[PATCH v7 12/12] arm64: defconfig: Enable I3C and SPD5118 hwmon

Enable I3C subsystem (I3C), Synopsys DesignWare I3C master controller
(DW_I3C_MASTER), and SPD5118 hwmon temperature sensor (SENSORS_SPD5118)
as modules.

The NVIDIA Vera CPU uses SOCAMM LPDDR5X memory module, which contains
SPD5118 (JEDEC JESD300) compliant temperature sensor. This sensor is
accessible over the I3C bus through the DesignWare I3C controller present
on the SoC. Enabling these configs allows monitoring memory module
temperatures on platforms such as Vera Rubin. Vera is an ACPI-based
platform and does not use device tree.

Signed-off-by: Akhil R <[email protected]>
---
 arch/arm64/configs/defconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index c267f0906460..36a7cafef3a0 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -639,6 +639,8 @@ CONFIG_I2C_UNIPHIER_F=y
 CONFIG_I2C_XILINX=m
 CONFIG_I2C_RCAR=y
 CONFIG_I2C_CROS_EC_TUNNEL=y
+CONFIG_I3C=m
+CONFIG_DW_I3C_MASTER=m
 CONFIG_SPI=y
 CONFIG_SPI_APPLE=m
 CONFIG_SPI_ARMADA_3700=y
@@ -768,6 +770,7 @@ CONFIG_SENSORS_SL28CPLD=m
 CONFIG_SENSORS_AMC6821=m
 CONFIG_SENSORS_INA2XX=m
 CONFIG_SENSORS_INA3221=m
+CONFIG_SENSORS_SPD5118=m
 CONFIG_SENSORS_TMP102=m
 CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
 CONFIG_CPU_THERMAL=y
-- 
2.43.0


-- 
linux-i3c mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-i3c