
 	i3cbus->mode = I3C_BUS_MODE_PURE;
 
-	if (np)
-		id = of_alias_get_id(np, "i3c");
+	if (fwnode && is_of_node(fwnode))
+		id = of_alias_get_id(to_of_node(fwnode), "i3c");
 
 	mutex_lock(&i3c_core_lock);
 	if (id >= 0) {
@@ -837,7 +839,7 @@ static void i3c_masterdev_release(struct device *dev)
 	WARN_ON(!list_empty(&bus->devs.i2c) || !list_empty(&bus->devs.i3c));
 	i3c_bus_cleanup(bus);
 
-	of_node_put(dev->of_node);
+	fwnode_handle_put(dev->fwnode);
 }
 
 static const struct device_type i3c_masterdev_type = {
@@ -1044,7 +1046,7 @@ static void i3c_device_release(struct device *dev)
 
 	WARN_ON(i3cdev->desc);
 
-	of_node_put(i3cdev->dev.of_node);
+	fwnode_handle_put(dev->fwnode);
 	kfree(i3cdev);
 }
 
@@ -1928,7 +1930,7 @@ i3c_master_register_new_i3c_devs(struct i3c_master_controller *master)
 			     desc->info.pid);
 
 		if (desc->boardinfo)
-			desc->dev->dev.of_node = desc->boardinfo->of_node;
+			device_set_node(&desc->dev->dev, desc->boardinfo->fwnode);
 
 		ret = device_register(&desc->dev->dev);
 		if (ret) {
@@ -2620,8 +2622,8 @@ EXPORT_SYMBOL_GPL(i3c_master_do_daa);
 #define OF_I3C_REG1_IS_I2C_DEV			BIT(31)
 
 static int
-of_i3c_master_add_i2c_boardinfo(struct i3c_master_controller *master,
-				struct device_node *node, u32 *reg)
+i3c_master_add_i2c_boardinfo(struct i3c_master_controller *master,
+			     struct fwnode_handle *fwnode, u32 *reg)
 {
 	struct i2c_dev_boardinfo *boardinfo;
 	struct device *dev = &master->dev;
@@ -2631,9 +2633,13 @@ of_i3c_master_add_i2c_boardinfo(struct i3c_master_controller *master,
 	if (!boardinfo)
 		return -ENOMEM;
 
-	ret = of_i2c_get_board_info(dev, node, &boardinfo->base);
-	if (ret)
-		return ret;
+	if (is_of_node(fwnode)) {
+		ret = of_i2c_get_board_info(dev, to_of_node(fwnode), &boardinfo->base);
+		if (ret)
+			return ret;
+	} else {
+		return -EINVAL;
+	}
 
 	/*
 	 * The I3C Specification does not clearly say I2C devices with 10-bit
@@ -2649,14 +2655,14 @@ of_i3c_master_add_i2c_boardinfo(struct i3c_master_controller *master,
 	boardinfo->lvr = reg[2];
 
 	list_add_tail(&boardinfo->node, &master->boardinfo.i2c);
-	of_node_get(node);
+	fwnode_handle_get(fwnode);
 
 	return 0;
 }
 
 static int
-of_i3c_master_add_i3c_boardinfo(struct i3c_master_controller *master,
-				struct device_node *node, u32 *reg)
+i3c_master_add_i3c_boardinfo(struct i3c_master_controller *master,
+			     struct fwnode_handle *fwnode, u32 *reg)
 {
 	struct i3c_dev_boardinfo *boardinfo;
 	struct device *dev = &master->dev;
@@ -2679,7 +2685,7 @@ of_i3c_master_add_i3c_boardinfo(struct i3c_master_controller *master,
 
 	boardinfo->static_addr = reg[0];
 
-	if (!of_property_read_u32(node, "assigned-address", &init_dyn_addr)) {
+	if (!fwnode_property_read_u32(fwnode, "assigned-address", &init_dyn_addr)) {
 		if (init_dyn_addr > I3C_MAX_ADDR)
 			return -EINVAL;
 
@@ -2696,14 +2702,14 @@ of_i3c_master_add_i3c_boardinfo(struct i3c_master_controller *master,
 		return -EINVAL;
 
 	boardinfo->init_dyn_addr = init_dyn_addr;
-	boardinfo->of_node = of_node_get(node);
+	boardinfo->fwnode = fwnode_handle_get(fwnode);
 	list_add_tail(&boardinfo->node, &master->boardinfo.i3c);
 
 	return 0;
 }
 
-static int of_i3c_master_add_dev(struct i3c_master_controller *master,
-				 struct device_node *node)
+static int i3c_master_add_dev(struct i3c_master_controller *master,
+			      struct fwnode_handle *fwnode)
 {
 	u32 reg[3];
 	int ret;
@@ -2711,7 +2717,7 @@ static int of_i3c_master_add_dev(struct i3c_master_controller *master,
 	if (!master)
 		return -EINVAL;
 
-	ret = of_property_read_u32_array(node, "reg", reg, ARRAY_SIZE(reg));
+	ret = fwnode_property_read_u32_array(fwnode, "reg", reg, ARRAY_SIZE(reg));
 	if (ret)
 		return ret;
 
@@ -2720,25 +2726,25 @@ static int of_i3c_master_add_dev(struct i3c_master_controller *master,
 	 * dealing with an I2C device.
 	 */
 	if (!reg[1])
-		ret = of_i3c_master_add_i2c_boardinfo(master, node, reg);
+		ret = i3c_master_add_i2c_boardinfo(master, fwnode, reg);
 	else
-		ret = of_i3c_master_add_i3c_boardinfo(master, node, reg);
+		ret = i3c_master_add_i3c_boardinfo(master, fwnode, reg);
 
 	return ret;
 }
 
-static int of_populate_i3c_bus(struct i3c_master_controller *master)
+static int fwnode_populate_i3c_bus(struct i3c_master_controller *master)
 {
 	struct device *dev = &master->dev;
-	struct device_node *i3cbus_np = dev->of_node;
+	struct fwnode_handle *fwnode = dev_fwnode(dev);
 	int ret;
 	u32 val;
 
-	if (!i3cbus_np)
+	if (!fwnode)
 		return 0;
 
-	for_each_available_child_of_node_scoped(i3cbus_np, node) {
-		ret = of_i3c_master_add_dev(master, node);
+	fwnode_for_each_available_child_node_scoped(fwnode, child) {
+		ret = i3c_master_add_dev(master, child);
 		if (ret)
 			return ret;
 	}
@@ -2748,10 +2754,10 @@ static int of_populate_i3c_bus(struct i3c_master_controller *master)
 	 * on the bus are not supporting typical rates, or if the bus topology
 	 * prevents it from using max possible rate.
 	 */
-	if (!of_property_read_u32(i3cbus_np, "i2c-scl-hz", &val))
+	if (!device_property_read_u32(dev, "i2c-scl-hz", &val))
 		master->bus.scl_rate.i2c = val;
 
-	if (!of_property_read_u32(i3cbus_np, "i3c-scl-hz", &val))
+	if (!device_property_read_u32(dev, "i3c-scl-hz", &val))
 		master->bus.scl_rate.i3c = val;
 
 	return 0;
@@ -2806,7 +2812,7 @@ static u8 i3c_master_i2c_get_lvr(struct i2c_client *client)
 	u8 lvr = I3C_LVR_I2C_INDEX(2) | I3C_LVR_I2C_FM_MODE;
 	u32 reg[3];
 
-	if (!of_property_read_u32_array(client->dev.of_node, "reg", reg, ARRAY_SIZE(reg)))
+	if (!fwnode_property_read_u32_array(client->dev.fwnode, "reg", reg, ARRAY_SIZE(reg)))
 		lvr = reg[2];
 
 	return lvr;
@@ -2925,7 +2931,8 @@ static int i3c_master_i2c_adapter_init(struct i3c_master_controller *master)
 	struct i2c_adapter *adap = i3c_master_to_i2c_adapter(master);
 	struct i2c_dev_desc *i2cdev;
 	struct i2c_dev_boardinfo *i2cboardinfo;
-	int ret, id;
+	struct fwnode_handle *fwnode = dev_fwnode(&master->dev);
+	int ret, id = -1;
 
 	adap->dev.parent = master->dev.parent;
 	adap->owner = master->dev.parent->driver->owner;
@@ -2934,7 +2941,9 @@ static int i3c_master_i2c_adapter_init(struct i3c_master_controller *master)
 	adap->timeout = HZ;
 	adap->retries = 3;
 
-	id = of_alias_get_id(master->dev.of_node, "i2c");
+	if (fwnode && is_of_node(fwnode))
+		id = of_alias_get_id(to_of_node(fwnode), "i2c");
+
 	if (id >= 0) {
 		adap->nr = id;
 		ret = i2c_add_numbered_adapter(adap);
@@ -3235,7 +3244,7 @@ int i3c_master_register(struct i3c_master_controller *master,
 		return ret;
 
 	master->dev.parent = parent;
-	master->dev.of_node = of_node_get(parent->of_node);
+	device_set_node(&master->dev, fwnode_handle_get(dev_fwnode(parent)));
 	master->dev.bus = &i3c_bus_type;
 	master->dev.type = &i3c_masterdev_type;
 	master->dev.release = i3c_masterdev_release;
@@ -3254,13 +3263,13 @@ int i3c_master_register(struct i3c_master_controller *master,
 	master->dev.coherent_dma_mask = parent->coherent_dma_mask;
 	master->dev.dma_parms = parent->dma_parms;
 
-	ret = i3c_bus_init(i3cbus, master->dev.of_node);
+	ret = i3c_bus_init(i3cbus, dev_fwnode(&master->dev));
 	if (ret)
 		goto err_put_dev;
 
 	dev_set_name(&master->dev, "i3c-%d", i3cbus->id);
 
-	ret = of_populate_i3c_bus(master);
+	ret = fwnode_populate_i3c_bus(master);
 	if (ret)
 		goto err_put_dev;
 
diff --git a/include/linux/i3c/master.h b/include/linux/i3c/master.h
index 4d2a68793324..a16deb04b2e1 100644
--- a/include/linux/i3c/master.h
+++ b/include/linux/i3c/master.h
@@ -177,7 +177,8 @@ struct i3c_device_ibi_info {
  * @pid: I3C Provisioned ID exposed by the device. This is a unique identifier
  *	 that may be used to attach boardinfo to i3c_dev_desc when the device
  *	 does not have a static address
- * @of_node: optional DT node in case the device has been described in the DT
+ * @fwnode: Firmware node (DT or ACPI) in case the device has been
+ *	    described in firmware
  *
  * This structure is used to attach board-level information to an I3C device.
  * Not all I3C devices connected on the bus will have a boardinfo. It's only
@@ -189,7 +190,7 @@ struct i3c_dev_boardinfo {
 	u8 init_dyn_addr;
 	u8 static_addr;
 	u64 pid;
-	struct device_node *of_node;
+	struct fwnode_handle *fwnode;
 };
 
 /**
-- 
2.43.0


-- 
linux-i3c mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-i3c